SVEN RX-550SW Wireless Computer Mouse User Manual

September 18, 2024
SVEN

SVEN RX-550SW Wireless Computer Mouse

Specifications

  • Model: RX-550SW
  • Connectivity: 2.4GHz and Bluetooth
  • Input Device Type: Mouse

Product Information

Congratulations on purchasing the SVEN mouse! The RX-550SW is an input device designed for entering information into the computer and operating it. It offers the flexibility to switch between 2.4GHz and Bluetooth connectivity modes.
For technical support, visit www.sven.fi.

Product Usage Instructions

Switching Between Modes:
To switch between 2.4GHz and Bluetooth modes:

  1. Ensure the mouse is disconnected from your PC.
  2. Toggle the switch to select the desired mode (2.4GHz or Bluetooth).
  3. Reconnect the mouse to your PC.

Troubleshooting

If you encounter issues with the mouse not working:

  • Disconnect the mouse from your PC and check the connector pins for damage.
  • If no external damage is found, reconnect the mouse to your PC.
  • If the problem persists, contact your nearest authorized service center.

Congratulations on purchasing the SVEN mouse!

Please read this User Manual before using the unit and retain this User Manual in a safe place for future reference.

COPYRIGHT
SVEN PTE. LTD. Version 1.1 (17.07.2024). This Manual and the information contained in it are copyrighted. All rights

TRADEMARKS
All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information in this Manual is given on «as is» terms.
The author and  the publisher do not bear any liability to a person or an organization for loss or damage which has arisen from the information contained

  • Shipping and transportation equipment is permitted only in the original container.
  • Does not require special conditions for realization.
  • Dispose of in accordance with regu-lations for the disposal of household and computer equipment.
  • Do not use gasoline, spirit or other dissol-vents for cleaning. This may cause dam-age to the surface. Clean the device with soft cloth.
  • Do not attempt to disassemble or repair your device.
  • Protect the device against powerful shocks and falls — they may damage the internal electronics.

APPOINTMENT
RX-550SW is an input device. It should be used for input (entering) information into the computer and operation on it.

PACKAGE CONTENTS

  • Wireless mouse — 1 pc
  • 2.4 GHz receiver — 1 pc
  • User manual — 1 pc

SPECIAL FEATURES

  • 60° vertical angle for comfortable wrist posture
  • Dual wireless connection modes (Blue-tooth/receiver)
  • Connection up to 3 devices
  • Silent buttons
  • Built-in 700 mAh battery
  • Dynamic RGB backlight (for switching off press and hold the DPI button)
  • Adjustable resolution up to 2400 DPI
  • Scroll wheel with rubber protector
  • Mouse power switch

SYSTEM REQUIREMENTS

  • Windows
  • Free USB port

SAFETY PRECAUSIONS

Protect your mouse from high humidity, dust or high temperatures.

SWITCH BETWEEN MODES 2.4GHZ AND BLUETOOTH
The mouse has 3 connection modes: 2,4 GHz and 2 Bluetooth channels. For using 2,4 GHz mode make the following:

  • Move the switch to |”ON” position.
  • Press mode button on the mouse bottom until green light will blink slowly.
  • Insert the dongle into a PC USB port. The mouse will connect to your PC in several seconds. For using Bluetooth mode, make the following:
  • Press mode button on the mouse bottom until blue light will blink slowly.
  • Press and hold mode button until blue light will blink fast. It mean Bluetooth pairing mode was activated.
  • Choose on your PC “Bluetooth devices”.
  • Click “Add or delete Bluetooth devices”.
  • As soon as PC will detect new device, click “Pairing (add new device)”, mouse is ready to work.
  • For switching to another Bluetooth channel repeat above actions.

TROUBLESHOOTING

If none of the above mentioned solutions removes the problem, please consult the nearest authorized service center. Never try to repair the device on your own.

WARRANTY CARD

FAQ

  • Q: What should I do if the mouse is not working?
    • Problem: The mouse is not working.
    • Solution:
    • Disconnect the mouse from your PC and check for connector pin damage. If no damage is found, reconnect the mouse.
    • If the issue persists, contact an authorized service center for assistance. Do not attempt to repair the device yourself.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals