PATURA 130.6137 COMPACT Trough Drinker Instruction Manual
- June 13, 2024
- patura
Table of Contents
- PATURA 130.6137 COMPACT Trough Drinker
- Product Information
- Product Usage Instructions
- Fixation of Drinking Bowl
- Adjustment of water level
- Cleaning
- Dimensions
- Fixation on walls
- Mounting of circuit pipe
- Adjustment of water level
- Water connection
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PATURA 130.6137 COMPACT Trough Drinker
Product Information
The EN COMPACT Trough Drinker 45 cm is a high-quality product made in Germany.
It is designed for use with cattle, dairy cows, calves, and horses. This
trough drinker is ideal for animals with nose rings or anti-suction rings. The
water pressure required for proper operation ranges from 1 to 5 bar or 14.5 to
73 psi.
The trough drinker has a maximum capacity of approximately 20 liters and is
designed for wall mounting. It comes with mounting instructions in multiple
languages, including Deutsch and English. The product also features a water
connection with an IG (Internal Thread) union piece for easy installation.
Product Usage Instructions
- Installation Height: The recommended installation height for the trough drinker is between 70 and 80 cm (28 – 32 inches) from the ground to the edge of the trough.
- Water Circuit Mounting: Follow the provided scheme to mount the water circuit pipe (132.1599). Install the valve (131.0674) and ensure all parts are tightened securely.
- Water Pressure: The recommended water pressure for the trough drinker is between 1 and 5 bar (14.5 – 73 psi). The water flow rate can reach up to approximately 40 l/min at 5 bar.
- Flush Water Line: Before connecting the COMPACT Trough Drinker, it is important to flush the water line well to remove any debris or impurities.
- Water Filter Installation: Install a water filter (101.0487) before connecting the COMPACT Trough Drinker to ensure clean water supply.
- Adjustment of Water Level: The water level in the bowl can be adjusted by changing the height of the float valve.
- Use in Winter Season: The water circuit pipe (132.1599) can be connected to a Heating Unit for frost-protected use throughout the year. Please refer to the heating unit instructions for proper installation.
- Bite Protection: The trough drinker includes a bite-protection feature to prevent damage from animals.
- Insulation: The trough drinker is insulated to help maintain water temperature.
COMPACT Trough Drinker 45 cm for cattle, dairy cows, calves, horses ideal for animals with nose rings or anti-suction ring water pressure from 1 – 5 bar / 14,5 – 73 psi
Fixation of Drinking Bowl
- COMPACT Trough Drinker can be fixed on walls or on tubes of 1½” – 2″. 4 Fixing brackets (131.0169) are necessary for installation on tubes (1½” – 2″). 4 strong screws are necessary for installation on walls of wood or concrete.
- Observe DIN 1988 / DIN EN 1717!
- Hole Distance: 500 mm
- Installation height 70 – 80 cm (28″ – 32″) until edge of trough.
Water Circuit Mounting
- Mount the water circuit pipe (132.1599) according to the scheme on the left.
- Mount the valve (131.0674) and tighten all the parts well!
Attention!
- Flush water line well before you connect the COMPACT Trough Drinker!
- Water Filter (101.0487) should be installed before the COMPACT Trough Drinker.
- Water pressure Water pressure from 1 – 4 bar / 14,5 – 74 psi Water flow approx. 40 l/min at given 5 bar Trough contents max. approx. 20 l / 5,3 gal
- Water connection is possible from behind. Water connection can also be done from the top or bottom means of a ¾” connection angle.
Adjustment of water level
Water level in the bowl can be adjusted by changing the height of float valve:
- unscrew two hexagon screws (132.0529)
- move the valve cover (132.1598). Take off the valve cover (132.1598)
- loose two hexagon nuts (102.0621)
- adjust the floater at desired height
- tighten two hexagon nuts again
- mount the cover (132.1598).
Cleaning
- stop water flow
- remove drainage plug (132.1563)
- let water bleed
- clean the bowl
- insert drainage plug (132.1563)
- open water flow.
Use in winter season
- Water circuit pipe (132.1599) can be connected to a Heating Unit.
- This guarantees a frostprotected use throughout the year. See heating unit instructions.
Dimensions
Fixation on walls
Mounting of circuit pipe
Adjustment of water level
Water connection
05/2021 · Technische Änderungen vorbehalten · Technical data can be changed without prior notice · Des changements techniques reservés · 104.8183
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>