HOTO 175 Electric Wine Opener User Manual
- June 14, 2024
- HOTO
Table of Contents
Manual of HOTO Electric Wine Opener
175 Electric Wine Opener
Warning
-
Do not put this product into water or other liquids as this may cause damage to the user and the product.
-
To avoid injuries’, do not touch the spiral hook with hands or other body parts.
-
Children are not allowed to use this product.
-
Users are not allowed to disassemble the product as it can affect the warranty.
-
Do not press the product against the bottle using brute force or try to speed up the opening process. This product works best at its set speed.
-
Please do not use this product for any other purposes.
-
Do not use this product in the presence of flammable or explosive gases.
-
Misuse may cause hazard. Always disconnect the appliance from the supply if it is left unattended and before assembling, disassembling or cleaning.
-
This appliance can be used by children aged from 8 years and above if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are aged from 8 years and above and supervised. Keep the appliance and its cord out of reach of children aged less than 8 years.
-
Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
-
Children shall not play with the appliance.
-
This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments. -
Switch off the appliance and disconnect from supply before changing accessories or approaching parts that move in use.
-
Battery-operated appliances
– Four No. 5 batteries
– Press and hold the button on the back of the opener to open the battery cover, and the battery cover will be cocked. Remove the battery cover, insert four No. 5 dry cells (alkaline) according to the direction of the positive and negative poles indicated in the battery compartment, and then close the battery cover.
– non-rechargeable betteries are not to be recharged;
– different types of betteries or new and used batteries rae not to be mixed;
– betteries are to be inserted with the correct polarity;
– exhausted batteries are to be removed from the appliance and safely disposed of;
– if the appliance is to be stored unused for a long period, the batteries should be removed;
– the supply terminals are not to be short-circuited.
** All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the environment
and human health. Please contact the installer or local authorities for more
information about the location as well as terms and conditions of such
collection points.
We Shanghai HOTO Technology Co., Ltd., hereby, declares that this equipment is
in compliance with the applicable Directives and European Norms, and
amendments.
Federal Communications Commission Supplier’s
Declaration of Conformity
Product: HOTO Electric Wine Opener
Model Number(s): QWKPQ001
Brand/Trade: HOTO
We declare that the above mentioned device has been tested and found in
compliance with CFR 47 Part 15 Regulation.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note:** This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Representative of Responsible Party for SDoC
Company: Shanghai HOTO Technology Co., Ltd.
Address: Building 45, No.50 Moganshan Road, Shanghai, China
Country: China
Telephone No.: 400-021-8696
Product Overview
Read this manual carefully before use, and retain it for future reference. Thanks for using HOTO Electric Wine Opener.
- Cork release button
- Uncork button
- Battery cover
- Battery cover button
- Viewing window
- Foil cutter
How to Use
Battery Installation
- Press and hold the button on the back of the opener to unlock the battery cover. Remove the battery cover and insert four No.5 dry cells (alkaline) according to the direction of the positive and negative poles indicated in the battery compartment. Close the battery cover when finished.
Bottle Opening
- Pinch the foil cutter and pull it out. Take the cutter and place it around the mouth of the bottle and turn your fingers slightly from left to right to cut off the foil cap.
- Hold the bottle firmly in one hand and the opener in the other. Place the lower end of the opener over the mouth of the wine bottle, and try to keep the opener in vertical position aligned with the bottle.
- Press and hold the uncork button while pressing down on the opener for about 8 to 10 seconds. The opener will automatically remove the cork from the bottle. Once the cork is completely removed, the opener will automatically stop spinning, and the opener may be released from the bottle.
- Press and hold the cork release button for about 5-8 seconds, and the cork will gradually unscrew from the opener. Release the button after the cork completely releases from the opener.
Battery Replacement
- Replace the battery if it is hard to uncork or the rotative speed is slow.
Tips:
- This product is only suitable for corks with a diameter of 20 to 24mm and a height of 38mm.
- This product is only suitable for mouth bottles with an outside diameter of up to 35mm and an inside diameter of 17.5 to 23mm.
- For a fast high-quality opening experience, it is recommended to use batteries with guaranteed quality with a manufacturing day within the month.
Maintenance
- Avoid damages from accidental shocks.
- Please wipe it up after use.
- Remove the battery when it is not in use for a long time.
Troubleshooting
In the event that the opener breaks down during use, please follow the following handling methods:
Issues | Possible Causes | Solutions |
---|---|---|
The opener does not respond or ceases to work when uncorking | Batteries are | |
misplaced | Please install the batteries correctly | |
Low battery level | Please replace the four No. 5 dry cells (alkaline) |
The opener was not properly aligned with the bottle during opening. Tilted
opening.| Press the cork release button until the opener fully detaches.
Reopen the bottle after ensuring that the opener is correctly aligned with the
bottle
Opener faults| Please contact Customer Service
Takes too long to uncork| The tip of the spiral hook of the opener does not
drill into the wine cork in time| While pressing the uncork button, slightly
press down on the opener
The foil covering the mouth of the bottle is not completely removed| The blade
of the foil cutter does not clamp tightly to the mouth of the bottle| When
cutting the foil, hold the foil cutter firmly to ensure that the blade is
tightly clamped to the bottle mouth
Parallel rotation from left to right does not allow more than half a circle|
Hold the foil cutter firmly and make several parallel turns from left to right
Specifications
Model: QWKPQ001
Item Dimensions: 59.9×44.7×185.4mm (excluding the foil cutter)
Net Weight: About 250g
Rated Voltage: 6.0V ****
Rated Power: 15W
Working Temperature: 10℃~40℃
Storage Temperature: -10℃~50℃
Storage Humidity: ≤90%RH
Battery Type: AA Battery×4
Opener Material: Stainless steel, ABS
Foil Cutter Material: Stainless iron, ABS
Manufacturer: Shanghai HOTO Technology Co., Ltd.
Address: Building 45, No. 50 Moganshan Rd, Putout District, Shanghai, PRC,
200060.
DECLARATION OF CONFORMITY
EU Declaration of Conformity
We Shanghai HOTO Technology Co., Ltd.
Declare that the product:
HOTO Electric Wine Opener / QWKPQ001
References to the following harmonized standard were made:
EN 60335-1:2012 + A11:2014 + A13:2017 + A1:2019 + A14:2019 + A2:2019 +
A15:2021
EN 60335-2-14:2006 + A1:2008 + A11:2012 + A12:2016 EN 62233:2008
2014/30/EU Electromagnetic Compatibility directive References to the following
harmonized standard were made:
EN 55014-1:2021
EN 55014-2:2021
2011/65/EU+ (EU) 2015/863 Restrictions of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Authorised signatory and technical file holder:
Shanghai HOTO Technology Co., Ltd.
Building 45, No.50 Moganshan Road, Shanghai, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>