VIVO STAND-V200L Dual Ultrawide Vertical Monitor Desk Stand Instruction Manual
- June 13, 2024
- Vivo
Table of Contents
Dual Ultrawide Vertical Monitor Desk Stand
Instruction Manual
STAND-V200L Dual Ultrawide Vertical Monitor Desk Stand
SKU: STAND-V200L
Scan the QR code with your
mobile device or follow the link for helpful videos and specifications related
to this product. https://vivo-us.com/products/stand-v200l
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
| |
---|---|---
help@vivo-us.com| www.vivo-us.com
Chat live with an agent!| 309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
NOTE: SOME HARDWARE MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.|
---|---
ASSEMBLY STEPS
STEP 1
Install Lower Pole (D) to Base (C) using M6x16mm Screws (S-A) and 4mm Allen
Wrench (T-A). Remove protective film from Pads (H) and apply them to Base (C)
as shown. 
STEP 2
Slide Pole Cable Clip (G) and one VESA Bracket (B) onto Lower Pole (D). Adjust
the height location of VESA Bracket (B) and tighten using the 6mm Allen Wrench
(T-B). 
STEP 3
Press Pole Cap (F) into Upper Pole (E), using the side without internal
threading .
STEP 4
Screw Upper Pole (E) onto Lower Pole (D). Slide remaining Cable Clip (G) and
VESA Bracket (B) onto Upper Pole (E). Adjust the height location of VESA
Bracket (B) and tighten using the 6mm Allen Wrench (T-B). 
STEP 5
Mount VESA Plates (A) to monitors using appropriate Screws (M-A thru M-D), M8
Washers (M-E), and Spacers (M-F). 
STEP 6
Slide monitors with VESA Plates onto VESA Brackets (B) and secure using
M6x10mm Thumbscrew (S-B). 
STEP 7
Use Cable Clips (G) to route cables.
Store Allen Wrenches (T-A, T-B) in slots of Clips. 
WARNING
Always keep monitors positioned over the desktop within the arrow range
shown.
ADJUST AS DESIRED
Use 6mm Allen Wrench (T-B) to loosen or tighten Monitor Bracket (B) tension.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 03/08/2023
REV1
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
| 309-278-5303| AVG. RESOLUTION TIME
(within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
| help@vivo-us.com| AVG. RESPONSE TIME (within
office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
FOR MORE VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT:
www.vivo-us.com
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Dual Ultrawide Vertical Monitor Desk Stand – VIVO - desk solutions, screen mounting, and more
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>