BRISTAN MIO 3-4 C Mios Bath Tap Pair Instructions

June 13, 2024
BRISTAN

BRISTAN MIO 3-4 C Mios Bath Tap Pair

Product Information

Dynamic Water Pressure Min: 0.2 bar Max: 5.0 bar
Inlet Water Temperature Inlet Connections MIO 3/4 C (D1)
Outlet Connections 2.0 3.0
1.0 4.0
0 5.0
Pressure BAR Maximum Static Pressure: 10.0 bar
Pack Contents x2 Tap Bodies
3/4 BSP
Operation M24 Flow Straightener
COLD HOT
ON ON
Rubber Washers x2
x2 Plinths
Tools Required for Installation/ Maintenance x2 Metal Backnuts x2 Rubber

Washers
| 32mm Pipe Cutters| 17mm Socket Adjustable Box Spanner Spanner Spanner
| 2mm Hex Key| Crosshead Screwdriver
Prior to Installation| Spare Parts
| All products manufactured and supplied by Bristan are safe to use provided that they are installed, operated and receive regular maintenance in accordance with these instructions.
| This product needs to be installed in accordance with, and meet the requirements of The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 and The  ater Supply (Water Fittings) (Scotland) Byelaws 2014. For full Installation
Requirements & Notes (IRN) please visit www.wrasapprovals.co.uk/approvals- directory
| Isolation valves must be fitted to the inlet water supplies to ensure ease of future maintenance.
| Before installing this product the water supply must be thoroughly flushed in order to remove any swarf, solder etc. Full access must be made available for future maintenance/servicing purposes.
| This product must not be modified in any way as this will invalidate the guarantee.
| To replace any spare parts for your tap, why not scan the QR Code or visit www.bristan.com and search for your product.

Product Usage Instructions

  1. Ensure that the dynamic water pressure is within the specified range of 0.2 bar to 5.0 bar.
  2. Connect the inlet water supply to the MIO 3/4 C (D1) inlet connections.
  3. Connect the outlet connections to the desired flow rates, which can be adjusted between 2.0 and 5.0.
  4. The maximum static pressure should not exceed 10.0 bar.
  5. The pack includes two tap bodies with 3/4 BSP connections.
  6. Install the M24 flow straightener for smooth water flow.
  7. Set the desired temperature by turning the handle to the COLD or HOT position.
  8. Turn the tap ON to start the water flow.
  9. Rubber washers are provided for sealing purposes.
  10. Use the included plinths for additional support during installation.
  11. The following tools are required for installation and maintenance: two metal backnuts, two rubber washers, 32mm pipe cutters, 17mm socket adjustable box spanner, 2mm hex key, and a crosshead screwdriver.
  12. Before installation, ensure that all spare parts are available.
  13. Follow the provided instructions for safe installation, operation, and regular maintenance.
  14. Ensure compliance with The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 and The Water Supply (Water Fittings) (Scotland) Byelaws 2014.
  15. Install isolation valves on the inlet water supplies for easy future maintenance.
  16. Thoroughly flush the water supply before installing the product to remove any debris.
  17. Provide full access to the product for future maintenance and servicing purposes.
  18. Do not modify the product in any way, as it will void the guarantee.
  19. To replace any spare parts, scan the QR Code or visit www.bristan.com and search for your product.

Specifications

BRISTAN-MIO-3-4-C-Mios-Bath-Tap-Pair- \(1\)

Pack Contents

Operation

BRISTAN-MIO-3-4-C-Mios-Bath-Tap-Pair- \(3\)

Tools Required for Installation/ Maintenance

BRISTAN-MIO-3-4-C-Mios-Bath-Tap-Pair- \(4\)

Prior to Installation

All products manufactured and supplied by Bristan are safe to use provided that they are installed, operated and receive regular maintenance in accordance with these instructions. This product needs to be installed in accordance with, and meet the requirements of The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 and The Water Supply (Water Fittings) (Scotland) Byelaws 2014. For full Installation Requirements & Notes (IRN) please visit
www.wrasapprovals.co.uk/approvals-directory Isolation valves must be fitted to the inlet water supplies to ensure ease of future maintenance. Before installing this product the water supply must be thoroughly flushed in order to remove any swarf, solder etc. Full access must be made available for future maintenance/servicing purposes. This product must not be modified in any way as this will invalidate the guarantee.

Spare Parts
To replace any spare parts for your tap, why not scan the QR Code or visit www.bristan.com and search for your product.

IMPORTANT
Images shown are for illustrative purposes only. The tap you have purchased may look different to those pictured in these instructions but will follow the same installation steps. Your contents page will be specific to your product. If you find your product or any of it’s components differ from those shown on the contents page, please contact our Customer Support on – 0330 026 6273

Installation

BRISTAN-MIO-3-4-C-Mios-Bath-Tap-Pair- \(7\)

Maintenance – Valve Cleaning Replacement

PLEASE NOTE – Taps shown in these instructions are for illustration purposes only. All taps can be maintained using these instructions.

BRISTAN-MIO-3-4-C-Mios-Bath-Tap-Pair- \(8\) BRISTAN-
MIO-3-4-C-Mios-Bath-Tap-Pair- \(9\)

Maintenance – Clean/Replace Outlet

PLEASE NOTE – Taps shown in these instructions are for illustration purposes only. All Taps can be maintained using these instructions.

BRISTAN-MIO-3-4-C-Mios-Bath-Tap-Pair- \(10\) BRISTAN-MIO-3-4-C-Mios-Bath-Tap-Pair- \(11\)

Troubleshooting

BRISTAN-MIO-3-4-C-Mios-Bath-Tap-Pair- \(12\)

General Cleaning

Bristan products are made from premium materials, with hand-polished, electroplated, PVD or EPD finishes. Your taps should be regularly cleaned with warm water, a mild pH-neutral liquid soap and polished with a soft cloth. Any residues from soap, toothpaste etc. can cause blemishes if not rinsed off straight after use. Household bleaches and cleaners contain harsh chemicals and may damage the surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges, steel wool or anything similar.

Contact Us
Bristan Group Ltd.

  • UK: Bristan Group, B78 lSG.
  • EU: Masco Europe S.a.r.l. 14 Rue Strachen 6933 Mensdorf Luxembourg
  • Customer Service: +44330 026 6273
  • Web: www.bristan.com
  • Email: enquire@bristan.com

Our Guarantee
At Bristan, we want to make things as easy as possible for our customers. That’s why we offer solid guarantees on all our products, effective from the date of purchase, to give you peace of mind. To start your free guarantee simply scan the QR code and register your product. Alternatively visit wwwbristan.com/register. For any other queries, please call our Customer Service on 0330 026 6273 where our expert team of advisors will be able to offer you any help and advice. For full guarantee terms and conditions visit www.bristan.com/service- centre/guarantees.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

BRISTAN User Manuals

Related Manuals