Blaze King S.0529.T Log Set Traditional CL2714 User Manual

Blaze King S.0529.T Log Set Traditional CL2714

Product Information

The S.0529.T Log Set Traditional CL2714 (7 pc) is an optional log set designed to be used with a heating appliance. It contains seven different log shapes that create a realistic fire appearance.The log set is manufactured by Valley Comfort Systems Inc. andBlaze King Industries.

Important Safety Information:

• Only the log set supplied by the manufacturer should be used with this appliance.
• The log set must be installed as described in the manual.
• Dangerous operating conditions may occur if the logs are notpositioned in their approved locations.
• If any logs are broken, do not operate the unit until they arereplaced.
• California Proposition 65 warning: This part can expose you to chemicals including benzene, which is known to the State of California to cause cancer and birth defects or other reproductiveharm. For more information, visit www.P65Warnings.ca.gov.

Product Usage Instructions

1. Make sure that the log pieces sit behind and in front of the burner. Ensure that the logs do not interfere with the burner or pilot flame. Place the large #1 log at the back of the firebox,tight against the back wall flange.
2. Place #2 ember base flush with the firebox front edge.
3. Interlock #3 ember base with #2 ember base, keeping it flush with the firebox front edge.
4. Position #4 log on top of #3 ember base.
5. Position #5 log on top of #2 ember base.
6. Position #6 log on the positioning pin of #4 log and ledge of#1 log.
7. Position #7 log on the positioning pin of #5 log and flat ledge of #1 log.
8. Check the finished flame appearance.

Note: Refer to the provided figures for visual reference during the installation process.

If you have any further questions or concerns, please contact Valley Comfort Systems Inc. at Phone: 250-493-7444 or Blaze KingIndustries at Phone: 509-522-2730.

WARNING
ONLY THE LOG SET SUPPLIED BY THE MANUFACTURER MAY BE USED WITH THIS APPLIANCE. THE LOG SET MUST BE INSTALLED AS DESCRIBED IN THIS MANUAL. DANGEROUS OPERATING CONDITIONS MY OCCUR IF THESE LOGS ARE NOTPOSITIONED IN THEIR APPROVED LOCATIONS. IF LOGS ARE BROKEN, DO NOT OPERATE THE UNIT UNTIL THEY ARE REPLACED.

CALIFORNIA PROPOSITION 65
WARNING: This part is to be used in a heating appliance that can expose you to chemicals including benzene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more informationwww.P65Warnings.ca.gov.

1. The optional log set contains seven different log shapes. Make sure that the log pieces sit behind and in front of the burner. It is important that the logs do not interfere with the burner or pilot fl ame. Place the large #1 log at the back of the fi rebox, tightagainst the back wall flange. (Fig.1)
2. Place #2 ember base flush with fi rebox front edge. (Fig.2)
3. Interlock #3 ember base with #2 ember base, keep fl ush with firebox front edge. (Fig.3)
4. Position #4 log on top of #3 ember base. (Fig.4)
5. Position #5 log on top of #2 ember base. (Fig.5)
6. Position #6 log on positioning pin of #4 log and ledge of #1 log. (Fig.6)
7. Position #7 log on positioning pin of #5 log and fl at ledge of #1 log. (Fig.7)
8. Finished flame appearance. (Fig.8)

Manufactured By

• Valley Comfort Systems Inc.
• 1290 Commercial Way
• Penticton, BC V2A 3H5

CANADA

• Phone: 250-493-7444
• Fax: 250-493-5833

Blaze King Industries

• 146 A Street
• Walla Walla, WA 99362
• U.S.A.
• Phone: 509-522-2730
• Fax: 509-522-9803

References

• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>