Fresca V2 Front Load Washing Machine User Manual

Fresca V2 Front Load Washing Machine User Manual

Safety Precautions

Important Safety Symbols and Precautions. Please read this manual carefully before using this product. Please read the user manual carefully and perform all installations, maintenance and operation of this machine with caution and care. Proper operation, handling, usage and care for this product will help make the most of the functions of the product and extend the service life of the machine. We are not liable for any damages resulting from improper use.

Meanings of icons and symbols in this manual:

Risk of fire

• Do not wash or soak any clothing stained with gasoline or other flammable, explosive and toxic solvent, for the clothing aforesaid will release flammable substance that may cause fire or explosion. Wash the clothing aforesaid manually first, and ensure that all potentiallylammable liquid, solid and particle traces are removed before putting it into the washing machine. Hazardous substances include acetone, alcohol, gasoline, kerosene, certain liquid household cleanser and detergent, turpentine, wax and wax remover.
• Do not use strong acid cleanser in the washer.
• Do not put gasoline, alcohol, dry cleanser or other flammable and explosive substances into the washing machine as detergent.
• Do not overload the wall power socket or the extension cord. Overloading of power wall socket may cause fire and electric shock.
• Never use this product together with other heating equipment at the same time.

Risks associated to placement and location of product

• keep children (or pets) away from playing in the washing machine; may result in serious injury.
• Install the washing machine in a dry and ventilated room; avoid location such as bathroom or a wet room.
• Position the washing machine on a hard, flat and clean surface without any water or oil.
• Never stack washing machine on top of other washing machines or appliances.
• Washing machine must be installed with proper levelling to avoid equipment damage. Use the levelling feet to adjust and make sure product is properly leveled (e.g. in recreational vehicles, caravan and trailers).
• This appliance is not intended for use by any children, persons with physical, sensory or mental disability and by any persons with inedequate knowledge of operating an appliance such as this washer product; unless been adequately supervised or guided by a responsible person and understand the potential hazards to ensure that they can use the appliance safely.
• The appliance is not intended to be used in places that are subjected to high level of vibration that may disrupt or prevent it from operating normally.
• Re-levelling of appliances is recommended if equipment has been subjected to a high vibration condition.

Risk of Scalding

• The water supply hoses may degrade over time. Periodically check and inspect the washing machine for any potential expansion, kink, breakage, wear or tear that may result in leaks on the hoses. Replace any leaking hose promptly if there are any leaks detected.
• As hot water supply may be used on this machine in one of the washing programs, there may be risk of scalding due to hot water leakage if hoses are worn or torn. Keep children away from the product;
• In case of gas leak, ventilate the room immediately and do not touch the power plug.

Risk of Electrocution

• Please unplug the washing machine before performing maintenance, cleaning or repair. Repairs MUST only be carreid out by qualified and experienced service personnel. Repairs made by unqualified and inexperienced personel may lead to further damage to the washing machine and may result in personal injury.
• Always unplug the washing machine and turn off the water supply faucet after use.
• Never bend the power cord by force or place heavy objects on the power cord;
• Never touch the power cord with wet hand;
• Never overload a power outlet by connecting too many electrical appliances on the power outlet to avoid overloading;
• Never install the washing machine close to other electrical appliances; never place a candle or cigarette on the washing machine;
• Never approach the washing machine soaked in water, otherwise an electric shock may occur;
• Please use a dedicated approved Australian wall type AC power outlet of 220V-240V/50Hz and not less than 10A, installed by a licensed electrician;
• The specification of the power plug shall comply with the requirements of electricity load current. Use the 220V-240V AC power supply alone with reliable grounding.

Parts of the Washing machine

Common part names and positions of the mini drum washing machine.

Accessories

Complete accessories and personalized design

Installing the Washing Machine

Removing the shipping bolts
Three shipping bolts on the back of the machine must be dismantled before using the washing machine.

  Packing materials can be dangerous to children; keep all packing materials well out of the reach of children.

• this appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance must no be carried out by children without supervision.
• Children of less than 3 years should be kept away from the washing maching unless continuously supervised.

Adjusting the leveling leg

• If the floor is uneven, adjust the leveling leg of the washing machine (do not insert pieces of wood or any other objects under the leg)
• When tightening the leg bolt with the wrench during adjustments, avoid movement of the leg.

Fixing the cover bottom and guide-leg

After sticking the adhesive papers tightly, put down the machine body slowly to make four guide-legs fully stick to the ground.

Connecting the hose-water(in)

• After installation, turn on the water faucet to check for any leakage. The instruction for appliances connected to the water mains by detachable hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
• Unplug the appliance and turn off the water faucet after use.

Connecting the hose drain
The end of the hose drain may be positioned in three ways:

1. ln a floor drain directly
   We recommend that you shall use the hose drain attached to the appliance; it can bedirectly inserted into the floor drain with the width of the trough entry not less than 4cm.

2. In a sink hose drain branch:
   The end of the hose drain is connected to a sink hose drain branch. If the hose is too long, it cannot be forced into the washing machine, otherwise abnormal noise may occur. Note: the width of the sink entry shall not less than 4 cm.

3. Over the edge of a wash basin:
   The end of the hose drain must be placed at a height of between 50 and 90 cm from the ground. To avoid the influence of the hose drain bending on water flow, secure it over the edge of the wash basin with a hook or a piece of string to prevent the hose drain from moving.

Note: the end of the hose drain cannot be immersed in water.

Installation requirements

All electrical circuit and grounding must be set as per the national electrical standard.

Power supply

• To avoid the unnecessary risk of fire, electric shock or personal injury, all electrical circuit and grounding must be set as per the national electrical standard. It is the owner’s responsibility to provide proper maintenance on the electrical appliance.
• Do not overload the wall power socket or the extension cord. Otherwise, it may cause fire and electric shock.
• Only the power cord equipped with the washing machine can be used.
• When ready for installation, ensure the power supply complies with the following items: Fuse or breaker of 220V-240\/, SOHz, 10A. When the heating function is used, the maximum current of the washing machine may reach 10A. Ensure that your power supply unit (current, voltage and cable) can meet the normal load requirements of the appliance. Use the State Grid. If you are not sure about the voltage, contact with the manufacturer, product and service agent or qualified person.
• To guarantee your safety, use the three-core socket and check to ensure it is grounded accurately and reliably. (The washing machine has been equipped with a three-core socket.)
• Protect the power cord.
• The power cord has to be positioned so that it will not be stepped on, pressed or clamped  by the article on or next to it. Pay special attention to the power cord of plug, socket and power cord contact of the appliance.

Water supply

• The working water pressure of the washing machine is O.OSMPa-0.8MPa. When the water pressure is below O.OSMPa, the water supply valve may not work normally, or the time of water supply is longer than that of program control, and the display screen shows “SF”.
• The water supply faucet must be less than 122cm away from the rear of the washing machine so that the water supply hose can be easily connected to the washing machine and the water faucet.
• To prevent the risk of water leakage and waterway damage, consider the following:
  • Ensure water tap is at a reasonable position for easy connection.
  • Turn off the water faucet when the washing machine is not used.
  • Check water leakage conditions of the internal loop regularly.

Grounding

• The instructions for appliances incorporating a functional earth, states that the appliance incorporates an earth connection for functional purposes only.
• The washing machine must be grounded. If the washing machine has a fault or cannot run normally, the current can be conducted to the ground, minimizing the risk of electric shock.
• The ground wire cannot be connected to the plastic pipe, gas conduit or hot-water pipeline. If the ground wire is connected to the improper ground conductor, electric shock may occur.
• If you are not sure whether the washing machine is grounded accurately, check and verification verification should be performed by the manufacturer, product and service agent or qualified person.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. The plug attached to the washing machine cannot be transformed. If the plug cannot match the socket, a suited one should be installed by the manufacturer, product and service agent or qualified person.

Ground location
To minimize the vibration or unbalanced load, the wood floor has to be reinforced. The carpet and the soft floor tile surface may cause vibration and slight movement of the washing machine in operation.

Before you install the washing machine, select a location with the following characteristics:

• Do not position the washing machine on a platform or a structure with weak support.
• A hard, level surface (if the surface is uneven, see “Adjusting the leveling leg” ).
• Avoid direct sunlight, with adequate ventilation. (The washing machine shall not be installed in a bathroom or a wet room.)
• Room temperature shall not fall below O 0C.
• Away from sources of heat such as coal or gas stove.

Make sure that the washing machine does not stand on its power cord. Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

Control panel and program description

Control panel and program description facilitate easy operation of the drum washing machine.

Multiprogramming, washing state is absolutely clear

High-Temp

Eradicating invisible residual bacteria, facilitating comprehensive protection for health. Application method of Hi-Temp (boiling) function

Inspection before carrying out Hi-Temp (boiling) program

A. Check the classified washing of clothing

a. Carry out classification based on color and smudginess degree of clothing (for instance, more dirty clothing, unfaded clothing, white clothing, soft clothing etc.).
b. Fasten all attached articles of the clothing and empty the pockets; if there are any damaged parts on the clothing, please repair it before washing.

Never Hi-Temp (boiling) wash the clothing which may fade;

Never Hi-Temp (boiling) soft clothing, such as wool product or ladies underwear etc;
B. Check the cover of machine door

a. Check if machine door is properly closed;
b. If clothing is clamped by the cover of machine door during wash, the clothing may be torn or leakage may occur. Please ensure machine door is closed and clothing is not clamped.

Hi-Temp (boiling) wash program precautions

• Please use a dedicated wall type AC power outlet of 220V-240V/50Hz and 10A;
• Never use power extension line;
• Adopting other supply voltage or current may result in fire, electric shock or power failure;
• Never use this product together with other heating equipment at the same time;
• The temperature of Hi-Temp (boiling) program may be different due to environment;
• The internal temperature may be very high in the boiling wash program, so operate carefully to avoid scalding.
• Provide cold water to cool the hot water, ensure to reach the safe water temperature during drainage;
• Time required for sterilization by program is based on water inlet temperature, the lower water inlet temperature is, the longer time is required;
• With specific design for the washing machine, only cold water will be supplied to cool the hot water after the boiling wash program;
•  Boiling wash program can be kept on only after the machine door is closed;

Delay
Press the button repeatedly to cycle through the available preset delay options (from 3 hour to 19 hours in one hour increments). The washing cycle will be completed in the displayed hours.

Setting method of the preset time:

1. Select a washing program according to the type of clothes you are washing.

2. Press the Preset button repeatedly to select your desired preset time.
   When the time for your selected washing program is more than 3 hours, the preset time shall be set to more than 3 hours.
   Press the button for the first time, displaying “3:00” and the time can be set to “19:00” at most in one hour increments. Continue pressing, the time will increase automatically.

3. Press the Start/ Pause button. The clock will begin counting down until it reaches your finish time.
   If the preset time is set to 6 hours, the washing program will be finished completely after 6 hours.

Cancellation method: press the Power button, this function will be inactivated.
Note: the preset time can be 3 to 19 hours, not less than 3 hours.
The preset function is unsuitable for clothes that are easy to produce static electricity. Delay function is not available for Drum clean program.
Set the preset time at first, then press the “Start/ Pause” button to display the remaining time.

Child Lock
Child-Lock function can prevent accidental washing process due to children’s misuse.

Setting method of the child lock:
This function will be activated when pressing the “delay” button and hold down for 3 seconds. Meanwhile, the indicator lights on.

Cancellation method: press the delay button for 3 seconds to cancel this feature. Remarks: press this button can prevent children operate this machine, during washing, if set “Child-lock” function, all buttons will not work. if need to change the program, cancel “child-lock” function then change, and press ” start/pause”.

Using methods of detergents and additives

Please ensure the cap-drawer is placed at the correct position, and it cannot be taken down during wash

Precautions for using the detergent

A. Determine the amount of laundry liquid
The amount of detergent is based on the water hardness in your area and the detergent manufacturer’s recommendations on the package as well as the weight of laundry, the type of fabric, the degree of soiling etc.
B. Selecting proper laundry liquid
The type of detergent you should use is based on the type of fabric (cotton, delicate items, chemical fiber and wool), color, wash temperature, degree and type of soiling. Always use “low foam” washing powder, which is designed for drum washing machine.

• Keep detergents and additives in a safe, dry place out of the reach of children.
• Please use appropriate amount of detergent according to the type of fabric and the degree of soiling for the sake of environmental protection.
• Appropriate amount of detergent shall be used according to the weight of laundry, the degree of soiling and product description.

Drum clean

This is a drum auto clean program and can remove possibility of mold that may be present in the drum.
Precautions for using drum cleaning function

 Never add clothing into the drum in drum cleaning program.

Application method of drum cleaning function.

• Be sure to use the specialized cleansers to clean the inner drum.
• The drum can be cleaned without cleansers for the Drum clean program.
• The Drum clean program cannot be used when there are clothes in the washing machine, or the laundry or machine may be damaged.
• Only one tenth of drum cleanser amount recommended by the manufacturer shall be used for the sake of environmental protection.
• Bleach containing chlorine may fade the laundry; be sure to use oxygen bleach only.
• There are powder and liquid cleansers to clean the drum.
• Powder cleanser: Please use powder bleach or the cleanser specialized for the inner drum of the washing machine.
• Liquid cleanser: Please use liquid oxygen bleach or the cleanser specialized for the inner drum of the washing machine.
• Never use foam type detergent.

Cleaning the water supply valve filter

You should clean the supply valve filter at least 3 to 4 times per year, or when you see “SF”error message on the display:

Cleaning the water supply valve filter

• Rust : Rusting may occur if water with rust or rusty article, such as hair pin, is put into the drum, or water has been remained in the drum for too long.
• Rust cleaning: Squeeze out the rust removing paste on a soft cloth or sponge, and then wipe the rusty parts.
• Never use a steel brush, otherwise the drum will be damaged.
• Residual detergent: (Dark color and stain) After long service of the washing machine, if excessive detergent is added, or cleaning program is repeated with detergent not dissolved completely, clothing may be contaminated by residual detergent.

Cleaning the enclosure

Clean the housing of washing machine regularly to keep it clean and sanitary

Precautions for cleaning housing of the washing machine

• Wipe the washing machine enclosure, including the control panel, with a soft cloth and nonabrasive household detergents.
• Use a soft cloth to dry the enclosure.
• Do not pour water on the enclosure, as non water-resistant parts of the machine may get damage.

Storing the washing machine

Drain the residual water out of the machine; otherwise the washing machine may be damaged.

Troubleshooting

Problems and solutions

Error messages description

Problems and solutions
A. Your washing machine is installed with the fuzzy logic control system which can automatically detect the balance of laundry during spinning. When the laundry is detected unbalanced or with strong eccentricity by the washing machine, the machine will properly extend the spin time to adjust the balance of the laundry or run at a lower speed when spinning in order to avoid damage to the machine.
B.When there are excessive foams, the time on the display will cease for a spell, meanwhile the machine is eliminating the foams rather than fault, and the machine will automatically return to normal program if finished.
C. Before contacting After-sales Service Department:

• Try to solve the problem (see “Troubleshooting”).
• Restart the program to see if the fault still exists.
• If the fault persists, call after-sales service and describe the problem.

Product Specifications

Enter into the energy efficiency test program: press program button for at least 3 seconds to enter into cotton program. The child lock function is automatically activated when the program starts.

This appliance is intended to be used in household and similar applications such as:

• staff kitchen areas in shops, offices and other working environments;
• farm houses;
• by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments;
• areas for communal use in blocks of flats or in launderettes.

Customer Support & Warranty Information

• Manufacturer: Team Noble International LTD
• Contact number: +86 755 85278182
• Website: www.teamnobleint.com
• Importer : Faxtrans P/L Trading as Fresca
• Imported on behalf of: Razor RV Accessories
• Consumer support Number & Warranty: 03 83545500.
• Warranty: 1 Year Excluding negligence please refer to User Manual.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>