GOLDEN LIGHTING 1088-SF BLK-CLR Adeline 7 Wide Semi Flush Ceiling Fixture Instruction Manual
- June 13, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 1088-SF BLK-CLR Adeline 7 Wide Semi Flush Ceiling Fixture
Product Information
The product is a lighting fixture manufactured by Golden Lighting.
- Model: 1088-SF
- Color: Black with clear glass shade
The fixture arrives fully assembled and ready for installation.
The fixture is designed to provide both task and ambient lighting.
For more information and coordinating lights, visit
www.GoldenLighting.com.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment.
Get function and style! Browse our site for coordinating lights and expert
lighting advice. To help create the perfect look, visit
www.GoldenLighting.com.
Love your light and want to show it off? Follow us, share a picture, and tag us on Social…
DIMENSION
-
Pendants & Linear Pendants Above a Kitchen Island
Center a linear pendant over the island. If hanging pendants, use one pendant for every 24″ of island. Fixtures should hang at least 30″ above the countertop. -
Pendants & Chandeliers Above a Dining Room Table
Fixtures should stay at least 30″ above the table. Use a fixture that is 12″ narrower than the width of the table. -
Pendants and Chandeliers in Open Areas
The bottom should hang at least 7.5 feet from the floor. Allow clearance for any opening doors.
WIRING
How to Identify the Fixture’s Wires
- Hot: Smooth, Black, or Transparent with Black Inner Thread
- Neutral: Ribbed, White or Transparent with White Inner Thread
- Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
Get help, quick tips, and explore curated content:
ASSEMBLY INSTRUCTION
IMPORTANT:
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power
at the circuit breaker and remove old fixture from wall, including the old
mounting strap. 1. From the parts bag remove the mounting strap (B) assembly.
Mounting strap (B) contains several threaded holes. Find the pair of holes
that matches the spacing of the holes on the junction box. Two sets of
mounting screws (A & D) should be attached to mounting strap (B). You may need
to tighten nuts (C) that hold these screws in place. If the screws are not
attached, please hold canopy (F) up to mounting strap (B). Line up the holes
in canopy (F) with the holes in mounting strap (B) and insert mounting screws
(A) into mounting strap (B) so that mounting screws (A) protrude through the
holes in canopy (F). Mounting screws (A) are long, so please test the canopy
against the mounting strap to see how far you should insert the screws. Remove
the canopy (F) and tighten nuts (C) onto mounting screws (A) to hold the
screws in place. 2. Place mounting strap (B) over the junction box and secure
in place using mounting screws (D) and a screwdriver. Tighten the screws
securely. Pull house wires for the center of the mounting strap. Unscrew
socket ring (J) and set aside for later use.
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation.
Please proceed to the next step.
CONNECTING THE WIRES
Have an assistant support the fixture’s weight while completing the wiring.
Refer to the wiring diagram and attach the fixture’s wires to the power supply
wires from the junction box. Attach the fixture’s wires to the power supply
wires from the junction box. Connect Hot to Hot (transparent wire with black
inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with
white inner thread, white, or ribbed wire), and Ground to Ground (transparent
wire with green inner thread, green wire, or copper). Twist the ends of the
wire pairs together, and then twist on a wire connector. Make sure all twists
are in the same direction. If there is no house ground wire coming from the
junction box, locate ground screw (E) on the mounting bracket/mounting strap
and wrap the fixture’s ground wire around the ground screw. Use a screwdriver
to tighten the top of ground screw (E) onto the wires and into the mounting
bracket/mounting strap. Tuck the wires into the junction box.
FINISHING THE INSTALLATION
Lift the canopy (F) up to the ceiling over mounting strap (B) until
mounting screws (A) protrude from the holes in the canopy (F). Thread deco
nuts (G) onto exposed threads of mounting screws (A). Tighten until the canopy
(F) is snug against the ceiling. 5. Carefully lift glass shade (I) over the
socket (H) and secure in place using socket ring (J). 6. Install a light bulb
(not included) in accordance with the fixture’s specifications. Do not exceed
the maximum recommended wattage. Your installation is now complete. Turn on
the power and test the fixture.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>