BELKIN F6D6050EA Double N Plus Wireless USB Adapter User Manual
- June 13, 2024
- belkin
Table of Contents
F6D6050EA Double N Plus Wireless USB Adapter
Product Information: Product Name: Double N+ Wireless USB
Adapter Model Number: F6D6050ea Manufacturer: Belkin Website:
https://manual-hub.com/
Product Usage Instructions: 1. Installing and Setting up
the Adapter: A. Installation Process for Windows Vista: –
Follow the instructions provided in the user manual starting from
page 8. B. Installation Process for Windows Operating Systems other
than Windows Vista: – Follow the instructions provided in the user
manual starting from page 18. C. Configuration: – Follow the
instructions provided in the user manual starting from page 24.
2. Troubleshooting: – If you experience any issues with the
performance of your wireless network, refer to the troubleshooting
section in the user manual starting from page 40. 3.
Information: – For additional information about the product and
its features, refer to the information section in the user manual
starting from page 47. 4. Placement of your Wireless Networking
Hardware for Optimal Performance: – If you are experiencing
performance issues with your network, follow these steps: 1. Place
your wireless router (or access point) as close as possible to the
center of your wireless network devices. 2. Avoid obstacles and
interference that may block the signal’s path between your
computers and wireless router (or access point). 3. If you have a
cordless phone, ensure it is not causing any interference with your
wireless network. Note: If difficulties persist, even after
following these steps, please contact Belkin Technical Support for
further assistance. Please refer to the user manual for detailed
instructions on each of the above sections.
Double N+ Wireless USB Adapter
User Manual
8820ea00268 F6D6050ea
TABLE OF CONTENTS
Table of Contents
SECTION
1
2
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . 1 Benefits of a Home Network
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 1 Advantages of a Wireless Network . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 1 Placement of your Wireless Networking
Hardware for Optimal Performance . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Product Features. . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . 5 Applications and Advantages . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Product
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . 6 System Requirements . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . 7
3 Installing and Setting up the Adapter . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . 8 A. Installation Process for Windows Vista . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . 8 B. Installation
Process for Windows Operating Systems other
than Windows Vista. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . 18 C. Configuration . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . 24
3
4
5
6
4 Using the Belkin Wireless Networking Utility . . . . . . . . . . . . . . . .
. . . . . . . .25 Accessing the Belkin Wireless Networking Utility from the
Windows System Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .25 Network Status . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.25 Available Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .26 Network Status and Solution
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.26 Setting Wireless Network Profiles . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .27 Securing your Wi-Fi Network . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Configuring your Adapter to use Security . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . 31
5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .40
6 Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . 47
Double N+ Wireless USB Adapter
i
INTRODUCTION
Table of Contents
SECTION
1
2
3
4
5
6
Thank you for purchasing the Belkin Double N+ Wireless USB Adapter. Now you can take advantage of this great new technology and gain the freedom to network your home and office computers wirelessly. This Adapter allows you to connect a notebook computer to your network. Please be sure to read through this User Manual completely, and pay special attention to the section entitled “Placement of your Wireless Networking Hardware for Optimal Performance”.
Benefits of a Home Network
Your Belkin Home Network will allow you to: · Share one high-speed Internet
connection
with all the computers in your home · Share resources, such as files and hard
drives among
all the connected computers in your home
Advantages of a Wireless Network
· Mobility you’ll no longer need a dedicated “computer room”–now you can
work on a networked laptop or desktop computer anywhere within your wireless
range
· Easy installation The Belkin Setup Assistant software makes setup simple
· Flexibility set up and access printers, computers, and other networking
devices from anywhere in your home
· Share a single printer with the entire family · Share documents, music,
video, and digital pictures · Store, retrieve, and copy files from one
computer to another · Simultaneously play games online, check Internet email,
and chat
· Easy Expansion the wide range of Belkin networking products lets you
expand your network to include devices such as printers and gaming consoles
· No cabling required you can spare the expense and hassle of retrofitting
Ethernet cabling throughout the home or office
· Widespread industry acceptance choose from a wide range of interoperable
networking products
Double N+ Wireless USB Adapter
1
INTRODUCTION
Table of Contents
SECTION
1
2
3
4
5
6
Placement of your Wireless Networking Hardware for Optimal Performance
Your wireless connection will be stronger the closer your computer is to your
wireless router (or access point). Typical indoor operating range for your
wireless devices is between 100 and 200 feet. In the same way, your wireless
connection and performance will degrade somewhat as the distance between your
wireless router (or access point) and connected devices increases. This may or
may not be noticeable to you. As you move farther from your wireless router
(or access point), connection speed may decrease. Factors that can weaken
signals simply by getting in the way of your network’s radio waves are metal
appliances or obstructions, and walls.
If you have concerns about your network’s performance that might be related to
range or obstruction factors, try moving the computer to a position between
five and 10 feet from the wireless router (or access point) in order to see if
distance is the problem. If difficulties persist even at close range, please
contact Belkin Technical Support.
Note: While some of the items listed below can affect network performance,
they will not prohibit your wireless network from functioning; if you are
concerned that your network is not operating at its maximum effectiveness,
this checklist may help
1. Placement of your Wireless Router (or Access Point)
Place your wireless router (or access point), the central connection point of
your network, as close as possible to the center of your wireless network
devices.
To achieve the best wireless network coverage for your “wireless clients,”
(i.e., computers enabled by Belkin Adapters or Cards):
· Ensure that your wireless router’s (or access point’s) antennas are parallel
to each other, and are positioned vertically (toward the ceiling). If your
wireless router (or access point) itself is positioned vertically, point the
antennas as much as possible in an upward direction
· In multistory homes, place the wireless router (or access point) on a floor
that is as close to the center of the home as possible. This may mean placing
the wireless router (or access point) on an upper floor.
· Try not to place the wireless router (or access point) near a cordless
2.4GHz phone.
Double N+ Wireless USB Adapter
2
INTRODUCTION
Table of Contents
SECTION
1
2
2. Avoid Obstacles and Interference
Avoid placing your wireless router (or access point) near devices that may
emit radio “noise”, such as microwave ovens. Other objects that can inhibit
wireless communication can include: · Refrigerators · Washers and/or dryers ·
Metal cabinets · Large aquariums · Metallic-based, UV-tinted windows ·
Microwaves
If your wireless signal seems weak in some spots, make sure that objects such
as these are not blocking the signal’s path between your computers and
wireless router (or access point).
3
4
5
6
3. Cordless Phone Placement
If the performance of your wireless network is impaired after attending to the
above issues, and you have a cordless phone:
· Try moving cordless phones away from the wireless router (or access point)
and your wireless-enabled computers.
· Unplug and remove the battery from any cordless phone that operates on the
2.4GHz band (check manufacturer’s information). If this fixes the problem,
your phone may be interfering.
· If your phone supports channel selection, change the channel on the phone to
the farthest channel from your wireless network as possible. For example,
change the phone to channel 1 and move your wireless router (or access point)
to channel 11. (Your channel selection will vary depending on your region.)
See your phone’s user manual for detailed instructions.
· If necessary, consider switching to a 900MHz or 5GHz cordless phone.
Double N+ Wireless USB Adapter
3
INTRODUCTION
Table of Contents
SECTION
1
2
4. Choose the “Quietest” Channel for your Wireless Network
In locations where homes or offices are close together, such as apartment
buildings or office complexes, there may be wireless networks nearby that can
conflict with yours. Use the Site Survey capabilities of your Belkin Wireless
Networking Utility to locate any other wireless networks, and move your
wireless router (or access point) and computers to a channel as far away from
other networks as possible
Experiment with more than one of the available channels in order to find the
clearest connection and avoid interference from neighboring cordless phones or
other wireless devices.
For more Belkin wireless networking products, use the detailed Site Survey and
wireless channel information included in your User Manual.
5. Secure Connections, VPNs, and AOL
Secure connections typically require a user name and password, and are used
where security is important. Secure connections include:
· Virtual Private Network (VPN) connections, often used to connect remotely to
an office network
· The “Bring Your Own Access” program from America Online (AOL), which lets
you use AOL through broadband provided by another cable or DSL service
· Most online banking websites · Many commercial websites that require a user
name and password to access your account
3
4
5
6
Secure connections can be interrupted by a computer’s power management
setting, which causes it to “go to sleep.” The simplest solution to avoid this
is to simply reconnect by re-running the VPN or AOL software, or by re-logging
into the secure website.
A second alternative is to change your computer’s power management settings so
it does not go to sleep; however, this may not be appropriate for portable
computers. To change your power management setting in Windows, see the “Power
Options” item in the Control Panel.
If you continue to have difficulty with Secure Connections, VPNs, and AOL,
please review steps 14 in the previous pages to be sure you have addressed
these issues.
These guidelines should allow you to cover the maximum possible area with your
wireless router. Should you need to cover an even wider area, we suggest the
Belkin Wireless Range Extender/Access Point.
For more information regarding our networking products, visit our website at
www.belkin.com/networking or call Belkin Technical Support.
Double N+ Wireless USB Adapter
4
OVERVIEW
Table of Contents
SECTION
1
2
3
4
5
6
Product Features
The Adapter complies with the IEEE 802.11n specification to communicate with
other 802.11n-compliant wireless devices at up to 300Mbps. The Adapter is
also compatible with 802.11a/g devices at 54Mbps as well as 802.11b products
at 11Mbps. The Adapter can operate on the same 2.4GHz frequency band as
802.11b/g Wi-Fi® products or 5GHz frequency band as 802.11a Wi-Fi products.
· 2.4GHz or 5GHz band operation · Integrated easy-to-use Belkin Wireless
Networking Utility for
Windows 2000 and XP · USB 2.0 interface, for operation in virtually any
computer with a
USB 2.0 bus-power port · WPA, WPA2, 64-bit WEP (Wired Equivalent Privacy), or
128-bit
WEP encryption · Wireless access to networked resources · Data rate of up to
300Mbps (802.11n), 54Mbps (802.11a/g), or
11Mbps (802.11b) · Easy installation and use · LED power and network
link/activity indicator
Double N+ Wireless USB Adapter
5
OVERVIEW
Table of Contents
SECTION
1
2
Applications and Advantages
· Wireless roaming with a laptop around the home or office Offers the freedom
of networking without cables
· Connection rates of up to 300Mbps* Provides immediate highspeed wireless
connectivity at home, work, and hotspot locations without compromising the use
of existing 802.11b/g products
· Compatibility with 802.11a/b/g products The Adapter is backward-compatible
with existing Wi-Fi (IEEE 802.11a/b/g) products
· Difficult-to-wire environments Enables networking in buildings with solid or
finished walls, or open areas where wiring is difficult to install
· Frequently changing environments Adapts easily in offices or environments
that frequently rearrange or change locations
· SOHO (Small Office/Home Office) networking needs Provides the easy and
quick, small network installation SOHO users need
3
4
5
6
Product Specifications
Host Interface: USB 2.0 Operating Temperature: 32131 degrees F (055 degrees
C) Storage Temperature: -4149 degrees F (-2065 degrees C) Humidity: Max. 90%
(non-condensing) Maximum Operating Range: Up to 1,200 ft.* NOTE: The
standard transmission rate–300Mbps–is the physical data rate. Actual data
throughput will be lower. **Wireless performance may vary depending on the
networking environment.
Double N+ Wireless USB Adapter
6
OVERVIEW
Table of Contents
SECTION
1
(c)
Double N+ Wireless USB Adapter
2
3
4
5
6
(b) (a)
a) Power/Activity LED Lights when the Adapter is powered on and flashes when
it is active.
(b) WPS/Security LED Indicates security status and provides feedback during
Wi-Fi Protected SetupTM handshaking.
(c) WPS Push Button Used for Wi-Fi Protected Setup handshaking with routers
(on Windows XP and 2000 systems with the Belkin utility only). This button is
functional on Windows Vista only when the software application is installed.
(d) USB Connector Part of the Adapter that fits into your computer’s USB port.
(e) Desktop Stand Lets you move the Adapter away from interfering objects
around your computer.
System Requirements
· PC-compatible laptop with one available USB 2.0 bus-power port · Windows®
2000, XP with SP2, Vista®, or 7***
Package Contents
· Double N+ Wireless USB Adapter · Quick Installation Guide · CD with
Installation Software and User Manual · Desktop Stand
7
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
3
4
5
6
A. Installation Process for Windows Vista
***NOTE: For information on updated drivers, please visit the Belkin website
at www.belkin.com/support
IMPORTANT: INSTALL THE SOFTWARE BEFORE INSERTING THE ADAPTER.
A.1 Insert the Installation Software CD into your CD-ROM drive. A.2 Click
“Next” to begin the installation process.
Double N+ Wireless USB Adapter
Note: If the Belkin Wireless Card Installer screen does not appear within 20
seconds, access your CD-ROM by double-clicking on the “My Computer” icon; then
double-click on the CD-ROM drive into which the installation CD has been
placed. If the Installer does not start automatically, double-click on the
icon named “Setup.exe”.
8
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
A.3 The InstallShield Wizard starts the installation process.
3
4
5
6
A.4 Select a destination folder for the software installation by clicking “Browse”; or, simply click “Next” to select a default location.
Double N+ Wireless USB Adapter
9
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
A.5 A Setup Status screen will let you know where you are in the setup process.
3
4
5
6
A.6 Your Adapter has a physical push button that allows it to easily connect to a WPS-enabled access point. On some operating systems, you may be asked to install an app to enable this button.
Double N+ Wireless USB Adapter
10
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
A.7 A window may appear a second time showing the message, “Windows can’t verify the publisher of this driver software”. This DOES NOT indicate a problem. Our software has been fully tested and is compatible with this operating system.
3
4
5
6
A.8 When prompted, turn off your computer and plug in your Adapter. Your installation is now complete.
Double N+ Wireless USB Adapter
11
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
A.9 When the installation completes, click on “Finish”.
3
4
5
6
A.10 The Found New Hardware Wizard might appear within 315 seconds. If it does, continue to follow the prompts. Select “Locate and install the driver software” to continue.
Double N+ Wireless USB Adapter
12
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
A.11 You might see a screen similar to the one pictured below. This DOES NOT mean there is a problem. Our software has been fully tested and is compatible with this operating system. Select “Install this driver software anyway” and follow the on-screen instructions.
3
4
5
6
A.12 To connect to the Internet, open the Network and Sharing Center by first opening the Control Panel from the “Start” menu.
Next, a screen appears indicating that hardware installation is taking place;
then, another indicates that the process is complete.
Double N+ Wireless USB Adapter
13
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
3
4
5
6
A.13 In the Control Panel, click on “View network status and tasks”.
A.14 In the Network and Sharing Center, click on “Connect to a network”.
Double N+ Wireless USB Adapter
14
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
A.15 In the next screen, select an available wireless network and click “Connect”.
3
4
5
6
A.16 Your Adapter will attempt to connect to the selected network.
Double N+ Wireless USB Adapter
15
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
A.17 Depending on the security settings of your wireless network, you may be prompted to enter a network security key or a passphrase. Click “Connect” after you have done so.
3
4
5
6
A.18 After connecting to the network, you can choose to save this network and connect automatically when your Adapter is in range.
Double N+ Wireless USB Adapter
16
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
3
4
5
6
A.19 The Network and Sharing Center now indicates the network connection that you have just made. The links on the left of the window allow you to configure your network connections.
Double N+ Wireless USB Adapter
17
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
3
4
5
6
B. Installation Process for Windows Operating Systems other than Windows Vista
IMPORTANT: INSTALL THE SOFTWARE BEFORE INSERTING THE ADAPTER.
B.1 Insert the Installation Software CD into your CD-ROM drive.
B.2 The Belkin Wireless Card Installer screen will automatically appear within
up to 20 seconds. Click “Install Software” or “Next” to start the
installation.
Double N+ Wireless USB Adapter
Note: If the Belkin Wireless Card Installer screen does not appear within 20
seconds, access your CD-ROM by double-clicking on the “My Computer” icon; then
double-click on the CD-ROM drive into which the installation CD has been
placed. Then, double-click on the icon named “Setup.exe”.
18
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
B.3 The InstallShield Wizard starts the installation process.
3
4
5
6
B.4 Select a destination folder for the software installation by clicking “Browse”; or, simply click “Next” to select a default location.
Double N+ Wireless USB Adapter
19
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
B.5 A Setup Status screen lets you know where you are in the setup process.
3
4
5
6
B.6 After the software installation is finished, the following message will appear. Connect the Adapter to your computer.
Double N+ Wireless USB Adapter
20
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
3
4
5
6
B.7 The Found New Hardware Wizard might appear in 315 seconds. If it does, select “Yes, this time only” and click “Next” to install the hardware.
B.8 Select “Install the software automatically (Recommended)” and click “Next” to continue.
Double N+ Wireless USB Adapter
21
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
3
4
5
6
B.9 You might see a screen similar to this one. This DOES NOT mean there is a problem. Our software has been fully tested and is compatible with this operating system. Select “Continue Anyway” and follow the on-screen instructions.
B.10 The Wizard will now install your software.
Double N+ Wireless USB Adapter
22
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
B.11 The installation is now complete. Click “Finish” to close the “Found New Hardware Wizard”.
3
4
5
6
B.12 Click “Finish” again to exit the InstallShield Wizard.
B.13 Depending on which operating system you are using, you might be required
to reboot your computer for the changes to take effect. Save your data and
close all other applications. Then, click on “Finish” to reboot your computer.
Double N+ Wireless USB Adapter
23
INSTALLING AND SETTING UP THE ADAPTER
Table of Contents
SECTION
1
2
C. Configuration
Using the Belkin Wireless Networking Utility (Windows 2000 and XP only)
C.1 After restarting your computer, double-click the Belkin Wireless
Networking Utility icon on the desktop screen.
3
4
5
6
C.2 The Belkin Wireless Networking Utility screen will appear.
C.3 Select a network to which to connect from the “Available Networks” list
and click “Connect”.
Note: The Belkin Wireless Networking Utility icon can also be found on the system tray.
Double N+ Wireless USB Adapter
Note: In order to see your available networks, you must be near a working
wireless router or access point. Installation is now complete.
24
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
3
4
5
6
After successfully installing the Belkin Wireless Networking Utility (WNU),
configurations for wireless connection and security are just a few easy clicks
away.
Accessing the Belkin Wireless Networking Utility from the Windows System Tray
To access the WNU, simply place your mouse pointer and right-click over the
WNU icon on the Windows task tray.
If the icon is not present, click on “Start > Programs > Belkin > Double N+ Wireless USB Network Adapter > Double N+ Wireless USB Adapter Utility”.
The WNU’s default screen is the “Current Status” tab. The “Current Status” tab
displays the current Network Status and Available Networks.
Network Status
This window displays the connectivity status of the current network. It even
displays connectivity between the computer and router, and router and
Internet. In the event of a connectivity problem, this window can be used to
determine the problem’s source (e.g. computer, router, or Internet/modem).
Double N+ Wireless USB Adapter
25
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
Available Networks
This window displays the available networks at the current location as well as
their SSID, signal strength, security enabled/disabled, WPS enabled/disabled,
channel, mode, and network type.
Lost Wireless Connection A pop-up window will appear if the current wireless
connection is lost.
3
4
5
6
Network Status and Solution Tips
To further understand the current Network Status, click “Open Wireless
Utility”. The default screen will be the “Current Status” tab and the “Network
Status” section displays the current connection status.
Double N+ Wireless USB Adapter
The WNU also features an “Info” section that provides troubleshooting tips.
26
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
Setting Wireless Network Profiles
The “My Connections” tab on the WNU allows you to add, edit, and delete
connection profiles. It also displays signal strength, security, and network
type.
3
4
5
6
Securing your Wi-Fi® Network
If you choose to connect to a secure network, the utility will automatically
determine what type of security is used (WPA/WPA2 or WEP). Type your key in
the “Encryption key” field.
Double N+ Wireless USB Adapter
27
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
Note: When you select a network using encryption, you will first see the simple security screen. Click the “Advanced” button to see other security options (below).
3
4
5
6
Wireless Equivalent Privacy (WEP) is a less secure, but more widely adopted
wireless security protocol. Depending on the security level (64or 128-bit),
the user will be asked to input a 10- or 26-character hex key. A hex key is a
combination of letters, af, and numbers, 09.
Wi-Fi Protected Access (WPA/WPA2) is the new standard in the wireless
security. Instead of a hex key, WPA/WPA2 uses only passphrases, which are much
easier to remember.
The following section, intended for the home, home-office, and smalloffice
user, presents a few different ways to maximize the security of your wireless
network.
Double N+ Wireless USB Adapter
28
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
3
4
5
6
At the time of publication, four encryption methods are available: Encryption Methods:
Name Acronym
64-bit Wired Equivalent Privacy
64-bit WEP
Security Good Features Static keys
Encryption keys based on RC4 algorithm (typically 40-bit keys)
128-bit Encryption
Wi-Fi Protected Access
Wi-Fi Protected Access
128-bit WEP WPA-TKIP/AES WPA2-AES (or just WPA) (or just WPA2)
Better
Best
Best
Static keys
Added security over 64-bit WEP using a key length of 104 bits, plus 24
additional bits of systemgenerated data
Dynamic key encryption and mutual authentication
Dynamic key encryption and mutual authentication
TKIP (temporal key integrity protocol) added so that keys are rotated and encryption is strengthened
AES (Advanced Encryption Standard) does not cause any throughput loss
WEP
WEP is a common protocol that adds security to all Wi-Fi-compliant wireless
products. WEP gives wireless networks the equivalent level of privacy
protection as a comparable wired network.
64-Bit WEP
64-bit WEP was first introduced with 64-bit encryption, which includes a key
length of 40 bits plus 24 additional bits of system-generated data (64 bits
total). Some hardware manufacturers refer to 64-bit as 40-bit encryption.
Shortly after the technology was introduced, researchers found that 64-bit
encryption was too easy to decode.
128-Bit Encryption
As a result of 64-bit WEP’s potential security weaknesses, a more secure
method of 128-bit encryption was developed. 128-bit encryption includes a key
length of 104 bits plus 24 additional bits of systemgenerated data (128 bits
total). Some hardware manufacturers refer to 128-bit as 104-bit encryption.
Most of the new wireless equipment in the market today supports both 64-bit
WEP and 128-bit WEP encryption, but you might have older equipment that only
supports 64-bit WEP. All Belkin wireless products will support both 64-bit WEP
and 128-bit encryption.
Double N+ Wireless USB Adapter
29
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
Encryption Keys After selecting either the 64-bit WEP or 128-bit encryption
mode, it is critical that you generate an encryption key. If the encryption
key is not consistent throughout the entire wireless network, your wireless
networking devices will be unable to communicate with one another. You can
enter your key by typing in the hex key. A hex (hexadecimal) key is a
combination of numbers and letters from AF and 09. For 64-bit WEP, you must
enter 10 hex characters. For 128-bit WEP, you must enter 26 hex characters.
For instance: AF 0F 4B C3 D4 = 64-bit WEP key C3 03 0F AF 0F 4B B2 C3 D4 4B C3
D4 E7 = 128-bit WEP key
Write down the hex WEP key from your wireless router (or access point) and
enter it manually into the hex WEP key table in your Adapter’s configuration
screen.
3
4
5
6
WPA
WPA is a new Wi-Fi standard that improves upon the security features of WEP.
To use WPA security, the drivers and software of your wireless equipment must
be upgraded to support it. These updates will be found on your wireless
vendor’s website. There are three types of WPA security: WPA-PSK (no server),
WPA (with radius server), and WPA2.
WPA-PSK (no server) uses what is known as a pre-shared key as the network key.
A network key is a password that is between eight and 63 characters long. It
can be a combination of letters, numbers, or characters. Each client uses the
same network key to access the network. Typically, this is the mode that will
be used in a home environment.
WPA (with radius server) works best in a business environment, in which a
radius server automatically distributes the network key to clients.
WPA2 requires Advanced Encryption Standard (AES) for encryption of data, which
offers much greater security than WPA. WPA uses both Temporal Key Integrity
Protocol (TKIP) and AES for encryption.
Setting up your Belkin Wireless Router (or Access Point) to use Security
To start using security, you must first enable WEP or WPA for your wireless
router (or access point). For Belkin Wireless Routers (or Access Points),
these security features can be configured through the webbased interface. See
your wireless router’s (or access point’s) manual for directions on how to
access the management interface.
IMPORTANT: You must now set all wireless network cards/adapters to match these
settings.
Double N+ Wireless USB Adapter
30
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
Configuring your Adapter to use Security
At this point, you should already have your wireless router (or access point)
set to use WPA or WEP. In order for you to gain wireless connection, you must
set your Double N+ Wireless USB Adapter to use the same security settings.
Changing the Wireless Security Settings
Your Belkin Double N+ Wireless USB Adapter supports advanced security
technology, including Wi-Fi Protected AccessTM 2 (WPA2TM), Wired Equivalent
Privacy (WEP), and Wi-Fi Protected SetupTM (WPS), which simplifies the setup
of a wireless network. WPS uses familiar methodologies, such as typed Personal
Identification Number (PIN) entry and push-button network-name configuration.
This automatically enables strong WPA/WPA2 data encryption and authentication.
3
4
5
6
Using Wi-Fi Protected Setup
Both versions of Wi-Fi Protected Setup (push button and PIN) are supported
with the Belkin utility on Windows 2000 and XP. The hardware push button
method is supported on Windows Vista only when the optional utility is
installed.
When attempting to connect to a WPS-enabled network, the following screen will
appear:
Double N+ Wireless USB Adapter
1. Personal Identification Number (PIN) Method: In this method, your Double
N+ Wireless USB Adapter generates a PIN to be entered into your router.
2. Advanced Configuration Method: For manual connection to a secured network.
31
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
WPS uses WPA2 (described below) for encryption. It does not provide additional
security. Instead, it standardizes the method for securing your wireless
network. On your client utility, WPS-enabled networks are denoted with the key
icon. You may use either the PBC method or PIN method to allow a device access
to your wireless network. The two methods work as follows:
PBC: Push and hold the WPS button located on your USB Adapter for two seconds.
(Alternatively, you may click the “WPS Connect” button on the Belkin utility
instead of the physical push button.) Then, complete the WPS procedure on the
router within two minutes. Your client will automatically exchange the
security information and be added to your wireless network. The PBC method can
also be initiated from the router; however, it is recommended to start the
procedure from your USB Adapter.
3
4
5
6
You will see the following message if the procedure is initiated from the router:
If the process is started from the client, you will see this message:
You will see the following message during the connection process:
The client will be automatically enrolled into your wireless network within two minutes.
Double N+ Wireless USB Adapter
32
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
PIN: Your notebook computer has an 8-digit PIN that is associated with WPS. Select the WPS-enabled network and click “Connect” to start the WPS process. Choose the PIN-method option and complete the WPS procedure on your router’s setup utility.
3
4
5
6
If desired, you may connect manually to a WPS-enabled network. Click on the “Advanced” tab to open the following window:
You will see the following message during the connection process:
The client will be automatically enrolled into your wireless network within two minutes.
Double N+ Wireless USB Adapter
Enter in the encryption key and security method in order to join this network.
The following section describes how to connect to a secure network that does
not support WPS.
33
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
3
4
5
6
The Belkin Double N+ Wireless USB Adapter supports the latest WPA security
feature as well as the legacy WEP security standard. By default, wireless
security is disabled.
To enable security, you first must determine which standard is used by the
router (or access point). (See your wireless router’s or access point’s manual
for directions on how to access the security settings.)
To access the security settings on your Adapter, click the “My Connections”
tab and point to the connection for which you want to change security
settings. Click “Edit” to change settings.
Double N+ Wireless USB Adapter
34
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
3
4
5
6
WEP Setup 64-Bit WEP Encryption
1. Select “WEP” from the “Data Encryption” drop-down menu.
2. After selecting your WEP encryption mode, you can enter your key by typing
in the hex key manually. A hex (hexadecimal) key is a combination of numbers
and letters from AF and 09. For 64-bit WEP, you must enter 10 hex
characters.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
3. Click “Save” to finish. Encryption in the wireless router (or access
point) is now set. Each of your computers on your wireless network will now
must be configured with the same security settings.
WARNING: If you are using a wireless client to turn on the security settings
in your wireless router (or access point), you will temporarily lose your
wireless connection until you activate security on your wireless client.
Please record the key prior to applying changes in the wireless router (or
access point). If you don’t remember the hex key, your client will be locked
out of the wireless router (or access point).
Double N+ Wireless USB Adapter
35
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
3
4
5
6
128-Bit WEP Encryption
1. Select “WEP” from the drop-down menu. 2. After selecting your WEP
encryption mode, you can enter your key
by typing in the hex key manually. A hex (hexadecimal) key is a combination of
numbers and letters from AF and 09. For 128-bit WEP, you must enter 26 hex
characters. For instance: C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 =128-bit WEP
key 3. Click “Save” to finish. Encryption in the wireless router (or access
point) is now set. You must now configure each of the computers on your
wireless network with the same security settings.
WARNING: If you are using a wireless client to turn on the security settings
in your wireless router (or access point), you will temporarily lose your
wireless connection until you activate security on your wireless client.
Please record the key prior to applying changes in the wireless router (or
access point). If you don’t remember the hex key, your client will be locked
out of the wireless router (or access point).
Double N+ Wireless USB Adapter
36
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
3
4
5
6
WPA-PSK
Choose this setting if your network does not use a radius server. WPAPSK is
typically used in home and small office networking.
1. From the “Network Authentication” drop-down menu, select “WPA-PSK”.
2. Enter your network key. This can be from eight to 63 characters and can be
letters, numbers, or symbols. This same key must be used on all of the clients
(network cards) that you want to include in your wireless network.
3. Click “Save” to finish. You must now set all clients (network cards) to
match these settings.
Double N+ Wireless USB Adapter
37
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
Wireless Networking Utility Options
3
4
5
6
Wireless Networking Utility Options
The WNU “Help” tab provides users with access to online and telephone support,
one-click check for upgrades to updated versions of software, and advanced
diagnostic tools.
The “Options” tab on the WNU provides the user the ability to customize his or her WNU settings.
Double N+ Wireless USB Adapter
38
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents
SECTION
1
2
3
4
5
6
Advanced Diagnostic Tools
The “Advanced Diagnostic Tools” section is the central control panel for all
the settings of the hardware and software components of the wireless network.
It provides an array of tests and connectivity services to ensure optimal
network performance.
Double N+ Wireless USB Adapter
39
TROUBLESHOOTING
Table of Contents
SECTION
1
2
3
4
5
6
I can’t connect to the Internet wirelessly. If you are unable to connect to
the Internet from a wireless computer, please check the following items.
1. Look at the lights on your wireless router. If you’re using a Belkin
Wireless Router, the lights should be as follows: · The “router” light should
be on. · The “modem” light should be on, and not blinking. · The “internet”
light should be, and not blinking.
If your Belkin Wireless Router’s lights have the above characteristics, go to
number 2 below.
If this is NOT the case, make sure: · The router’s power cord is plugged in. ·
All cables are connected between the router and the modem. · All the modem’s
LEDs are functioning correctly. If not, see your modem’s user manual. · Reboot
the router. · Reboot the modem.
If you continue to have issues, please contact Belkin Technical Support. If
you are not using a Belkin Wireless Router, consult that router manufacturer’s
user guide.
2. Open your wireless utility software by clicking on the icon in the system
tray at the bottom right-hand corner of the screen. The tray icon should look
like this (the icon may be red or green):
3. The window that opens should have a list of “Available Networks”.
Available networks are wireless networks to which you can connect.
Double N+ Wireless USB Adapter
40
TROUBLESHOOTING
Table of Contents
SECTION
1
2
The name of your wireless network appears in “Available Networks”.
If the correct network name is listed in the “Available Networks” list, please
follow the steps below to connect wirelessly.
1. Click on the correct network name in the “Available Networks” list.
2. If the network has security (encryption) enabled, you must enter the
network key. Click “Connect”. For more information regarding security, see the
page entitled: “Securing your Wi-Fi Network” on page 27 of this User Manual.
3. Within a few seconds, the tray icon in the lower right-hand corner of your
screen should turn green, indicating a successful connection to the network.
If you are still unable to access the Internet after connecting to the
wireless network, please contact Belkin Technical Support.
3
4
5
6
The name of your wireless network DOES NOT appear in the list of “Available
Networks”.
If the correct network name is not listed, check the SSID settings to see if
they match. The SSID is case-sensitive and the spelling on each computer must
be exactly the same in order for the Adapter to connect to the wireless router
(or access point).
Note: To check the SSID settings or look for an available network, double-
click the Signal Indicator icon to bring up the “Wireless Networks” screen.
Click “Add” if you do not see the network you are trying to connect to and
type in the SSID. For more information about setting up an SSID, please
reference your router manufacturer’s user manual.
If issues persist even at close range, please contact Belkin Technical
Support.
Double N+ Wireless USB Adapter
41
TROUBLESHOOTING
Table of Contents
SECTION
1
2
Installation CD-ROM does not start Belkin Wireless Networking Utility
installer.
If the CD-ROM does not start the Belkin Wireless Networking Utility installer
automatically, it could be that the computer is running other applications
that are interfering with the CD drive. If the Belkin Wireless Networking
Utility installer screen does not appear within 15-20 seconds, open up your
CD-ROM drive by double-clicking on the “My Computer” icon. Next, double-click
on the CD-ROM drive in which the Installation CD has been placed to start the
installation. If the installation does not start automatically, right-click to
select “Explore”, then doubleclick on the icon named “setup.exe”.
Power LED does not come ON; Adapter is not working.
If the LED indicators are not ON, the problem may be that the Adapter is not
connected or installed properly. Verify that the Adapter is plugged firmly
into the USB port of your computer. Check to see that the drivers for the
Adapter have been installed. Right-click on the “My Computer” icon on your
desktop. Choose “Properties” and navigate to the “Device Manager” and see if
your USB Network Adapter is listed without any errors. If an error is
indicated, contact Belkin Technical Support.
3
4
5
6
Link LED is blinking slowly; I cannot connect to a wireless network or the
Internet.
If your Adapter appears to be functioning properly, but you cannot connect to
a network or you have a red wireless icon at the bottom of your screen, the
problem may be that there is a mismatch between the network name (SSID)
settings in your wireless network properties.
Check the SSID settings to see if they match. The SSID is case-sensitive and
the spelling on each computer must be exactly the same in order for the
Adapter to connect to the wireless router (or access point).
Note: To check the SSID settings or look for an available network, double-
click the Signal Indicator icon to bring up the “Wireless Networks” screen.
Click “Add” if you do not see the network you are trying to connect to and
type in the SSID.
For more information about setting up an SSID, please reference your router
manufacturer’s user manual. If issues persist even at close range, please
contact Belkin Technical Support.
Double N+ Wireless USB Adapter
42
TROUBLESHOOTING
Table of Contents
SECTION
1
2
Link LED is solid but I cannot connect to the Internet.
If you have a signal but can’t get online or obtain an IP address, the problem
may be that there is a mismatch between the encryption key settings in your
computer and wireless router (or access point). Check the WEP, WPA, or WPA2
key settings to see if they match. The key is case-sensitive and the spelling
on each computer and wireless router (or access point) must be exactly the
same in order for the Adapter to connect to the router. For more information
about encryption, please see “Securing your Wi-Fi Network” on page 27 of this
User Manual.
If issues persist even at close range, please contact Belkin Technical
Support.
3
4
5
6
Data transfer is sometimes slow.
Wireless technology is radio-based, which means connectivity and the
throughput performance between devices decreases when the distance between
devices increases. Other factors that will cause signal degradation (metal is
generally the worst culprit) are obstructions such as walls and metal
appliances. As a result, the typical indoor range of your wireless devices
will be between 100 to 200 feet. Note also that connection speed may decrease
as you move farther from the wireless router (or access point).
In order to determine if wireless issues are related to range, we suggest
temporarily moving the computer, if possible, to five to 10 feet away from the
wireless router (or access point). Please see the section titled “Placement of
your Wireless Networking Hardware for Optimal Performance” on page 2 of this
User Manual. If issues persist even at close range, please contact Belkin
Technical Support.
Double N+ Wireless USB Adapter
43
TROUBLESHOOTING
Table of Contents
SECTION
1
2
Signal strength is poor.
Wireless technology is radio-based, which means connectivity and the
throughput performance between devices decreases when the distance between
devices increases. Other factors that will cause signal degradation (metal is
generally the worst culprit) are obstructions such as walls and metal
appliances. As a result, the typical indoor range of your wireless devices
will be between 100 to 200 feet. Note also that connection speed may decrease
as you move farther from the wireless router (or access point). In order to
determine if wireless issues are related to range, we suggest temporarily
moving the computer, if possible, to five to 10 feet away from wireless router
(or access point).
Changing the wireless channel Depending on local wireless traffic and
interference, switching the wireless channel of your network can improve
performance and reliability. The default channel the router is shipped with is
channel 6. You may choose from several other channels depending on your
region; see your router’s (or access point’s) user manual for instructions on
how to choose other channels.
3
4
5
6
Limiting the wireless transmit rate Limiting the wireless transmit rate can help improve the maximum wireless range, and connection stability. Most wireless cards have the ability to limit the transmission rate. To change this property, go to the Windows Control Panel, open “Network Connections” and double-click on your Adapter’s connection. In the “Properties” dialog, select the “Configure” button on the “General” tab (Windows 98 users will have to select the USB Network Adapter in the list box and then click “Properties”), then choose the “Advanced” tab and select the rate property. Wireless client cards are usually set to automatically adjust the wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless signal is too weak; as a rule, slower transmission rates are more stable. Experiment with different connection rates until you find the best one for your environment; note that all available transmission rates should be acceptable for browsing the Internet. For more assistance, see your wireless card’s literature. If issues persist even at close range, please contact Belkin Technical Support.
Double N+ Wireless USB Adapter
44
TROUBLESHOOTING
Table of Contents
SECTION
1
2
Why are there two wireless utilities in my system tray?
Which one do I use?
There are several features and advantages from using the Belkin Wireless
Networking Utility over the Windows XP Wireless Zero Configuration utility. We
offer a site survey, detailed link information, and adapter diagnosis, to name
a few.
It’s essential to know which utility is managing your Adapter. We recommend
using the Belkin Wireless Networking Utility. To use the Belkin Wireless
Networking Utility, follow the steps below:
Step 1 Right-click on the network status icon in the system tray and select
the “Status” tab.
Step 2 From the “Status” tab, uncheck the “Use Windows to configure my
wireless network settings” box. Once the box is unchecked, click the “Close”
button to close the window.
You are now using the Belkin Wireless Networking Utility to configure the
Adapter.
The Adapter does not perform or connection is unstable when computer has a
second built-in wireless network card (such as a mini PCI or Intel®
CentrinoTM).
This condition occurs if your computer has a built-in wireless card while your
Belkin Double N+ Wireless USB Adapter is also active. This happens because
Windows must now handle two active wireless connections.
You must disable the built-in wireless card from your computer under “Network
Adapters” in the Device Manager.
3
4
5
6
The Adapter does not perform or connection is slow when computer has a built-
in wired Ethernet card.
This condition occurs if your computer has an active Ethernet card while your
Adapter is also active. This happens because Windows must now handle two
active network connections. You must disable the Ethernet card from your
computer under “Network Adapters” in the Device Manager.
What’s the difference between 802.11g and 802.11n?
Currently there are three commonly used wireless networking standards, which
transmit data at very different maximum speeds. Each is based on the
designation for certifying network standards. The most common wireless
networking standard, 802.11g, can transmit information up to 54Mbps; 802.11a
also supports up to 54Mbps, but in the 5GHz frequency; and 802.11n
specification can connect at up to 300Mbps. See the following chart for more
detailed information.
Double N+ Wireless USB Adapter
45
TROUBLESHOOTING
Table of Contents
SECTION
1
2
3
4
5
6
Belkin Wireless Comparison Chart
Data Rate* Technology
Wireless
G (802.11g)
N150
N300/N+
Double N+
(802.11n with MIMO) (802.11n with MIMO)
Speed/
Frequency
Up to 54Mbps Up to 150Mbps Up to 300Mbps Up to 300Mbps
Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz
Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz
Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz
Common household devices such as cordless phones and microwave ovens may interfere with the unlicensed band 2.4GHz
Compatible with 802.11b/g
Compatible with 802.11b/g
Compatible with 802.11n and 802.11b/g
Compatible with 802.11n and 802.11a/b/g
Advantage Coverage* Compatibility
Up to 400 ft.*
Up to 1,000 ft. Up to 1,200 ft. Up to 1,200 ft.*
Common– widespread use for Internet sharing
Better coverage and consistent speed and range
Enhanced speed and coverage
Leading edge– best coverage and throughput
*Distance and connection speeds will vary depending on your networking environment.
Double N+ Wireless USB Adapter
46
TROUBLESHOOTING
Table of Contents
SECTION
1
2
3
Technical Support
You can find technical-support information on our website, www.belkin. com, by
navigating to the tech-support section.
If you want to contact technical support by phone, please call the number you
need from the list below:
Local rates apply.
COUNTRY
AUSTRIA
BELGIUM
CZECH REPUBLIC DENMARK FINLAND FRANCE GERMANY GREECE HUNGARY ICELAND IRELAND
ITALY LUXEMBOURG NETHERLANDS NORWAY POLAND PORTUGAL RUSSIA SOUTH AFRICA SPAIN
SWEDEN
SWITZERLAND
UNITED KINGDOM
OTHER COUNTRIES
Double N+ Wireless USB Adapter
47
4
5
6
NUMBER
0820 200766
07 07 00 073
239 000 406 701 22 403 0972519123 08 – 25 54 00 26 0180 – 500 57 09 00800 – 44
14 23 90 06 – 17 77 49 06 800 8534 0818 55 50 06 02 – 69 43 02 51 34 20 80 85
60 0900 – 040 07 90 0.10 per minute 81 50 0287 00800 – 441 17 37 707 200 676
495 580 9541 0800 – 99 15 21 902 – 02 43 66 07 – 71 40 04 53
08 – 48 00 02 19
0845 – 607 77 87
+44 – 1933 35 20 00
INTERNET ADRESS
www.belkin.com/de/networking/ www.belkin.com/nl/networking/
www.belkin.com/fr/networking/ www.belkin.com/uk/networking/
www.belkin.com/uk/networking/ www.belkin.com/uk/networking/
www.belkin.com/fr/networking/ www.belkin.com/de/networking/
www.belkin.com/uk/networking/ www.belkin.com/uk/networking/
www.belkin.com/uk/networking/ www.belkin.com/uk/networking/
www.belkin.com/it/networking/ www.belkin.com/uk/networking/
www.belkin.com/nl/networking/ www.belkin.com/uk/networking/
www.belkin.com/uk/networking/ www.belkin.com/uk/networking/
www.belkin.com/networking/ www.belkin.com/uk/networking/
www.belkin.com/es/networking/ www.belkin.com/uk/networking/
www.belkin.com/de/networking/ www.belkin.com/fr/networking/
www.belkin.com/uk/networking/
INFORMATION
Table of Contents
SECTION
1
2
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220,
declare under our sole responsibility that the product, F6D6050 v1, to which
this declaration relates, complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Exposure to Radio Frequency Radiation.
The radiated output power of this device is far below the FCC radio frequency
exposure limits. Nevertheless, the device shall be used in such a manner that
the potential for human contact during normal operation is minimized. When
connecting an external antenna to the device, the antenna shall be placed in
such a manner to minimize the potential for human contact during normal
operation. In order to avoid the possibility of exceeding the FCC radio
frequency exposure limits, human proximity to the antenna shall not be less
than 20cm (8 inches) during normal operation.
3
4
5
6
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the distance between the equipment and the receiver.
· Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
Double N+ Wireless USB Adapter
48
INFORMATION
Table of Contents
SECTION
1
2
IMPORTANT NOTE: Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. To maintain compliance
with FCC RF exposure compliance requirements, please follow operation
instructions as documented in this manual.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
SAR compliance has been established in typical laptop computer(s) with USB
slots, and this product could be used in typical laptop computers with USB
slots. Other applications, such as handheld PCs or similar devices, have not
been verified and may not comply with related RF exposure rules and such use
shall be prohibited.
The availability of some specific channels and/or operational frequency bands
is country-dependent and firmware is programmed at the factory to match the
intended destination. The firmware setting is not accessible by the end user
3
4
5
6
Modifications The FCC requires the user to be notified that any changes or
modifications to this device that are not expressly approved by Belkin
International, Inc., may void the user’s authority to operate the equipment.
Industry Canada Statement This device complies with RSS-210 of the Industry
Canada Rules. Operation is subject to the following two conditions: 1) This
device may not cause interference, and 2) This device must accept any
interference, including interference
that may cause undesired operation of the device.
IMPORTANT NOTE: IC Radiation Exposure Statement This equipment complies with
IC radiation exposure limits set forth for an uncontrolled environment. End
users must follow the specific operating instructions for satisfying RF
exposure compliance. To maintain compliance with IC RF exposure compliance
requirements, please follow operation instructions as documented in this
manual.
Double N+ Wireless USB Adapter
49
INFORMATION
Table of Contents
SECTION
1
2
EU DECLARATION OF CONFORMITY
esky [Czech] Dansk [Danish] Deutsch [German] Eesti [Estonian] English
Español [Spanish] [Greek] Français [French] Italiano [Italian] Latviski
[Latvian] Lietuvi [Lithuanian] Nederlands [Dutch] Malti [Maltese] Magyar
[Hungarian] Polski [Polish] Português [Portuguese] Slovensko [Slovenian]
Slovensky
[Belkin Ltd] tímto prohlasuje, ze tento [F6D6050] je ve shod se základními pozadavky a dalsími p íslusnými ustanoveními sm rnice 1999/5/ES.
Undertegnede [Belkin Ltd] erklærer herved, at følgende udstyr [F6D6050] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Hiermit erklärt [Belkin Ltd], dass sich das Gerät [F6D6050] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Käesolevaga kinnitab [Belkin Ltd] seadme [F6D6050] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Hereby, [Belkin Ltd], declares that this product [F6D6050] is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Por medio de la presente [Belkin Ltd] declara que el [F6D6050] cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
[Belkin Ltd] [F6D6050]
1999/5/ .
Par la présente [Belkin Ltd] déclare que l’appareil [F6D6050] est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Con la presente [Belkin Ltd] dichiara che questo [F6D6050] è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Ar so [Belkin Ltd Belkin Ltd ] deklar , ka [F6D6050] / iek rtas tips] atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist tajiem noteikumiem.
Siuo [Belkin Ltd] deklaruoja, kad sis [F6D6050] atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Hierbij verklaart [Belkin Ltd] dat het toestel [F6D6050] in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, [Belkin Ltd], jiddikjara li dan [F6D6050] jikkonforma mal- ti ijiet
essenzjali u ma provvedimenti o rajn relevanti li hemm fid-Dirrettiva
1999/5/EC.
Alulírott, [Belkin Ltd] nyilatkozom, hogy a [F6D6050] megfelel a vonatkozó
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Niniejszym [Belkin Ltd] o wiadcza, e [F6D6050] jest zgodny z zasadniczymi
wymogami oraz pozosta ymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
[Belkin Ltd] declara que este [F6D6050] está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
[I Belkin Ltd] izjavlja, da je ta [F6D6050] v skladu z bistvenimi zahtevami in
ostalimi relevantnimi dolo ili direktive 1999/5/ES.
[Belkin Ltd] týmto vyhlasuje, ze [F6D6050] sp a základné poziadavky a vsetky
príslusné
3
4
5
6
[Slovak] Suomi [Finnish] Svenska [Swedish] Íslenska [Icelandic] Norsk [Norwegian]
ustanovenia Smernice 1999/5/ES.
[Belkin Ltd] vakuuttaa täten että [F6D6050] tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Härmed intygar Belkin Ltd] att denna [F6D6050] står I överensstämmelse med de
väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av
direktiv 1999/5/EG.
Hér með lýsir [Belkin Ltd] yfir því að [F6D6050] er í samræmi við grunnkröfur
og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
[Belkin Ltd] erklærer herved at utstyret [F6D6050] er i samsvar med de
grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
For information on product disposal please refer to http://environmental.belkin.com
FOR USE IN
AT BE CY CZ DK EE FI FR DE GR HU IE
IT LV LT LU MT NL PL PT SK SI ES SE GB IS LI
NO CH BG RO TR
OPERATES ON CHANNELS 1-13
Restricted Use in Certain Countries
Class 2 Equipment
Double N+ Wireless USB Adapter
50
INFORMATION
Table of Contents
SECTION
1
2
3
4
5
6
Belkin International, Inc., Limited Lifetime Product Warranty
What this warranty covers. Belkin International, Inc. (“Belkin”) warrants to
the original purchaser of this Belkin product that the product shall be free
of defects in design, assembly, material, or workmanship.
What the period of coverage is. Belkin warrants the Belkin product for the
lifetime of the product.
What will we do to correct problems? Product Warranty. Belkin will repair or
replace, at its option, any defective product free of charge (except for
shipping charges for the product). Belkin reserves the right to discontinue
any of its products without notice, and disclaims any limited warranty to
repair or replace any such discontinued products. In the event that Belkin is
unable to repair or replace the product (for example, because it has been
discontinued), Belkin will offer either a refund or a credit toward the
purchase of another product from Belkin.com in an amount equal to the purchase
price of the product as evidenced on the original purchase receipt as
discounted by its natural use.
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided
to Belkin for inspection upon Belkin’s request at the sole expense of the
purchaser, or if Belkin determines that the Belkin product has been improperly
installed, altered in any way, or tampered with. The Belkin Product Warranty
does not protect against acts of God such as flood, earthquake, lightning,
war, vandalism, theft, normal-use wear and tear, erosion, depletion,
obsolescence, abuse, damage due to low voltage disturbances (i.e. brownouts or
sags), nonauthorized program, or system equipment modification or alteration.
How to get service.
To get service for your Belkin product you must take the following steps:
1. Contact Belkin Tech Support at the number listed on page 47, within 15
days of the Occurrence. Be prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2. Your Belkin Customer Service Representative will then instruct you on how
to forward your receipt and Belkin product and how to proceed with your claim.
Double N+ Wireless USB Adapter
51
INFORMATION
Table of Contents
SECTION
1
2
Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the equipment to and from such repair facility and of such estimate shall be borne solely by the purchaser. Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have.
3
4
5
6
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER
WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE
IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN
DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so
the above limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT, INDIRECT,
CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO, LOST BUSINESS
OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have other
rights, which may vary from state to state. Some states do not allow the
exclusion or limitation of incidental, consequential, or other damages, so the
above limitations may not apply to you.
Double N+ Wireless USB Adapter
52
Belkin Ltd. Express Business Park Shipton Way, Rushden NN10 6GL, United
Kingdom
Belkin Iberia C/ Anabel Segura, 10 planta baja, Of. 2 28108, Alcobendas,
Madrid Spain
Belkin SAS 130 rue de Silly 92100 Boulogne-Billancourt, France
Belkin Italy & Greece Via Carducci, 7 Milano 20123 Italy
Belkin GmbH Hanebergstrasse 2 80637 Munich Germany
Belkin B.V. Boeing Avenue 333 1119 PH Schiphol-Rijk, Netherlands
© 2009 Belkin International, Inc. All rights reserved. All trade names are
registered trademarks of respective manufacturers listed. Windows and Windows
Vista are either registered trademarks or trademarks of Microsoft Corporation
in the United States and/or other countries.
8820ea00268 F6D6050ea
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>