SUMMIT CWSUITE43G 43 Inch Wide Casework Suite with Microwave Instruction Manual
- June 13, 2024
- SUMMIT
Table of Contents
SUMMIT CWSUITE43G 43 Inch Wide Casework Suite with Microwave
Product Information
- The CWH1/CWH2 Fastening Plates are designed to securely connect the cabinet and hutch into one vertical unit. By using these fastening plates, you can ensure stability and security for your new product. These plates are essential to prevent the hutch from tipping over when stacked on top of the cabinet.
- Warning: It is highly recommended to install these fastening plates to reduce the risk of tipping and ensure the safety of the user and the product.
Required Tools
- Power Drill
Included in this Kit
The kit includes all necessary fastening plates required for installation.
Product Usage Instructions
- Make sure you have all the required tools, including a power drill.
- Carefully unpack the kit and ensure all the fastening plates are included.
- Identify the cabinet and hutch that need to be connected.
- Place the cabinet and hutch in the desired position, ensuring they are aligned properly.
- Take one fastening plate and position it on the backside of the cabinet, near the top edge.
- Using the power drill, drill pilot holes through the holes provided in the fastening plate into the cabinet.
- Securely attach the fastening plate to the cabinet using suitable screws or bolts (not included).
- Repeat steps 5-7 for the remaining fastening plates, ensuring equal spacing between them.
- Once all fastening plates are securely attached to the cabinet, lift the hutch and align it with the cabinet.
- Place the hutch on top of the cabinet, making sure it rests on the fastening plates.
- Ensure the hutch is stable and securely positioned.
Following these instructions will help you properly install the CWH1/CWH2 Fastening Plates and ensure the stability and security of your cabinet and hutch unit.
Installation Instructions for CWH1/CWH2 Fastening Plates
These fastening plates can be used to connect the cabinet and hutch into one vertical unit so that the hutch does not tip over when stacked, ensuring stability and security for your new product.
WARNING: It is highly recommended to install these fastening plates to reduce the risk any tipping risk.
REQUIRED TOOLS: Power Drill
INCLUDED IN THIS KIT:
- 4 screws
- 2 fastening plates
- 1 instruction manual
- Identify and gather all parts and pieces.
- Remove the leveling legs from the hutch.
- Place the hutch on top of the cabinet.
- Place the fastening plate 4 inches from the left corner. The bottom of the fastening plate should be aligned with the top of the cabinet, and the top of the fastening plate should be aligned to the bottom of the hutch.
- Drill the supplied screws into each hole of the fastening plate to connect the cabinet and hutch.
- Repeat steps 4 and 5 for the right fastening plate and complete the assembly.
Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718-893-3900 · info@summitappliance.com
References
- Manufacturing Specialty Appliances Since 1969 | Summit® Appliance
- Manufacturing Specialty Appliances Since 1969 | Summit® Appliance
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>