FIELDMANN 2021-E Electric Garden Rotary Lawn Mower Instruction Manual

FIELDMANN 2021-E Electric Garden Rotary Lawn Mower Instruction Manual

INSTRUCTION MANUAL

Model: FZR 2021-E
Thank you for purchasing this garden electric rotary lawn mower.
Read this user manual carefully before using it and keep it for later.

1. GENERAL SAFETY REQUIREMENTS

IMPORTANT SAFETY WARNINGS

Unpack the product carefully and be careful not to throw anything away before all parts are found.
Keep the machine in a dry place and out of reach of children.
Read all warnings and instructions. Failure to observe warnings and instructions may result in electric shock, fire and/or serious injury.

PACKAGING

The product is protected from damage during transportation by its packaging. This packaging is made of recyclable material.

INSTRUCTION MANUAL

Before you start using the machine, read the following safety instructions and operating instructions. Familiarize yourself with the control units and how to use the device correctly. Keep the guide carefully in case you need it later. We recommend that you keep the original box, packaging, cash slip and warranty card of the product at least for the duration of the warranty. In case of transport, pack the device back in the original factory box to ensure maximum protection of the product during transport (e.g. moving or sending to a specialist service).
Note:  If you are handing the machine to another person, give the instructions as well. Compliance with the instructions of the instruction manual is the basis for the correct use of the machine. The instruction manual also contains instructions for handling, maintenance and repair.

2. INDICATIONS

• Before using the machine, read the manual with instructions.
• People in the environment should be at an appropriate distance.
• Watch out for sharp knives. The knives rotate even after turning off the engine. Before maintenance or in case of wire failure, disconnect the plug.
• Keep the power cord at an appropriate distance from the blades.
• The knives continue to rotate even after turning off the engine. Before touching any of the parts, wait for them to stop completely.
• Do ot mow grass in the rain or leave the mower in the rain under the open sky.
• Use earmuffs. Protect your eyesight.
• Ensure airway protection.
• Always disconnect the electrical cable before working on the cutting mechanism

• ---

3. DESCRIPTION (FIGURE 1)

1. Top handle
2. Switching unit
3. Power button
4. Switch lever
5. Rosehead nut
6. The lower part of the handle
7. Safety cover of the basket
8. 9. 10. 11. Handle for transportation
9. Lawn mower housing
10. Wheels
11. Collection basket
12. Cart saturation indicator

4. PRINCIPLES OF SAFE WORK

Never use the appliance if the power cord is damaged or visibly worn out.
In the event that you connect the mower to the voltage source with a damaged cable and then touch it where the insulation is damaged, you expose yourself to the risk of electric shock.
Never touch the knives until the device is unplugged from the mains and the knives do not stop rotating.
Ensure that extension cords never come into contact with knives. Knives can damage the insulation of the cable, putting you at risk of electric shock if any part of your body comes into contact with the exposed wire while it is energized.
Disconnect the machine from the power source (i.e. unplug the power cord from the AC outlet):

• If you need to leave the device unattended
• If you’re trying to troubleshoot an error
• Before every inspection, every cleaning and repair
• If you collide with a foreign object while working
• If the device shakes excessively.

Carefully study the safety rules and user manual.
Recommendation: Connect the appliance only to a voltage source equipped with a current protector (RCD) with a maximum leakage value of 30 mH.
If the power cord is damaged, it must be replaced by the manufacturer or customer service.
This device should not be handled by persons with limited physical or mental abilities (including children). Also, it should not be used by inexperienced persons, as well as by those who clearly do not have the technical knowledge necessary for treatment. Such persons may operate the device only under the supervision of an experienced person or after basic occupational safety training.
If there are children near the device, care must be taken not to play with the device. A tingling sensation in the hands or even their numbness indicates too much shaking.
In such a case, shorten the work, interrupt it with sufficiently long breaks, distribute it among several people or, if you use the lawn mower for a long time, use special anti-vibration gloves while working.
An inseparable accompaniment to working with a lawn mower is that it is noisy on the go. Therefore, noisy work should only be done during the hours reserved for this purpose or when it is customary. Be mindful of downtime periods and limit work to what is strictly necessary.
We also recommend that you, and everyone in close proximity to the cultivator, wear earmuffs.

OTHER RISKS

Although our products are manufactured to comply with applicable technical norms and safety regulations, there are still certain risks associated with handling them:

• Stones or debris may fly out of the knife compartment.
• If the operator does not use earmuffs while working, he or she may be at risk of becoming deaf.
• Finger injury during maintenance of knives
• Inhalation of particles of cut grasses
• • Risk of electric shock when touching uninsulated parts.

This device should not be used by persons with reduced physical, mental or mental abilities (including
children), inexperienced persons and those who clearly lack the technical knowledge required for the task at hand; they are only supervised by a suitable person or if they have been thoroughly informed by such a person about the principles of safe work.
If there are children near the device, care must be taken not to play with the device.
ATTENTION! Before using the mower, carefully read the instructions for use. Get to know all the controls of the device thoroughly. By observing the rules of safe work with the device, you can minimize the risk of fire, electric shock or mechanical damage.
Keep the user manual in case necessary.
Improper use of the device is dangerous for accidents. The mower can cause serious injury to its user or other people nearby, so it is necessary to constantly follow the rules of safe use to minimize this risk.
In this respect, the user is responsible for safety during use of the device. Never use the appliance even if any of the security features are missing or not working properly.

BEFORE YOU START USING THE MOWER

Please read the instructions in this guide carefully. Thoroughly familiarize yourself with the control elements of the device and the principles of correct use.
Never allow children or strangers you do not know for sure to have familiarized themselves with the control units of the device and its labor safety regulations to work independently with the lawn mower.
National legislation may lay down a minimum age above which independent use of this type of device is permitted. You should familiarise yourself with the relevant laws that govern this topic in your country.
Never use the mower when there are free-moving people, especially children or animals, nearby.
Be aware at all times that the user of the device is fully responsible for all injuries and damages related to the operation of the device.

PREPARATION FOR OPERATION

For work it is necessary to wear suitable shoes and long trousers. Never work with the lawn mower if you are barefoot or in sandals.
Before starting work, inspect the terrain and remove any objects that may be cut out of the device.
ATTENTION! Before each use of the device, make sure that the cutting knife, the pin that secures it, or the entire mower structure are not damaged or worn out. If you want to replace a damaged or worn-out part that you have more than one on your device, always replace them all at once to avoid causing an imbalance in the intervention.

HANDLING

If possible, do not mow wet grass.
Make sure you have firm support and a steady stand while working. Do not run with the mower, but walk at a normal pace.
The following general rules apply to working with a lawn mower: When mowing vegetation or a slope, go not up and down, but along the contour lines, that is, horizontally, perpendicular to the slope.
Be especially careful when changing direction on the slope. Never use the mower on too steep a slope.
If you need to pull the mower towards you while driving or if you have to drive it backwards, be especially careful.
In case you take the device elsewhere or drive it through a grass-free area, always turn off the knife drive.
Never use your device if you notice damaged covers or missing a safety unit, such as a grass ejector or grass trap.
start the engine only as described in the owner’s manual; Make sure your feet don’t come close to the knives during this operation.
When starting the engine, never tilt the device, if this is not specifically inevitable for starting.
In this case, turn the mower upwards with the side that is farther away from you.
Never stick your hands or feet under the mower, especially near moving parts. Never cover the ejector hole where grass clippings escape.
Never take the appliance while the engine is running.
Always stop the motor first and disconnect the cord from the outlet; Only then can the collection basket be corrected or emptied.

• Do the same before each inspection, cleaning and repair of the device.
• If you encounter any foreign objects while mowing the lawn, check that the mower is not damaged; If so, the damage must be repaired before starting the engine again.
• Or if the device starts shaking unusually fast (you need to check the device immediately!) Turn off the engine each time you move away from the device.

MAINTENANCE AND STORAGE

Ensure that all nuts, pins and bolts are tightened thoroughly to ensure safe operation of the device.
Check regularly if the collection basket is damaged or too worn out.
Replace worn or damaged parts with new ones immediately to help keep your device running safely.
When adjusting adjustable parts, be careful not to stick your hand between moving knives and the solid part of the device. If you want to put the mower in an enclosed space, first let the engine cool down.

5. ASSEMBLY

The lawn mower is distributed disassembled for transport purposes. Before use, it must be assembled using the following steps:

5.1 MOUNTING THE JUNCTION BOX ON THE UPPER PART OF THE HANDLE

The lawn mower is distributed disassembled for transport purposes. Before use, it must be assembled using the following steps:

• Align the switch box with the handle see Figure 2.1
• Fit the lower fuse part, see Figure 2.2
• Connect the two parts with the supplied screws and tighten them properly. Figure 2.3

5.2 ASSEMBLING THE HANDLE

• Before assembling the handle, slide the hook securing the power cord into the upper part. Figure 3.1
• Assemble the lower and upper parts of the handle using the included screws and rose-headed nuts. Fig. 3.2
• • Slide both ends of the handle into the openings on the mower body and secure it from the side with the supplied screws. Figure 3.3

Using plastic clips, attach the cable to the handle.

5.3 INSTALLING THE BASKET AND ATTACHING THE WHEEL COVERS

• Using the included screws, attach the handle to the upper part of the basket. Figure 4.1 Align the top and bottom of the basket. Figure 4.2
• To fit the basket onto the mower, you must first lift the safety cover at the back of the basket. Fig. 4.3
• • Place the mower wheel on the axle. Fig. 4.4, point 1 Then put on the washer and secure it with the eagle pin.
• Finally, put on the wheel cover. Repeat the same for all four wheels.

WARNING: The basket is equipped with a saturation indicator. Figure 4.1 Point A If the tap is open, the basket is not full. Otherwise, the basket will have to be emptied

6. OPERATION

6.1 ADJUSTING THE CUTTING HEIGHT

WARNING : Before adjusting the cutting height, always make sure that the mower is turned off and the knife is not moving.
WARNING : The knife will continue to rotate for a few seconds after turning off the mower. A rotating knife can cause injury.
The cutting height can be adjusted to 3 positions, separately on the front wheel axle and separately on the rear wheel axle.

1. Position 20 mm
2. Position 38 mm

• Adjusting the height of the front wheels – pull the wheel in the direction opposite to the basket and select the appropriate height.
• Repeat the same for both front wheels. Figure 5.1
• Adjust the height of the rear wheels – pull the wheel towards the basket and select the appropriate height.
• The height must be the same as that of the front wheels. Repeat the same for both rear wheels. Figure 5.1
• WARNING : Check that all 4 wheels have the same height

Note :  A lawn made of conventional grass mixture must be cut at a height of at least 4 cm.

Shorten the height of the lawn by no more than 1/3.

6.2 CONNECTION TO THE ELECTRICAL NETWORK

Connect the cable connector to the electrical network (230-240 V, 50 Hz). Make sure you have a cable of sufficient length.
The length of the cable should not exceed 30 meters. Using a longer cable may cause the mower to lose performance.

6.3 TURNING THE MOWER ON AND OFF

WARNING : Do not start the mower when standing on tall grass.

Power :Press and hold the security button. Fig. 6 Point A Then pull the switch lever to the handle. Figure 6 Point B Release the security button.

Power off :Release the switch lever (Figure 6, point B)

WARNING : The knife will continue to rotate for a few seconds after turning off the mower.
WARNING : Do not turn the mower on or off in quick succession.

6.4 CUTTING

WARNING : Only mow your lawn when it’s dry. Mowing wet grass can lead to unwanted clogging of the mower, as a result of which performance decreases and collecting cut grass becomes more difficult.
NOTICE : Always mow away from the cable. This avoids cutting through the cable. Chart 7

7. SPECIFICATIONS

Mode

|

FZR 2021 E

---|---

Power

|

230-240 V, 50 Hz

Power consumption

|

1200 W

Speed in neutral

|

3,400 min-1

Width of diameter (length of knife):

|

320 mm

Cutting height

|

20/38/56 mm – 3 posts

Volume of collection basket

|

30 l

Empty weight:

|

7.25 kg

Noise level

|

According to EN ISO 3744

The guaranteed acoustic power level (max. LWA) is in line with the Sound Level Directive 2000/14:

LwA MAX

|

96 dB(A)

Vibration:

|

< 30 m/s²

8. MAINTENANCE

ATTENTION! Before removing the collection basket, always turn off the mower and unplug the extension cord from the outlet.
Note : We recommend that you perform the maintenance described below regularly to extend the life of your device and increase reliability.
nspect the device regularly to detect visible defects such as free, reverse or defective knives, or defective or defective parts.
You should also regularly check that the protective covers or protective devices are not damaged and that they are in place.
Perform all necessary repairs and maintenance before each use of the device.
If the device does not work despite regular maintenance, please contact our customer service, any repair will have to be carried out in one of the workshops of our contractual partner, Fieldmann.

8.1 REPLACING THE KNIFE

We recommend that you contact a specialist service for this: Always use original spare parts.
Before inspecting the knife, always disconnect the mower from the mains and make sure that the motor is turned off.
WARNING : Remember, the knife will still spin for a few seconds even after turning off the engine.
Never try to stop the knife. Periodically check that the knife is securely fixed, its condition is good and sharp. If necessary, sharpen it again or replace it.
If the knife hits an object while mowing, turn off the mower and wait until the knife stops. Next, check the condition of the knife and the screw that secures it.
If they are damaged or lost, they must be replaced immediately. Important: Use protective gloves when working.
Winding counterclockwise, release the two screws holding the knife (with a 6 mm Allen wrench), remove the knife and replace it with a new one. Make sure that the new knife is installed in the correct direction.
Tighten the plastic nut of the mounting screw clockwise.
Turn the mower upside down
Using a screwdriver, ensure that the knife cannot rotate. Fig. 8.1 Loosen the knife bolt and replace the knife. Then tighten it again strongly. fig. 8.2

9. DESTRUCTION

INSTRUCTIONS AND INFORMATION ON PACKAGING MATERIALS USED

Dispose of used packaging materials at a waste collection point designated by the municipality.

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES

This mark on the product or in accompanying documentation indicates that used EEE should not be disposed of as household waste.
For proper disposal and reuse, drop off such products at designated collection points. In EU countries as well as other European countries, used products can be dropped off at the point of sale when buying the same new product. The product is suitable
helps preserve valuable natural resources and contributes to preventing potential negative environmental and health impacts caused by improper waste disposal. Ask for more details
at your local authority or nearest collection point. Improper destruction of this type of waste may be subject to fines in accordance with national provisions.

For businesses in European Union countries

If you wish to dispose of electrical or electronic equipment, contact the seller or distributor of the product for information. Destruction in non-EU countries. This mark is valid in the European Union. If you wish to dispose of this product, contact the seller of the product or the relevant department of your local government office for information.
This product meets the basic requirements of all applicable EU directives.

Changes to the text, design and technical characteristics are subject to prior notice, all modifications are reserved.
Instructions for use in the original language.

Specifications

• Model:  FZR 2021-E
• Power Supply:  230-240 V, 50 Hz
• Power Consumption:  1200 W
• Speed:  3,400 min-1
• Cutting Diameter:  320 mm
• Dust Bag Capacity:  30 l
• Weight:  7.25 kg
• Noise Level:  96 dB(A)

Frequently Asked Questions (FAQ)

Q: What should I do if the device overheats during operation?

A: If the device overheats, immediately turn it off and allow it to cool down before attempting to use it again.
Q: How often should I sharpen the cutting blade?
A: The cutting blade should be sharpened or replaced when you notice a decrease in cutting performance. It is recommended to sharpen it at least once a season for optimal results.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>