INFOBIT 1601 iSwitch Video Processor Instruction Manual
- June 13, 2024
- infobit
Table of Contents
**INFOBIT 1601 iSwitch Video Processor Instruction Manual
**
Introduction
This product is a high performance 16 by 1 Multi-Viewer with seamless switcher. It supports sixteen High definition input source display on one screen. As a switcher, it can also seamlessly switch the sixteen HD input freely. The product can be controlled by various ways, through the front panel button control, IR control, RS232 control etc.
Features
- Compliant with HDMI 1.3a,HDCP 1.2;
- Supports multiplexed HDMI 16-input and 1-output;
- Supports up to 1080p High Definition resolution;
- Support 16by1 Quad Multi-viewer and seamless switch;
- Supportscaler up, scaler down function;
- Support multi outputresolution;
- Support digital audio format LPCM/AC3 /DTS
- Support button, IR Remote,RS232 etc. various controlled ways;
Package Contents
- HDMI 16×1 Multi-Viewer —————————————-——— 1PC
- 12V/5A DC power adaptor ———————-——————-———- 1PC
- RS232 Cable —————————————————— . 1PC
- Operation Manual -————-———————————————— 1PC
- Mounting ears -—-————————————————————————— 2PCS
Video Bandwidth: 2.25Gbps
Input Ports: 16 x HDMI (Female type),1x RS232;
Output Ports: 1 x HDMI (Female type),
Audio output: PCM2,5.1,7.1CH, Dolby 5.1, DTS5.1
Input Resolution| 480i60Hz,480p60Hz,576i50Hz, 576p50Hz,720p50/60Hz,
1080i50/60Hz, 1080p24/30/50/60Hz, 800×600@60,1024×768@60,
1280×720@60,1920×1080@60;
---|---
Output Resolution| 1080p,1080i,720p,1024×768, 1360×768
ESD Protection| Human Body model:
+8 kV (air-gap discharge) +4 kV (contact discharge)
Power Supply| 12V/5ADC
Dimensions| 440 mm (W)x200 mm (D)x45 mm (H)
Weight| 1800 g
Chassis Material| Metal
Silkscreen Color| Black
Operating Temperature| 0°C~40°C/32°F~104°F
Storage Temperature| -20°C~60°C/-4°F~140°F
Relative Humidity| 20~90 % RH (non-condensing)
PANEL FUNCTIONS
Front Panel
- POWER: Press this button to power the device on/off. The LED will illuminate green when the power is on, red whenitisin ‘Standby’ mode.
- LOCK: Press this button to lock all the buttons on the panel, press again to unlock. The red LED will illuminate when the button is locked, on the contrary, turn dark when unlock.
- IRreceiver window: Receive the IR from the remote controller.
- HDMI input selection button area: HDMIinputselection button 1to 16: Presstoselecttheinputfrom1to 16.
- MODE: Press the button to select display mode.
- RESOLUTION: Press the button to select the output resolution.
| NO. | RESOLUTION |
|---|---|
| 1 | 1080P, Main image audio |
| 2 | 10801, Main image audio |
| 3 | 720P, Main image audio |
| 4 | 1360×768, Main image audio |
| 5 | 1024×768, Main image audio |
**Rear Panel
**
- HDMIINPUT Are a : Connect HDMI sources. LED 1-16 illuminate when the HDMI signal plug in corresponding input port with HDMI cable.
- HDMIOUTPUT Area: Output for displays, AVR etc. LED illuminate when the display plug in corresponding output port with HDMI cable.
- PCCONTROL:RS232: Connecttoa PCor control system with D-Sub 9-pin cable for the transmission of RS-232 commands.
- IREXT:IR extender receiver port, connect with IR receiver cable.
- DCPOWERIN: Plighted 12V/5A DC power supply into the unit and connect the adaptor to an AC outlet.
Detail description of display mode
The 16×1 multi-viewer have 2 display modes.
MODE1: The 16×1 multi-viewer divides the sixteen HD input to the same
size and display on one screen. And now switch the input button on front panel
or IR remote, the HDMI output audio will Corresponding to the selected input
source.
MODE2: The 16×1 multi-viewer will separate display the sixteen HD input,
and now it is a seamless switcher.
MODE1-16X1 Multi-Viewer
| IN1 | IN2 | IN5 | IN6 |
|---|---|---|---|
| IN3 | IN4 | IN7 | IN8 |
| IN9 | IN10 | IN13 | IN14 |
| IN11 | IN12 | IN15 | IN15 |
MODE1-16X1 Seamless Switcher
PC controller user guide
Installation
The PC controller is green software. Just use a cable to connect the PCvia RS232 port and copy “Quad Multi-Viewer.exe” to PC to complete installation.
Preparation
-
Connect PC and multi-viewer by RS232 cable (headers of both sides of cable should be FEMALE)
-
Power-up multi-viewer
-
Double click “Quad Multi-Viewer.exe” icon to run it
-
Select PC connect COM port, Click to connector disconnect PC and multi-viewer.
-
Select the HDMI output resolution.
-
Selectthe inputsource.
-
Selectthe output mode, see the detail description (chapter 6).
-
Adjust the HDMI output picture quality.
-
Display or hidden the OSD menu.
-
FW upgrade part: Click to open Firmware. The click the upgrade button, the new firmware will auto download to the multi-viewer and restartit.
-
Press the Reset button, the quad multi-viewer will reset to factory state.