V TAC VT-150030ST LED Street Light User Manual
- June 13, 2024
- V TAC
Table of Contents
V TAC VT-150030ST LED Street Light
DIMENSION
TECHNICAL SPECIFICATIONS
MODEL| SKU| WATTS| LUMENS@WIDE CONE| LxWxH (mm)| CRI| INPUT VOLTAGE| BEAM
ANGLE| DF| LIFESPAN[HOURS]| ON/OFF CYCLE| SURGE PROTECTION GRADE| N.W (KGS)|
MAX MOUNTING HEIGHT| OPERATION TEMPERATURE
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---
VT-150030ST| 7886,7887| 30W| 2505LM| 333×138.4x92mm| >70| AC:220-240V,50/60Hz|
115°| 0.9| 25,000| >15000| 1KV/2KV| 0.527| <5M| -20°C to +45°C
VT-150050ST| 7888,7889| 50W| 4270LM| 386.5×149.4x92mm| >70|
AC:220-240V,50/60Hz| 115°| 0.9| 25,000| >15000| 2KV/4KV| 0.662| <5M| -20°C to
+45°C
VT-150100ST| 7890,7891| 100W| 8700LM| 480×179.4x92mm| >70|
AC:220-240V,50/60Hz| 115°| 0.9| 25,000| >15000| 2KV/4KV| 1.165| <5M| -20°C to
+45°C
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn o the power before starting the installation.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard. Replace any cracked protective shield.
- Minimum distance from lighted objects 1m.
- Proper grounding should be ensured throughout the installation.
- Please read through all following instructions before installing the unit.
- User should prepare all the necessary accessories and spare parts (Spare parts not provided) including junction box.
- The raised lighting must be connected to the earth ground.
- Installation must be performed by a qualified electrician. Strictly follow these instructions for installing, avoid the intensity of power cable during installing.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
INSTALLATION INSTRUCTION
DISASSEMBLY DIAGRAM
INSTALLATION INSTRUCTION
-
Switch OFF the power before starting the installation.
-
Connect supply wires to the luminaire as displayed in the wiring diagram.
-
(a) For Pole: Pass the cable through the mounting adaptor, tighten the screws on the pole with an M8 Allen wrench. Use the wrench to loosen the screw on the luminaire and adjust the angle and tighten them
(b) For wall: Pass the cable through the mounting adaptor, Fasten screws against the wall by 4PCs of M8 screws (NOT INCLUDED). Use the wrench to loosen the screw on the luminaire and adjust the angle and tighten them. -
Turn ON the power to Test
Customer Support
CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>