TOOLCRAFT TO-8204253 SMD LED Work Light Instruction Manual
- June 13, 2024
- Toolcraft
Table of Contents
TOOLCRAFT TO-8204253 SMD LED Work Light
Product Information
Item Number: 2734751
The Rechargeable LED Work Light provides a powerful illumination of 2500
lumens. It is designed to be portable and convenient for various work
environments. The light features a durable construction and a rechargeable
battery, ensuring long-lasting use.
Product Usage Instructions
- Disconnecting from Power Supply:
- Before starting any dismantling process, ensure that the work light is disconnected from the power supply to prevent electrical accidents.
- Dismantling Process:
- Step 1: Remove the 4 screws located on the back cover of the work light.
- Step 2: Remove the 4 screws holding the handle in place and open the handle.
- Step 3: Disconnect the wire and carefully take out the lamp head.
- Step 4: Remove the 8 screws securing the lamp cover and open it.
- Step 5: Remove the 4 screws on the LED head and open it.
- Step 6: Desolder the wire solder to detach it completely.
- Step 7: Remove the 4 screws that were hidden beneath the wire and set them aside.
- Step 8: Gently remove the PCB (printed circuit board) which is sticked with thermal paste.
- Professional Assistance:
- If you encounter any difficulties during the dismantling process or are unsure about any step, it is recommended to seek the assistance of a professional.
Rechargable LED work light, 2500 LM
Item no : 2734751
Dismantling recommendations
- Disconnect from power supply.
- Ask help from a professional if needed.
Dismantling instructions
Step 1
Remove the 4 screws and open the back cove
Step 2
Remove the 4 screws and open the handle
Step 3
Disconnect the wire and take out the lamp head.
Step 4
Remove the 8 screws and open the lamp cover.
Step 5
Remove the 4 screws and open LED head.
Step 6
Desoldering the wire solder
Step 7
Remove the 4 screws.
Step 8
Remove the PCB (PCB stick with thermal paste).
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com). All rights including
translation reserved. Reproduction by any method (e.g. photocopying,
microfilming or the capture in electronic data processing systems) requires
prior written approval from the editor. Reprinting, also in part, is
prohibited. This publication reflects the technical status at the time of
printing. Copyright by Conrad Electronic SE.
*2734751_V1_0623_hs_en 893545355 I1/O1 en