patura 310030 Hoof Care Crush Profi E User Guide
- June 13, 2024
- patura
Table of Contents
patura 310030 Hoof Care Crush Profi E User Guide
Additionally required tools for assembly:
- Wrench set
- Cable drum
Mounting with one person in approx. 30 min
Mounting Instructions
Included in delivery:
| Qty| Description
---|---|---
1| 1x| Hoof Care Crush Profi E
2| 2x| Front foot rest
3| 1x| Belly strap
4| 1x| Hook rear foot winch
Dimensions
Internal dimensions: Length 190 cm, Width 82 cm, Height 180 cm
External dimensions: Length 200 cm, Width 150 cm, Height 240 cm
Weight: 620 kg
Technical details:
- 2 electric motors for front foot winches
- 2 electric motors for belly strap
- 1 electric motor for rear foot winch
- 1 electric motor for backstop/push bar
- 230 V power supply
- 1600 W per electric motor
- 1500 kg lifting force each motor
- 2 power outlets, 1 LED lighting
- Completely hot-dipped galvanised
- Automatic headbail unit
- 20 mm thick rubber mat – less noise, non-slip
- Emergency stop switch for each winch
- The hoof care crush has a swivel arm. That arm can be rotated around the crush
- To open the backstop / push bar, the swivel arm has to be rotated out of the opening area of the backstop/push bar
- Equipment of the swivel arm:
- 2 power outlets
- 1 tool holder
- 1 LED lighting
- For a safe standing position, the hoof care crush should be fixed on a concrete floor
Before using:
- Front foot rests 2 are reversed for transport
- Fit them on the opposite sides (use the 19 mm wrench)
- They must show to the outside
- Connect the hoof care crush 1 to 230 V power supply
- To lower the front foot winches on both sides, press the button [↓]
- To lower the belly strap 3 , press the button [↓]
- Prepare the hook for rear foot treatment 4 (supplied loose)
Mounting Instructions
Operating buttons
Capture of the animal
Headgate only for capturing hornless cattle!
- Wings of the headgate must be directed to the inside to enable the automatic function. The animal presses the doors with is shoulders and closes the gate in this way.
- If desired, adjust the neck width using bolts and levers.
- Neck width from 10 to 28 cm in 5 steps
- Operating of the headgate from left or right side
- After fixing the animal in the headgate, lower the backstop / push bar to additionally fix the animal.
- Press the button [↑] to move the belly strap 3 upwards, until the belt will touch the belly loosely
Hoof care treatment
Front feet:
- Place the strap around the foot, press button [↑] to move the foot upwards and place it on the foot rest 2 .
- Place the swivel arm in the correct position, turn the light on, connect your tools.
- After finishing: press the button [↓] and release the strap
Rear feet:
- Insert the rope between the straight and bent bar.
- Place the hook 4 above the ankle joint and attach it to the hook of the rope.
- Press the button [↑] and lift the hind leg – the leg slides automatically into th
Release of the animal
- Lower the belly strap 3 .
- Push the lever of the headgate upwards – Now the animal can open the doors on its own.
- If there are some problems for the animals to open the wings, use the lever on the side.
- After that, the headgate automatically goes back in the catch position.
Other applications
- All side doors can also be opened for vaccinations or other treatments.
- The central crossbar can be removed for better access to the animal.
Mounting Instructions
Advantages:
-
Backstop and rear foot winch
-
Automatic headbail unit
-
Power outlet and LED lighting
-
20 mm thick rubber mat
-
Comfortable hoof care thanks to electric winches
-
Free access to the animal
PATURA KG • Germany Tel. 00 49 93 72 94 74 – 0
www.patura.com
Mainblick 1 • 63925 Laudenbach Fax 00 49 93 72 94 74 – 29
info@patura.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>