Rolgno F25 Portable Bluetooth Speaker with Phone Stand User Manual

May 15, 2024
Rolgno

Rolgno F25 Portable Bluetooth Speaker with Phone Stand

USER MANUAL

Cell Phone Stand with Bluetooth Speaker
Note: Before using the multifunctional device, please carefully read this manual and strictly follow its instructions.

Product Diagram

  1. Phone Stand
  2. Bluetooth  Speaker
  3. Battery 18650
  4. Indicator Light
  5. USB Port for USB Flash Drive
  6. Type-C for DC Input 5V Charging

User Instruction

  1. Open the package, remove the product from the box, and unfold the mobile phone support frame.
  2. To turn on the Bluetooth speaker, press and hold the POWER button for 3 seconds until the speaker indicator light flashes blue. To turn it off, simply press and hold the POWER button for 2 seconds.
  3. Wireless Connection Activate Bluetooth on your mobile phone to search for the F25 Bluetooth device and connect to it. The speaker will provide voice prompts, and the indicator light will remain blue when the connection is successtul.

Playing Music

In the process of playing music, press u Mir once to control previous song, next song and play/pause respectively. Press * once to decrease or increase volume. Additionally, the volume control button is independent of the phone’s volume, which means that when you adjust the volume on one device, it won’t affect the settings on the other device.

Answering Phone

Call To answer an incoming call, press all the button once, and press it again to hang up when the call ends. If you don’t want to answer the phone call, you can also press the button twice to reject it.

Play  Songs from a USB Flash Drive

You can directly insert a USB Flash Drive into the speaker’s USB port, and the speaker will automatically switch to play music from the USB Flash Drive.

USB-C Charging

The speaker can be charged with USB-C cable. When charging, the indicator light flash red. After finishing charging, it will flash blue. When the battery is low, it will provide a voice prompt.

Rolgno-F25-Portable-Bluetooth-Speaker-with-Phone-Stand-
\(8\)

Using the Mobile Phone Holder

  • To use the mobile phone holder, simply unfold it and your phone will be automatically supported.
  • The mobile phone support arm is adjustable both vertically and horizontally, allowing you to expand the height and adjust the angle as needed.
  • The mobile phone holder has a 360-degree horizontal rotation for easy viewing from any angle.

Rolgno-F25-Portable-Bluetooth-Speaker-with-Phone-Stand-
\(1\)

Note

  • When using the speaker for the first time, turn up the volume for optimal sound quality.
  • When you adjust the volume on one device, it won’t affect the settings on the other device.
  • With Bluetooth 5.1, your phone can connect to the speaker within a range of 10 meters.
  • You can use the speaker while it’s charging or after it has been charged. However, please note that it cannot be used to charge phones, tablets, or other electronic devices.
  • The speaker is not waterproof, so please keep it away from liquids.
  • When adjusting the phone support arm beyond 90 degrees on the opposite side of the speaker battery, do not place your phone on it, as it may fall off easily.
  • If the screw in the phone support arm becomes loose during use, you can simply use a screwdriver to tighten it.

Package Contents

  • F25 Main Unit × 1
  • USB Charging Cable × 1
  • User Manual x 1

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interterence that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interterence will not occur in a particular installation. If this equipment does cause harmful interterence to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the followina measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals