FIELDMANN FZR 9050 Oil Pump Set User Manual
- June 13, 2024
- FIELDMANN
Table of Contents
FIELDMANN FZR 9050 Oil Pump Set
Product Information
Product Name: Oil Pump Set
Model: FZS 2505 E
Table of Contents: Available
User’s Manual: Available
Product Usage Instructions
Use
The oil pump set is designed for easy and quick oil changing or draining
fuel from various equipment such as lawn mowers, motorbikes, compressors,
boats, power generators, etc. It is not suitable for suctioning chemicals,
acids, lyes, lacquers, or paints. The operator or user is responsible for any
accidents or damages to people or property. The manufacturer is not liable for
damages caused by improper use or incorrect operation.
Safety Instructions **
**
Prior to first use, carefully read the instruction manual for your own safety and the safety of others. Keep the manual in a safe place and pass it on to any subsequent owner to ensure that the information is always available.
To avoid accidents and injuries:
- Follow all safety instructions provided in the manual.
- Do not attempt to use the oil pump set for purposes other than its intended use.
Before first using the machine, please read this instruction manual carefully,
for your own safety and for the safety of others. Keep the manual in a safe
place and pass it on to any subsequent owner to ensure that the information
contained therein is available at all times.
Caution: to avoid accidents and injuries
- Ensure that no children or animals are in the vicinity of the working area.
- Dispose of the packaging material correctly.
- Fuels and lubricants may be harmful to health. Avoid direct contact with skin and the inhalation of fuel fumes. Wash wet calluses with soap and water. We recommend the use of acid and lye resistant protective gloves.
- Before use, ensure that the device is assembled correctly, in order to avoid fluid leaks.
- Do not suck up chemicals, acids, lyes, lacquers or paints.
- Fuel and fuel fumes are flammable!
- Always observe the current fire protection ordinance and the respective state/ federal ordinances for avoiding fires.
- Do not drain fuel or oil while the engine is running or still hot.
- When filling with fuel, ensure good ventilation.
- Do not smoke whilst draining and keep away from any heat sources.
- Open the tank lid with caution, so any excess pressure can release slowly.
- When draining, ensure that no fluid is spilled. Take care when removing fluid that has leaked.
- After changing the fuel or oil, start the filled machine at a distance of at least 3 m from the filling location.
- Correct storage:
- Keep fuels and lubricants safely and out of reach of children.
- There must be no danger of any leaking fuel or fumes coming into contact with sparks or open flames. Sources of sparks may include e.g. electrical equipment.
- Use suitable and authorized containers for storing the fuel and lubricant.
- Dispose of the old materials and soaked cloths correctly (cf. “Disposal / Environmental Protection” chapter).
Scope of Delivery
Unpack the oil pump set and check for completeness.
- Catch tank, 1.6 litres
- Suction hose for oil (ø 10mm)
- Universal lock stopper
- Funnel
- Pump cylinder
- Fuel suction hose (ø 8mm) with hose adapter
The following components should be included:
- Catch tank
- Suction hose
- Lock stopper
- Pump cylinder
Function Description
The oil pump set is equipped with a manual pump cylinder. By moving the
pump handle up and down, a vacuum is generated, and the fluid can be pumped
through the suction hose into the catch tank. The universal lock stopper
allows the use of catch tanks with different openings. The oil pump set is
fitted with a manual pump cylinder. Moving the pump handle up and down causes a
vacuum to be generated and the fluid to be pumped will be pumped through the
suction hose and into the catch tank. The universal lock stopper allows the
use of catch tanks with openings of different sizes.
Initial Operation
Assembly:
- Attach the lock stopper to the catch tank.
- Screw the pump cylinder onto the brass thread of the lock stopper.
- Insert the suction hose through the lock stopper into the catch tank.
Pumping Procedure:
Ensure that the catch tank is not overfilled. Take care when removing fluid
that has leaked.
- Insert the suction hose into the open tank or engine through the dipstick hole.
- Move the pump handle up and down several times to pump the fluid into the catch tank.
Cleaning
Keep the oil pump set clean by wiping the surfaces with a soft cloth. Use a
soft cloth to wipe off any leaked oil or fuel. Dispose of soiled cloths
correctly. Do not clean or rinse the equipment with water to prevent
wastewater from entering the environment or sewage system.
- Do not clean or rinse the equipment with water. The wastewater could enter the environment or the sewage system.
Disposal / Environmental Protection
Dispose of the oil pump set, accessories, and packaging in an
environmentally friendly manner. Fuels and lubricants are water-polluting
products and should not enter the ground, water, or sewage system. Dispose of
old oil, fuel residues, and soiled cloths at a pollutant collecting point.
Contact our service center for more information. Recycle the device,
accessories and packaging in an environmentally friendly manner. Fuels and
lubricants are water-polluting products. They must therefore not enter the
ground, water or sewage system. Dispose of old oil, fuel residues and soiled
cloths in an environmentally friendly manner. Collect old oil and fuel
residues in sealed containers and take them to a pollutant collecting point.
Ask our service centre about this.
Guarantee
Product guarantee details are not provided in this user manual. Please
refer to additional documentation or contact our service center for guarantee
information.
- We guarantee this product for 12 months.
- Damages that can be traced to natural wear, overload or improper use remain excluded from the guarantee. Certain components are subject to normal wear and tear and are excluded from the guarantee.
- Damages, resulting from material or manufacturing defects will be rectified free of charge, by the provision of a replacement or by repair.
- In the event of an authorized guarantee case, we would ask you to contact our service centre by telephone. You will then be given further information on the processing of the complaint.
Warranty Certificate
To be filled in by the seller
Name:
Type:
Serial number:
To be filled in by a repair shop in case of repair.
Date of notification of the entitlement to warranty:
Day:
Month:
Year:
Date of accepting for repair:
Day:
Month:
Year:
Cause of defect:
Sales document no:
Date of purchase (putting into operation):
Day:
Month:
Year:
Seller´s stamp:
Mode of repair:
Date of returning the product back to the customer:
Day:
Month:
Year
New warranty period – extended by the duration of the repair:
Day:
Month:
Year:
Stamp of the repair shop:
Authorized service centres
Fast Plus, spol. s r. o.
Na Pántoch 18
SK 831 06 Bratislava
Slovenská republika
Tel: +421/2 /49 105 854
Fax: +421/2 /49 105 859
servis@fastplus.sk
www.fastplus.sk
Conditions of guarantee
This product is warranted for the period of 24 months from the date of
purchase to the end–user. Warranty is limited to the following conditions.
Warranty is referred only to the
customer goods using for common domestic use. The claim for service can be
applied either at dealer’s shop where the product was bought, or at below
mentioned authorized service shops. The end-user is obligated to set up a
claim immediately when the defects appeared but only till the end of warranty
period. The end-user is obligated to cooperate to certify the claiming
defects. Only completed and clean (according to hygienic standards) product
will be accepted. In case of eligible warranty claim the warranty period will
be prolonged by the period from the date of claim application till the date of
ta-king over the product by end-user, or the date the end-user is obligated to
take it over. To obtain the service under this warranty, end-user is obligated
to certify his claim with duly completed following documents: receipt,
certificate of warranty, certificate of installation…
This warranty is void especially if apply as follows:
- Defects which were put on sale.
- Wear-out or damage caused by common use.
- The product was damaged by unprofessional or wrong installation, used in contrary to the applicable instruction manual, used in contrary to legal enactment and common process of use or used for another purpose which has been de-signed for.
- The product was damaged by un-cared-for or insufficient maintenance.
- The product was damaged by dirt, accident of force majeure (natural disaster, fire, flood, …).
- Defects on functionality caused by low duality of signal, electromagnetic field interference etc.
- The product was mechanically damaged (e.g. broken button, fall…).
- Damage caused by use of unsuitable media, fillings, expendable supp-lies (batteries) or by unsuitable working condi-tions (e.g. high temperatures, high humidity, quakes,…).
- Repair, modification or other fai-lure action to the product by unauthorized per-son.
- End-user did not prove enough his right to claim (time and place of purchase).
- Data on presented documents differs from data on pro-ducts.
- Cases when the claiming product can not be indentified according to the presented do-cuments (e.g. the serial number or the warranty seal has been damaged).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>