04411 AcuraWatch 360 Bumper Cover Repairs Installation Guide

04411 AcuraWatch 360 Bumper Cover Repairs

Product Information

Specifications

• Product Name: AcuraWatchTM 360 Bumper Cover
• Manufacturer: American Honda
• Features: Radar units behind front and rear bumper covers

Product Usage Instructions

• Locating Radar Units
  To locate the radar units behind the bumper covers, refer to the Visual Index in the Service Manual. Radar units may be integrated into the emblem of the front grille assembly in some models.

• Radar Wave Emission Range Inspection
  It is crucial to inspect the Radar Wave Emission Range areas when receiving a new bumper cover. Use the provided template from the body repair manual to determine if the bumper cover can be repaired or requires replacement.

• Approved Paint Manufacturers
  When performing paint repairs on vehicles equipped with AcuraWatchTM 360, only use products from approved paint manufacturers listed in the manual.

FAQ

• Q: What should I do if damage is found within the radar wave emission range?
  A: If damage is found within the radar wave emission range, the bumper cover cannot be repaired and must be replaced. Do not attempt repairs on damaged areas within the radar wave emission range.

• Q: How do I determine if a bumper cover can be repaired?
  A: Use the provided template in the body repair manual to tape onto the bumper cover. If the damage falls within the radar wave emission range on the template, the bumper cover requires replacement.

Introduction

• Models equipped with AcuraWatch™ 360, have radar units behind front and rear bumper covers and require extra consideration when performing repairs to either bumper cover.
• In the interest of safety, nothing must disrupt the proper performance of any radar mounted behind the bumper covers. To prevent performance issues of the radar, American Honda recommends basecoat paint thickness of bumper covers not exceed 40 ųm.
• If the damage reaches the material on the front or back side of the bumper radio wave emission range, the bumper cover will need to be replaced with a recommended genuine new part and refinished according to the repair paint manufacturer’s instructions.
• Damage or partial coating within the radar wave emission range of the bumper equipped with the radar unit may interfere with its operation, so refer to the table below to determine whether to repair:

Make sure the following Repair Paint of Radar Wave Emission Range for more details.

Location Examples of Radar Wave Emission Ranges

To locate model-specific radar locations, refer to the Visual Index located in the Service Manual.

Blind Spot Information (BSI) Rear Bumper Repair Templates
The radar waves passing through the bumper covers are more affected by the type and location of the repair. Cracks or dents within the radar wave emission range cannot be repaired and will require bumper replacement.

To assist technicians in determining where the radar wave emission area is, a printable template is provided in the body repair manual. This template can be taped onto the bumper and will help determine if the bumper can be repaired or will require replacement.

Refer to the following for a printable template and more details:

• Template for Non-Repairable Zone on Bumper Cover [Blind Spot Information System]
• Precautions for Handling Bumpers [Blind Spot Information System] Page

Inspecting Delivered Bumper Covers

When inspecting a delivered new bumper cover, it is important to inspect the Radar Wave Emission Range areas. If damage to the plastic material of the bumper cover exists within the Radar Wave Emissions Range area, the bumper cover cannot be used.

NOTICE:
Do not repair bumper cover when damage is found on the radar wave emission range at receiving and return it to an authorized dealership.

Approved Paint Manufacturers

Products from the manufacturers below are approved for bumper cover paint repairs on vehicles equipped with AcuraWatch™ 360:

• PPG
• Sherwin-Williams
• Axalta Coating Systems
• BASF

Locating AcuraWatch 360 Radar Units

To provide an understanding of the possible radar locations, the below diagram may be used as a general reference when verifying if a vehicle is equipped with AcuraWatch™ 360 radar units. Radar units may be integrated into the emblem of the front grille assembly in some models.

To locate model-specific radar locations, refer to the Visual Index located in the Service Manual.

© 2024 American Honda Motor Co., Inc. – All Rights Reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>