SAUTVS ZP-YJ-031010-001 XXL Fender Flares for Kawasaki Teryx KRX 1000 Installation Guide

SAUTVS ZP-YJ-031010-001 XXL Fender Flares for Kawasaki Teryx KRX 1000

Product Information

Specifications:

• Product Name: Fender Flares Kit For Kawasaki Teryx KRX 1000
• Model Number: ZP-YJ-031010-001

Product Usage Instructions

Before You Begin:
Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation instructions for future reference.

Important:
This FENDER FLARES KIT is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris.

Installation Instructions – Front Fender Flare:

1. Shift vehicle transmission into PARK. Turn key to OFF position and remove from vehicle.
2. Firstly, use the screws to assemble the split fender flares.
3. Remove the mounting screws of the original fender flares and install the widened fender flares directly on the original fender flares.
   • P1: Fixing holes use the original vehicle’s nylon expansion screws
   • P2-P5: Fixing holes use the screws and nuts (M6 * 30) provided with the product
   • P6-P8: Fixing holes use the self-tapping screws in this product kit
4. Installation completed.

Installation Instructions – Rear Fender Flare:

1. Firstly, use the screws to assemble the split fender flares.
2. Remove the mounting screws of the original fender flares and install the widened fender flares directly on the original fender flares.
   • P1-P4: Fixing holes need to use a 6MM drill bit to punch out the fixing holes before using the screws for installation.
   • P5-P9: Fixing holes can be fixed directly using the screws in the product kit.
3. Installation completed.

FAQ

• Can this Fender Flares Kit fit other models of Kawasaki Teryx?
  This Fender Flares Kit is exclusively designed for Kawasaki Teryx KRX 1000. It may not fit other models of Kawasaki Teryx.

• Are additional tools required for installing this kit?
  The kit comes with all the necessary screws and nuts for installation. However, you may need a 6MM drill bit for specific fixing holes as mentioned in the instructions.

BEFORE YOU BEGIN

Read these instructions and check to be sure all parts and tools are accounted. Please retain these installation instructions for future reference .
IMPORTANT This FENDER FLARES KIT is exclusively designed for your vehicle. Please read the installation instructions thoroughly before beginning. Installation is easier if the vehicle is clean and free of debris.

INSTALLATION INSTRUCTIONS

Shift vehicle transmission into “PARK”. Turn key to “OFF” position and remove from vehicle.

FRONT FENDER FLARE

1. Firstly, use the screws to assemble the split fender flares.

2. Remove the mounting screws of the original fender flares and install the wide ned fender flares directly on the original fender flares. (The other side can be installed in the same way)
   Notes:

   • P1: Fixing holes using the original vehicle ‘nylon expansion screws
   • P2-P5: Fixing holes use the screw sandnuts(M6 * 30) provided with the product
   • P6-P8: Fixing holes using the self-tapping screws in this product kit

3. Installation completed.

REAR FENDERFLARE

1. Firstly, use the screws to assemble the split fender flares

2. Remove the mounting screws of the original fender flares and install the widened fender flares directly on the original fender flares. (The other side can be installed in the same way)
   Notes: P1-P4: Fixing holes need to usea6MMdrill bitto punch out the fixing holes before using the screws for installation. P5-P9: Fixing holes can be fixed directly using the screws in the product kit.

3. Installation completed.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>