ONFORU CP06 Solar Fireflies Lights Instructions
- June 13, 2024
- ONFORU
Table of Contents
ONFORU CP06 Solar Fireflies Lights
Product Information
Model / Modell:
- CP06
- CP08
- CP10
Solar Light Instructions
How the solar light works:
During the day, the solar panel converts solar energy into solar power,
which is stored in the rechargeable battery. At night, the sensor turns the
light on automatically, powered by the stored energy. The duration of the
stored power depends on the location, weather conditions, and seasonal
lighting availability.
Choosing the right location: Please note that this light is designed to work when the day turns to night. If there are strong light sources nearby, the light may be very dim or not turn off completely. It is important to choose a sunny location for optimal performance.
Precautions:
- The battery charge may have dropped when you receive the product. Please charge it for a full day to optimize performance.
- The surface of the solar light must be kept clean to maintain panel efficiency.
Product Usage Instructions
- When you take out the solar light from the box, locate the OFF push button switch underneath.
- Push the switch to turn it to the OFF 1 or 2 position. (1 is Constant light mode, 2 is blink mode).
- Place the light into a sunny location where the solar panel on the base will receive sunshine.
- If the light does not turn on automatically after 6 hours of charge, please check the following:
- Ensure that the lamp is placed in a sunny location and the solar panels are facing the sun.
- Check for nearby light sources that may be triggering the light’s sensor.
FCC Warning:
HK Bright International Lighting Co., Limited Unit 616, 6/F., Kam Teem
Industrial Building, 135 Connaught Road West, Sai Wan Hong Kong
Manufacturer/Hersteller: MDH LIGHTING LTD Suite 302, 292 Strovolos Avenue,
2048 Strovolos Nicosia, Cyprus
UK Importer: MDH LIGHTING LTD 69 Aberdeen Avenue, Cambridge CB2 8DL, United
Kingdom
Made in China
Email: [email protected]
Website: www.onforuleds.com
Model: CP06 CP08 CP10
Solar Light Instructions
How the solar light works:
During the day the solar panel converts solar energy into solar power, which
is stored in the rechargeable battery. At night, the sensor turns the light on
automatically, powered by the stored energy. How long the stored power lasts
depends on its location, weather conditions and seasonal lighting
availability.
Choosing the right location:
The ideal location for your solar light is one that has direct sunshine and
where the soar panel can receive that sunshine for at least 6 hours of
sunshine each day. Shady locations will lessen the energy received and may
shorten the time that the light can remain on. The solar light should not be
placed near artificial lighting (such as streetlights), which can cause the
light to turn off. This is because the solar light is light-sensitive and will
automatically turn off if there is a strong light source present. Some
examples of strong light sources are the Sun, spotlights, streetlights,
torches and interior lights.
Precautions:
Please note that this light is designed to work when the day turns to turns to
night. lf there are strong light sources nearby then the light may be very dim
or not off completely. Although the manufacturer has charged the battery, the
battery charge will have dropped when you receive it. Please charge it for a
full day to optimize performance. The surface of the solar light must be kept
clean, if not, this will lessen the efficiency of the panel.
How to use the solar light:
When you take out the solar light from the box, Locate the OFF push button
switch underneath and push it to turn it to the “OFF 1 or 2 “position(1 is
Constant light mode , 2 is blink mode). Then put the light into a sunny
location where the solar panel on the base will get sunshine. if the light
does not turn on automatically after 6 hours’ charge, please check as below:
- Check that the lamp is placed in a sunny location and that the solar panels are facing the sun, the battery may not be full recharged when purchased.
- Ensure that there is no light source nearby that may be triggering the light’s sensor.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note:
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
HK Bright International Lighting Co., Limited
- Unit 616, 6/F., Kam Teem Industrial Building, 135 Connaught Road West, Sai Wan Hong Kong
- Manufacturer/Hersteller: MDH LIGHTING LTD
- Suite 302, 292 Strovolos Avenue, 2048 Strovolos Nicosia, Cyprus
UK Importer: MDH LIGHTING LTD
69 Aberdeen Avenue, Cambridge CB2 8DL,
United Kingdom
Made in China
[email protected]
www.onforuleds.com