Hard Head 016937 Garage Furnishings Instruction Manual

016937 Garage Furnishings
Instruction Manual

  Item no 016937

GARAGE FURNISHINGS

OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions). Tula reserves the right to make changes. For the latest version of operating instructions, see www.jula.com

SAFETY INSTRUCTIONS

WARNING
Do not dumb, or stand on the product—risk of personal injury.

• Do not overload the product, this can result in a risk of instability and cause serious personal injury and/or material damage.
• Close the doors before moving the product.
• Keep children at a safe distance.
• The edges of the product can cause cut injuries and/or pinch injuries. Wear gloves during assembly and when moving.
• Keep your fingers, hands, and feet away from the edges when stacking, hanging, or moving parts.
• Never open more than one drawer at once if there are things in the drawers.
• New drawers can be difficult to open at first. Pull out carefully.
• Use the product with care, to avoid it tipping over and/or hitting someone.
• If the unit tips over or hits somebody, this can result in personal injury.
• Do not stand or step in or on the drawers, or climb on the product.
• Never overload the product.
• Move the product only by pushing it forward — do not pull the product.
• Close the lid and lock the drawers and doors before moving the product.
• Do not move the product when there are objects on the work surface.
• Apply the castor brakes when not moving the product.

DESCRIPTION

Flexible basic set with a well-conceived design for furnishing workspaces, such as a garage and basement. Made of cold-rolled, powder-coated steel with a bright finish and a worktop in MDF with a surface layer of melamine.

• 1 tall cabinet (with three shelves inside) 76×49.5×205 cm.
• 1 drawer set (four drawers) 61.6x33x79 cm.
• 1 cupboard unit (two doors) 61.6x33x79 cm.
• 1 worktop 160x50x86 cm.
• 2 wall cupboards 60x40x20 cm.
• 3 shelf (for mounting between the two wall cupboards) 80×17.8×2 cm.
• 6 tool boards (two variants) 60x40x2 cm.
• Adjustable feet (max height 35 mm).
• lockable cupboards and drawers (10 keys included).
• The rolling units are fitted with stable PVC wheels, of which two of four are lockable.
• Mounting fittings are included.
  FIG………………. 1

ACCESSORIES
Hook set with part number 004767 can be bought in Jula’s department stores and at www.jula.com.

ASSEMBLY

GENERAL
Read these instructions carefully before assembly.

• Check that no parts are missing or damaged.
• The product is only intended for indoor use.
• At least two persons are recommended for assembly.
• Wear gloves during assembly to avoid cut injuries —the sheet metal edges can be sharp.
• Do not tighten screw unions until all the screws are in place.

FIG. ………………………….2
FIG……………………………. 3
FIG…………………………….. 4

WALL

1. Drill holes with a 12 mm drill at suitable places to mount the tool board.
2. Remove the nuts, spring, and flat washers from the expansion screws and put the screws in the holes in the wall. Place the mounting holes on the tool board over the expansion screws. Be careful — the risk of dropping.
3. Put the spring and flat washers on the screws and tighten the nuts. Check that the expansion screws fit firmly in the wall.
   FIG…….. 5

CUPBOARD

1. Drill holes with a 12 mm drill at suitable places to mount the cupboard.

2. Remove the nuts, spring, and flat washers from the expansion screws and put the screws in the holes in the wall. Place the mounting holes on the cupboard over the expansion screws. Be careful — the risk of dropping.

3. Put the spring and flat washers on the screws and tighten the nuts. Check that the expansion screws fit firmly in the wall.
   FIG……………..6

4. Put screws for the shelves through the cupboard wall.

5. Tighten the nuts inside the cupboard.
   FIG……………..7

6. Put the shelf brackets in the holes in the door frame.

7. Put the shelves in place and lock them with spring pins underneath.
   FIG……………..8

ACCESSORIES

Hook set part number 004767

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>