FISHBONE FB21301 Universal Truck Bed Universal In Bed Tire Carrier Instruction Manual

: June 13, 2024
: FISHBONE

Table of Contents

FISHBONE FB21301 Universal Truck Bed Universal In Bed Tire Carrier
Product Information
Product Usage Instructions
INSTALLATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FISHBONE FB21301 Universal Truck Bed Universal In Bed Tire Carrier

FISHBONE-FB21301-Universal-Truck-Bed-Universal-In-Bed-Tire-Carrier-
product

Product Information

Product Name: FB21301 Universal Truck Bed Universal In-Bed Tire Carrier

Required Tools:

19MM Socket/Wrench
Drill
.5 Drill Bit
Drill Stop
Marker

Kit Contains:

Carrier Bin (1)
Ratchet Strap (2)
Carriage Bolt (4)
Hex Nut (4)
Oversized Washer (4)
Thread Locker

Product Usage Instructions

Plan the Installation

Place the carrier into the bed of your vehicle as desired.
Take note and special care to ensure that during theinstallation process, damage to vital components won’t occur below the bed, and that the locations underneath have enough clearancefor the 4 bed washers.
Place your tire onto the mount and ensure it will restwithout any complications.

Drill

Begin drilling the bed with a drill stop starting with apilot and working your way up to a .5in bit.

Install

Begin securing the carrier to the bed using the 4 carriagebolts, bed washers, and hex nuts with a 19mm socket/wrench.
With a marker, mark the bolt holes to help identify the drilllocations.
Place your tire onto the carrier and secure it with theincluded ratchet straps by hooking it into the triangle-shapedholes located on the front and back of the bin.

Again, ensure that drilling below these points won’t damage vital components*

REQUIRED TOOLS/KIT CONTAINS/QTY

19MM Socket/Wrench: Carrier Bin 1
Drill: Ratchet Strap 2
.5” Drill Bit: Carriage Bolt 4
Drill Stop: Hex Nut 4
Paint: Oversized Washer 4
Thread Locker
Marker

INSTALLATION

PLAN THE INSTALLATION

Place the carrier into the bed of your vehicle as desired.
Take note and special care to ensure that during the installation process, damage to vital components won’t occur below the bed, and that the locations underneath have enough clearance for the 4 bed washers.

Place your tire onto the mount and ensure it will rest without any complications.

With a marker, mark the bolt holes to help identify the drill locations.
With a marker, mark the bolt holes to help identify the drill locations.

DRILL

Begin drilling the bed with a drill stop starting with a pilot and working your way up to a .5in bit.

INSTALL
Begin securing the carrier to the bed using the 4 carriage bolts, bed washers, and hex nuts with a 19mm socket/wrench.

Place your tire onto the carrier and secure it with the included ratchet straps by hooking it into the triangle shaped holes located on the front and backof the bin.