Brookstone 647156 Towel Warmer Instruction Manual

Luxurious warmth for toweLs, robes and bLankets
Towel Warmer

FCC STATMENT:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications . However, there is no guarantee that interference will not occur in a particular installation .
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna .
• Increase the separation between the equipment and receiver .
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
• Consult the dealer or an experienced radio/TV technician for help .
• This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation .

IMPORTANT SAFEGUARDS

When using this electrical appliance, basic safety precautions should always be followed, including the following:

1. Read all instructions .
2. Do not immerse in water, otherwise it may cause the risk of electric shock.
3. Caution—hot, do not touch metal surfaces.

CAUTION

• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
  THERE ARE NO SERVICEABLE PARTS INSIDE .

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE .

The lightning flash with arrow-head symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the unit’s enclosure that may be of sufficient magnitude to constitute a risk  of electric shock .
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit .

Important safety Instructions
All of the safety and operating instructions should be read, adhered to and followed before the unit is operated.

DANGER NOTE: As with most electrical appliances, electrical parts in this unit are electrically live even when the switch is off. To reduce the risk of electric shock, burns, fire or injury:

1. Always unplug the unit from the electrical outlet immediately after using.
2. Do not use this appliance for anything other than its intended use.
3. Do not place or store the unit where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid. 5. Do not reach for a unit that has fallen into water. Unplug it immediately. 6. Care should be taken so that objects do not fall into and liquids are not spilled onto the unit.

WARNING

1. This unit should never be left unattended when plugged in.
2. Close supervision is necessary when this unit is used near children or disabled persons.
3. Use this unit only for its intended use as described in this manual.
4. Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged or dropped in water.
5. Keep cords away from heated surfaces. Do not wrap the cord around the exterior of the appliance or let the cord hang over table or counter edge.
6. Do not use outdoors.
7. Do not alter the safety plug or use an extension cord with this device.
8. Do not operate with a voltage converter .
9. Do not touch hot surfaces .
10. Do not use accessory attachments not recommended by the manufacturer as this may cause injuries .

POWER CORD INSTRUCTION
POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it  still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY

LOCATION OF CONTROLS

1. HEATING LIGHT
2. ON/OFF
3.  HOT SURFACE CAUTION LIGHT
   

PREPARING TOWEL WARMER FOR USE

1. Open the cover and remove any contents.
2. Place the Towel Warmer on a dry, level, hard surface.
3. Insert the Ground Fault Safety Plug into a standard 120V AC outlet.
4. Press the red reset button on the Ground Fault Safety Plug.
   This is located on the plug at the end of the power cord.

TOWEL WARMER OPERATION

SELECTING AND WARMING A TOWEL

Your Towel Warmer will warm two bath sheets measuring approximately 40″ x 70″.
For best results, use 100% cotton or cotton blend towels.

1. Insert the power cord into an electrical outlet.

2. Open the lid and place your towel inside.

3. Close the lid.

4. Press the ON/OFF button on the front of the unit. The green HEATING LIGHT will illuminate, indicating the unit is warming your towel.
   NOTE: The red HOT SURFACE CAUTION LIGHT light will eventually illuminate, indicating that the inside surfaces of the Towel Warmer are hot to the touch. Handle the Towel Warmer carefully when the red HOT SURFACE CAUTION LIGHT is illuminated.

5. The green HEATING LIGHT will go off after approximately 10 minutes, indicating that the internal heater has automatically switched off. You may use your towel at this time, or leave your towel in the warmer for up to 20 minutes  before using.

6. To turn the unit off before it is done warming, press the ON/OFF button.
   NOTE: The Towel Warmer must cool down, and the red HOT SURFACE CAUTION LIGHT must go off, for the Towel Warmer to be used to heat additional towels.

CARE AND MAINTENANCE

CLEANING

• Your appliance is maintenance-free.
• If cleaning becomes necessary, disconnect the appliance from the wall outlet and wipe with a soft, dry cloth.

STORAGE

• When not in use, unplug your appliance.
• Allow the appliance to cool and store out of reach of children in a safe, dry location.
• Handle the cord carefully to prolong life. Firmly grasp the plug when removing from the wall outlet. Do not pull the plug from the wall outlet using the cord.

TROUBLESHOOTING

My Towel Warmer
failed to turn on .| Make sure the Towel Warmer is properly plugged into a wall outlet . Be sure the Ground Fault Plug is functioning properly.
note:
To test the Ground Fault Plug for proper function, turn on the appliance connected to the plug and  press the TEST button on the plug . The appliance should immediately turn off . Pressing the RESET
button will restore power to the appliance or circuit .
My Towel Warmer
is taking too long
to warm towels .| Be sure to only use dry towels; using damp towels will greatly extend the recommended 20-minute  warming cycle.
My Towel Warmer
will not work two
times in a row .| If your Towel Warmer does not function properly after a towel warming cycle, allow the Towel  Warmer to cool down before subsequent uses, and make sure red hot surface Caution Light is off .

If you still have questions about your Towel Warmer after trying the above tips, please call Brookstone® Customer Service at 1-800-846-3000.

ONE (1) YEAR LIMITED WARRANTY

Brookstone® warrants this product against defects in materials and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”). If a defect arises and a valid  claim is received within the Warranty Period, at its option, Brookstone will either 1) repair the defect at no charge, using new or refurbished replacement parts, or 2) replace the product with a new product that is at least functionally  equivalent to the original product, or 3) provide a store credit in the amount of the purchase price of the original product.
A replacement product or part, including a user-installable part installed in accordance with instructions provided by Brookstone, assumes the remaining warranty of the original product. When a product or part is exchanged, any replacement item becomes your property and the replaced item becomes Brookstone’s property. When a store credit is given, the original product must be returned to Brookstone and becomes Brookstone’s property.
Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at 1-800-292-9819. Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt is required. All  repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary. You are responsible for delivery and the cost of delivery of the product or any parts to the authorized service center  for replacement, per our instructions.
Limits and Exclusions: Coverage under this Limited Warranty is limited to the United States of America, including the District of Columbia and the U.S. Territories of Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only to products manufactured for Brookstone that can be identified by the “Brookstone” trademark, trade name, or logo affixed to them or their packaging. The Limited Warranty does not apply to any non-Brookstone products. Manufacturers or suppliers other than Brookstone may provide their own warranties to the purchaser, but Brookstone, in so far as permitted by law, provides these products “as is .”
This warranty does not apply to: a) damage caused by failure to follow instructions relating to product’s use or the installation of components; b) damage caused by accident, abuse, misuse, fire, floods, earthquake or other external causes;  c) damage caused by service performed by anyone who is not a representative of Brookstone; d) accessories used in conjunction with a covered product; e) a product or part that has been modified to alter functionality or  capability; f) items intended to be periodically replaced by the purchaser during the normal life of the product including, without limitation, batteries or light bulbs; g) any product sold “as is” including, without limitation, floor  demonstration models and refurbished items; or h) a product that is used commercially or for a commercial purpose.
BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT  PERMITTED BY APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A  PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.
Some states disallow the exclusion or limitation of incidental or consequential damages or how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and  you may also have other rights, which vary from state to state.

647156
Merrimack, New Hampshire USA 03054 • 800-846-3000 • www.Brookstone.com
Find thousands more
great ideas online

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>