RiteSensor TPMS Sensor for Bluetooth TPMS User Guide
- June 13, 2024
- RiteSensor
Table of Contents
TPMS Sensor for Bluetooth
TPMS User Guidec
Product Information
Compliance Notice
The RITE-SENSOR® complies with UKCA and CE regulations.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired function.
Warning : Any changes or modifications in construction of this device
which are not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Contents
The RITE-SENSOR ® comes assembled with a rubber or clamp-in valve stem and
anti-rotational pin.
Warranty
The warranty period of any RITE-SENSOR ® is 24 months from the date of
purchase of after a demonstrated use of 40.000km, whatever occurs first. Any
warranty claims must be presented to Bartec Auto ID within 30 days of the
defect being detected.
Caution
Any maintenance and repair work must be carried out by trained experts.
Failure to do so may result in the failure of the TPMS faulty or incorrect
installation of the product. Read the installation and safety instructions
carefully before installing the sensor. When the tyre bead is initially
broken, ensure the valve is on the opposite side of the wheel from the bead
breaker blade. When a tyre is removed or a sensor is serviced it is highly
recommended to replace or service the sensor. A clamp-in sensor is properly
serviced by replacing the valve nut / collar / core, rubber grommet and if
necessary, the valve stem. It is very important to tighten the nut/collar to
the correct torque of 5.0Nm (n/a for rubber).
RITE-SENSOR ® with Rubber Valve
RITE-SENSOR® with Aluminium Valve
INSTALLATION GUIDE
-
Check functionality of sensor and program before mounting.
-
Use assembly compound for rubber valve. Do not coat sensor!
Tighten clamp-in valve to a torque of 5.0Nm -
Ensure that the sensor is not in direct contact with the rim well
-
Mount the tire to the wheel
-
Inflate tire to recommended pressure
RITE-SENSORS with rubber valves have a maximum permitted speed of 210 km/h
RITE-SENSORS with metal valves have a maximum permitted speed of 330 km/h
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>