ONFORU FG138 Bluetooth Mesh RGB Flood Light User Manual
- June 13, 2024
- ONFORU
Table of Contents
FG138 Bluetooth Mesh RGB Flood Light
User Manual
FG138 Bluetooth Mesh RGB Flood Light
LED FLOODLIGHT
Product Manual
MODEL: D30BL G50BL D100BL
COMPONENTS AND STRUCTURE
SPECIFICATIONS
LED FLOODLIGHT
Model| D3OBL| G5OBL| D100BL
Input Voltage| 100-120V – 60Hz
Input Current| 0.31A| 0.6A| 1.1A
Rated Power| 25W| 50W| 90W
Luminous Flux| 20001m| 40001m| 80001m
CCT| 2700-6500K
CRI| a80
Color| RGB
Power Factor| a0.5
L70850 lifetime| 30000hours L70B500 25°
Beam Angle| 120°
ta| -20-40°C/-4°F-104’F
Luminaire Location| SUITABLE FOR WET LOCATIONS
DIMENSIONS
Model| D3OBL| G5OBL| D100BL
Dimensions ( LxWxH)| 258x168x40mm / 10.15×6.61×1.57in| 230x138x35mm /
9.06inx5.47×1.38in| 329x208x35mm/
12.95×8.18×1.377in
Weight| 0.5KG/1.1lb| 0.65KG/1.43Ib| 1.47kg/3.24Ib
Max Projected Area| 0.0189m2/0.2034tt2| 0.0243m2/0.262ft2| 0.0616m2/0.663ft2
Max. Lighting Coverage| 50m2/538tt2| 80m2/961tt2| 160m2/1722ft2
Note:
The intended purpose of this special purpose product: This light is used to
create atmosphere. it is not suitable for household room illumination, the
light source is not intended for use in other applications.|
PAIRING LED LIGHT WITH “Onforu” APP
NOTE:
Turn ON/OFF the Smart LED Light three times until the LED Light starts to flash
quickly, which indicates the success of the factory reset.
Step 1: “Onforu Home” App Download.
There are 2 options for obtaining and downloading the “Onforu Home” App on
your smart device.
- Scan the QR code on the right.
- Search for “Onforu Home” in the App Store or Google Play.
https://a.smart321.com/wwwyouliang
Step 2: Enter the “Onforu Home” App. and register an account and log in. If you already have an account for Onforu Home App., Please select “Log in with existing account”.
Step 3: Please turn on the Wi-Fi and Bluetooth before connecting LED
lights to the “Onforu Home” APP. Tap “+” button on top right corner to add
device, then tap “lighting device” to enter next page.
Step 4： How to pair the LED Light
- Power up the LED light.
- Quickly turn the light off and on 3 times until it flashes or breathes.
- Tap “Next” to enter the pairing step.
- Tap “+” to add the LED light.
- Tap “Next” to complete the light pairing.
- You can tap ” ” to change the device name.
- Tap “Done” to enter the control panel.
HOW TO OPERATE THE APP
PREPARATION
Check all components for damage, do not use the product if it is damaged.
Estimated Assembly Time:10-30 minutes
TOOLS REQUIRED（not included）
WARNING:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION
CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT
AND THE HAZARDS INVOLVED.
RISK OF SHOCK- BEFORE BEGINNING INSTALLATION,TURN OFF ELECTRICITY AT THE
CIRCUIT BREAKER BOX OR THE MAIN FUSE BOX.
CAUTION:
PLEASE MAKE SURE YOUR WALL SWITCH AND POWER AT MAIN CIRCUIT BREAKER BOTH ARE
OFF.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT A LICENSED ELECTRICIAN.
WARNING: INSTALLING THIS LIGHT IN AN UNGROUNDED ELECTRICAL SYSTEM MAY
CAUSE THE METAL PARTS OF THE LIGHT TO CARRY CURRENT IF ANY WIRES OR WIRE
CONNECTIONS ARE DAMAGED OR LOOSE. IN THIS CASE, ANYONE WHO TOUCHES THE LIGHT
WILL RECEIVE AN ELECTRIC SHOCK, RESULTING IN INJURY OR DEATH. BE CAREFUL NOT
TO DAMAGE OR CUT THE WIRE INSULATION (COVERING) DURING INSTALLATION. DO NOT
LET THE WIRES TOUCH ANY SHARP EDGES.
INSTALLATION STEPS
Product appearance may vary from image shown.
STEP 1:
According to the spacing (see the “A” part of the picture) of two screw bits
on the LED Light bracket, drill two mounting holes.
STEP 2:
Put the bracket onto the prepared mounting holes and then screw it on.
STEP 3:
Adjust the beam direction as you like, and then plug into the main socket.
NOTE: Recommended installation height not higher than 5 m (16.4 ft).
FCC ID:2A3W8D100BL
FCC Warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
HK Bright International Lighting Co., Limited
Unit 616, 6/F., Kam Teem Industrial Building, 135
Connaught Road West, Sai Wan Hong Kong
Manufacturer/Hers teller: MDH LIGHTING LTD
Suite 302, 292 Stroviols Avenue, 2048 Stroviols Nicosia, Cyprus
UK Importer: MDH LIGHTING LTD
69 Aberdeen Avenue, Cambridge CB2 8DL,
United Kingdom
Made in China
support@onforuled.com
www.onforuleds.com