Zalman P30 Micro-ATX Mini Tower Computer Case User Manual
- June 13, 2024
- ZALMAN
Table of Contents
Zalman P30 Micro-ATX Mini Tower Computer Case
Product Information
- Model: P30
- Case Form Factor: Micro-ATX Mini Tower
- Dimensions: 453(L) x 235(W) x 429(H) mm
- Weight: 8kg
- Case Materials : Plastic, Steel, Tempered Glass
- Motherboard Support: mATX/Mini-ITX
- Maximum VGA Length: 420mm
- Maximum CPU Cooler Height: 173mm
- Maximum PSU Length: 200mm
- PCI Expansion Slots: 5
- Drive Bays:
- Top: 2 x Combo (3.5” or 2.5”), 1 x Guide toolless
- Side: 1 x 2.5”
- Fan Support:
- Top: 3 x 120mm / 2 x 140mm
- Side : 2 x 120mm
- Rear: 1 x 120mm / 1 x 140mm
- Bottom: 3 x 120mm / 2 x 140mm
- Fan(s) Included:
- Top: 2 x 120mm (ARGB Fan)
- Side: 1 x 120mm (ARGB Fan)
- Heatsink Support:
- Top: 2 x 120mm / 2 x 140mm
- Side : 1 x 120mm
- Rear: 1 x 120mm / 1 x 140mm
- I/O Ports: Not specified
Product Usage Instructions
- Before installing the product, carefully read the user manual.
- Check the product and its components for any abnormalities before installation. If any issues are found, contact the location where you purchased the product for a replacement or refund.
- Wear gloves during installation to prevent accidents.
- Avoid applying excessive force when mounting the system to prevent severe damage.
- Always refer to the manual when connecting cables to prevent short circuits and potential fires.
- Ensure that the ventilation holes of the product are not blocked during use to prevent overheating.
- Avoid exposing the product to direct sunlight, water, moisture, oil, or excessive dust. Store and use the product in a well-ventilated area.
- Do not use chemical cleaners, such as alcohol or acetone, to clean the surface of the product.
- Avoid inserting your hand or other objects into the product during its operation to prevent injury or damage.
- Store and use the product out of children’s reach.
- Use the product only for its designated purposes and follow the instructions provided. Our company assumes no responsibility for any problems that occur due to misuse or customer carelessness.
Precautions
- Read this manual carefully before installing.
- Check the product and components before installing. If you find any abnormalities, contact the location where you purchased the product for a replacement or refund.
- Wear gloves to prevent accidents when installing the product.
- Do not apply excessive force, as severe damage may occur when mounting the system.
- Always refer to the manual when connecting cables, as incorrect installation may cause a short-circuit and result in a fire.
- Be careful not to block the ventilation holes of the product when using the system to avoid overheating.
- Avoid areas with direct sunlight, water, moisture, oil, an excessive dust. Store and use the product in a well-ventilated area.
- Do not use chemical cleaners, such as organic solvents like alcohol or acetone, to clean the product’s surface.
- Do not insert your hand or other objects into the product during its operation, as this may injure your hand or damage the object
- Store and use the product out of children’s reach.
- Our company assumes no responsibility for any problems that occur due to the use of the product for purposes other than its designated purposes and/or the carelessness of the customer.
- The exterior design and specifications of the product are subject to change without prior notice to consumers for quality improvement.
DIMENSION
Accessories component
I/O Ports
Accessories component
- Removing the side / front panels
- Removing the top/bottom dust filter
- **Motherboard installation
Motherboard size
**
-
PCI-E(VGA) card installation
-
2.5’’ SSD installation
-
2.5’’ and 3.5’’ SSD / HDD installation
-
PSU installation
-
Radiator installation
- Installing the top radiator・120mm / 140mm/ 240mm /280mm / 360mm
- Installing the rear radiator ・120mm / 140mm
-
Fan installation
-
Installing the top fans ・3 x 120mm, 2 x 140mm
-
Installing the side fans ・2 x 120mm
-
Installing the rear / bottom fans ・1 x 120mm, 1 x 140mm / 3 x 120mm, 2 x 140mm
-
-
Fan(s) Included / Fan Specifications
-
I/O Connectors
This mark, designed by Zalman, indicates product compliance with the European Union’s RoHS (Restriction of Hazardous Substances) Directive.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the European Union and other European countries with
separate collection systems)
QR SCAN
References
Read User Manual Online (PDF format)
Loading......