GE Lighting 89586LO Multicolor LED Plug In Indoor Christmas String Lights Instructions
- June 13, 2024
- GE Lighting
Table of Contents
GE Lighting 89586LO Multicolor LED Plug In Indoor Christmas String Lights
Product Information
- Product Name: 20 LED Dual Color G-50 Ice Lights
- Model No.: NHL 89586LO
- Manufacturer: GE
- Power Unit: GE branded, Seasonal-Use LED Driver Power Supply, Model TS-8W29V, manufactured by Guang Zhou Ting Shen Electric Co Ltd.
- Power Rating: 19.2 Watts (0.16 Amps)
- Lamp Type: 3.3 Volt, 0.066 Watt, LED
- Usage: Indoor and outdoor (with proper precautions)
Product Usage Instructions
- Before using the product, carefully inspect it for any signs of damage such as cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire. Discard any damaged products.
- If using the product outdoors, ensure it is suitable for outdoor use and connect it to a Ground Fault Circuit Interrupting (GFCI) outlet. If no GFCI outlet is available, consult a qualified electrician for proper installation.
- When not in use, store the product neatly in a cool, dry location protected from sunlight.
- If using the product on a live tree, ensure the tree is well-maintained and fresh. Do not place the lights on trees with brown needles or easily breakable needles. Keep the tree holder filled with water.
- If placing the lights on a tree, make sure the tree is well secured and stable.
- To replace a lamp, follow these steps:
- Grasp the plug and remove it from the receptacle or outlet device. Do not unplug by pulling on the cord.
- Pull the lamp and plastic base straight out of the lamp holder.
- Replace the lamp with only a 3.3 Volt, 0.066 Watt, LED type lamp (provided with the product).
- Do not overload the lighting string. The maximum rating is 19.2 Watts (0.16 Amps).
- If connecting multiple sets of lights end-to-end, follow these steps:
- Choose one set as the master set and connect it to a plug.
- Unscrew the coaxial connector between the light sets on all sets you want to connect to the master set.
- Connect each set of lights end-to-end using the coaxial connections, screwing each connection cap tightly.
- Note: You can only add two additional sets to your master set for a total of three connected sets.
IMPORTANT SAFETY INSTRUCTIONS
When using electric products, basic precautions should always be followed
including the following:
READ & FOLLOW ALL SAFETY INSTRUCTIONS
- This is an electric product a toy! To avoid the risk of fire, burns, personal injury, and electric shock, it should not be paved with or placed where small children can reach it.
- Do not use seasonal products outdoors unless marked as suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- Do not use this product for other than its intended use.
- This seasonal use product is not intended for permanent use or installation.
- Unplug when leaving the house, when retiring for the night, or if left unattended.
- Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place it on sharp hooks or nails.
- Do not hang ornaments or other objects from cord, wire, or light string.
- Do not place lighting string on carpeting, drapes, or furniture, or allow it to contact vinyl siding while the power is on.
- Do not perform any maintenance or troubleshooting for bad or broken lamps while the power is on.
- Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
- Do not cover the product with cloth, paper, or any material not part of the product when in use.
- This product is equipped with non-shunted type LED lamps. Do not twist or attempt to remove lamps.
- Do not let lamps rest on the supply cord or on any wire.
- Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
- Before using or reusing, inspect the product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
- Before storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
- When not in use, store neatly in a cool, dry location protected from sunlight.
- When the products are used on a live tree, the tree should be well-maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
- If the product is placed on a tree. the tree should be well-secured and stable.
USER SERVICING INSTRUCTIONS:
WARNING.?. Donoluse was only pato the over until prodded frontal. or
water outlet boxes where there is only a partial cover shall not be used for
outdoor installations. This power unit is intended to be correctly oriented in
a vertical or floor-mount position. If the connector of this lighting string
does not properly fit into the connector of the driver, do not modify the
product and discard product if the connector is damaged. SEE OTHER SIDE
NOTE: Use only this GE branded, SEASONAL-USE LED DRIVER Power Supply,
Model TS-8W29V, manufactured by Guang Zhou Ting Shen Electric Co Ltd. that was
provided with this product. DO NOT use this adapter with an other product
To replace the lamp:
- Grasp the plug and remove it from the receptacle or other outlet device. Do not unplug by pulling on the cord.
- Pull the lamp and plastic base straight out of the lamp holder.
- Replace lamp with only 3.3 Volt, 0.066 Watt, LED type lamp(provided with product).
CAUTION
Tistestingsting is ales192 Wats 0.16Amps, don related GE microbright light
set come pre-attached to a plug. For end-to-end connections up to three (3)
sets, you will need only one plug. To begin, choose one (1) set as your master
set. This set would be the only set connected to a plug. Next, unscrew the
coaxial connector between the light set on all of the sets you would connect
to your master set. Lastly, connect each set of lights end-to-end using the
coaxial connections. screwing each connection cap tightly.
Note: you may only add two (2) additional sets to your master set for a total of three (3) connected sets.
- To reduce the risk of fire electric shock: a) Do not install on trees having needles, leaves or branch coverings of metal or materials that look like metal, and b)Do not mount or support strings in a manner that can cut or damage wire insulation.
- To reduce the risk of overheating, a) replace burned-out lamps promptly. Use 3.3 Volt, 0.066Watt LED lamps provided with this product .b) Risk of fire. This product does not contain lamp shunts in order to allow the product to operate if one lamp burns out. Do not replace lamps with other than the spare lamps provided with this product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
For questions and/or assistance, call customer service at 1-877-398-7337 or visit us on the web at www.GEholidaylighting.com
- FOR INDOOR AND OUTDOOR USE MADE IN CHINA
- PRINTED IN CHINA HC-23
- Nicolas Holiday Ltd., 246 Spring Hill Road, Unit B, Trumbull CT 06611
- ©2023 Nicolas Holiday Ltd., Suite 2706 Skyline Tower,39 Wang Kwong Road, Kowloon Bay,Kowloon, Hong Kong
- All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>