APECEL APL-F001 Multifunctional Clip User Manual
- October 30, 2023
- APECEL
Table of Contents
APL-F001
User Manual
APL-F001 Multifunctional Clip
Dear customer,
Thank you for purchasing our product. Please read the following instructions
carefully before first use and keep this user manual for future reference. Pay
particular attention to the safety instructions. If you have any questions or
comments about the device, please contact the customer line.
✉ www.alza.co.uk/kontakt
✆ +44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7,
www.alza.cz
This
phone clip is suitable for most type of smartphone photography on the market.
Multifunctional Clip Operating Instructions
Mobile Phone clip installation
Gently attach the stretch clip to your phone, making sure the hole in the
middle of the clip just fits the phone’s main lens.
Mount the telescope to the phone clip
Screw the telescope connector clockwise into the 17mm threaded hole of the
clip.
Insert the telescope into the connector.
Mount the phone lens to the phone clip
Gently attach the stretch clip to your phone, making sure the hole in the
middle of the clip is aligned with the phone’s main lens. 
Screw the phone lens clockwise into the 17mm threaded hole of the clip.
Other Introduction
Clampable Size:
Smallest Size
Biggest Size
Pay attention to the installation direction of the clip
If your clip is installed in the wrong direction, the 17mm threaded hole will
not be aligned with the main camera. Please reverse the direction of the clip
before installing.
Included EVA gasket
If your mobile phone camera is protruding, please choose the appropriate
thickness of EVA spacer and stick it on the clip The inner side (the spacer
has three thickness of 2mm, 3mm, 4mm) so that your phone camera can be flush
with the clip.
The Purpose of Each Port of the Clip
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2
years. If you need repair or other services during the warranty period,
contact the product seller
directly, you must provide the original proof of purchase with the date of
purchase.
The following are considered to be a conflict with the warranty conditions,
for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
References
- Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
- alza.at
- Alza | Alza.co.uk
- alza.de
- alza.hu
- alza.sk