VIVO DESK-V123EW Electric Multi Motor Corner Desk Frame Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
Electric Multi Motor Corner Desk Frame
Instruction Manual
DESK-V123EW Electric Multi Motor Corner Desk Frame
SKU: DESK-V123EB/EW Scan the
QR code with your mobile device or follow the link for helpful videos and
specifications related to this product.
https://vivo-us.com/products/desk-v123eb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| |
---|---|---
help@vivo-us.com| www.vivo-us.com
Chat live with an agent!| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND
ELECTRIC SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS
HAVE MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
PACKAGE CONTENTS
DO NOT EXCEED WEIGHT CAPACITY
Failure to do so may result in serious injury.
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Attach Feet (A) to the underside of Motorized Legs (B) using M6x35mm Screws
(S-E) and 5mm Allen Wrench (T-A). Thread Foot Pads (R) into underside of Feet
(A).
STEP 2
Connect Outer Crossbar (E) and Inner Crossbar (F) to one Motorized Leg (B)
using M6x11mm Screws (S-B) and 5mm Allen Wrench (T-A).
STEP 3
Connect Inner Crossbar (F) and Crossbar With Plate (G) to another Motorized
Leg (B) using M6x11mm Screws (S-B) and 5mm Allen Wrench (T-A).
STEP 4
Slide crossbars from leg assemblies together. These will be secured in a later
step.
Secure Extension Connector (D) to the side of Crossbar With Plate (G) using M8x12mm Screws (S-C) and 5mm Allen Wrench (T-A).
STEP 5
Connect Outer Extension Crossbar (H) and Inner Extension Crossbar (I) to
Extension Connector (D) using M6x11mm Screws (S-B) and 5mm Allen Wrench (T-A).
Assemble Inner Crossbar (F) and Outer Crossbar (E) to remaining Motorized Leg (B) using M6x11mm Screws (S-B) and 5mm Allen Wrench (T-A).
Slide crossbars of third leg assembly onto the existing assembly to form a corner frame shape. These will be secured in a later step.
STEP 6
Adjust frame to fit desired desktop size and secure the following crossbars in
place using M6x11mm Screws (S-B) and 5mm Allen Wrench (T-A): Crossbar With
Plate (G), Outer Crossbars (E), and Outer Extension Crossbar (H).
STEP 7
Attach Side Brackets (C) to outside edge of Motorized Legs (B) using M6x11mm
Screws (S-B) and 5mm Allen Wrench (T-A).
STEP 8
Attach Anti-Vibration Pads (P) to desktop mounting holes in the side brackets
and crossbars.
Optional
If needed, use provided Tabletop Connectors (O) and M5x16mm Screws (S-A) to
secure desktop pieces together. Note: Desktop is not provided.
STEP 9
Place assembled frame upside down on the desktop. Drill 10mm deep pilot holes
using a 1/8” (3mm) drill bit, and secure using M5x16mm Screws (S-A) and a
Phillips screwdriver.
Mark screw locations for Controller (J) and Control Unit (K), making sure the
controller cable is able to reach the box, then drill 10mm deep pilot holes
using a 1/8” (3mm) drill bit. Mount Controller (J) and Control Unit (K) using
M5x16mm Screws (S-D). Tighten all screws with a Phillips screwdriver.
STEP 10
Connect cables from Controller (J) and Motorized Legs (B) to the Control Unit
(K). If needed, use Extension Cables (M, N) to connect legs. Connect Power
Cable (L) to Control Unit (K) and plug into an AC power outlet. Adjust Foot
Pads (R) to sit level if necessary. Add Cable Clips (Q) as needed.
CAUTION!
Failure to follow these instructions may result in property damage and/or
personal injury.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer
immediate assistance with rapid response times. If any parts are received
damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---
www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
help@vivo-us.com| AVG. RESPONSE TIME (within office
hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:
www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Electric Multi Motor Corner Desk Frame with Memory Controller – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>