FISHBONE OFFROAD FB21351 Toyota 2 nd and 3rd Gen Tacoma Side Steps Instruction Manual
- June 13, 2024
- FISHBONE OFFROAD
Table of Contents
FISHBONE OFFROAD FB21351 Toyota 2 nd and 3rd Gen Tacoma Side Steps
REQUIRED TOOLS
- 10mm Socket
- 13mm Socket
Help of a Friend
KIT CONTAINS | QTY |
---|
Side Steps (Left/Right)
M8 Hex 30mm Bolt
M8 Hex 20mm Bolt
Rear Brackets
Forward Brackets| 1ea
24
6
4
2
INSTALLATION INSTRUCTIONS
PREPARE YOUR VEHICLE
If your vehicle has them, begin removing your factory side steps.
With a 10mm socket, remove the 6 bolts from each of your factory steps. You may need help from a friend.
ASSEMBLE THE RAILS
Begin assembling the rails with the included long and short bolts, and rounded Forward and flat Rear brackets. The rails require specific placement of the brackets and bolts. The 30mm longer bolts will always be installed on the underside of the rail, and with the short 20mm bolts being used on the side.
You can tell which rail is driver or passenger by our logo pointing toward the front of the vehicle.
Secure each bracket with a 13mm socket.
INSTALL
Loosely secure the steps to your vehicle with the remaining 12 30mm bolts in the factory step bolt points. Followed by shifting the steps around as desired. Secure them with a 13mm socket.
CUSTOMER SUPPORT
550 W. PINK LAKE RD., SUITE 2 NORTH LIMA, OHIO 44452 330.423.6446 WWW.FISHBONEOFFROAD.COM
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>