ELECROW Crowiew FHD Mechanical Clamping Display User Manual

ELECROW Crowiew FHD Mechanical Clamping Display

Product Information

Meeting users’ demand for an extension of the visual workspace and improving work efficiency, CrowView, developed by Elecrow, comes out after research and testing. It is equipped with a 14-inch FHD display with a lightweight and portable design. It is compatible with multiple devices or game consoles and supports use as a secondary display for 13~16.5 inch laptops. It supports full-featured USB-C port signal input and is also compatible with HDMI. For more information, please visit www.elecrow.com

Product Usage Instructions

Part List

• Telescopic Snap
• Detachable Clip
• Clamp Clasp
• Lower Buckle

Thanks for purchasing Elecrow product. Please check that the following items are complete when opening the box. Please do not use non-standard accessories to ensure safety and the product’s lifespan. Any damage or injury caused by the use of non-standard accessories is not covered by the warranty.

Buttons and Interfaces

• Mini HDMI

• USB-C (Full-featured)

• Headphone Jack

• Status Lamp

• Exit

• Down

• Up

• Menu

• Support Feet

• Status Lamp description:
  

  • Green light: normal operating;
  • Flashing red light: power on, no signal input;
  • Solid red light: sleep mode.

• Press the support feet button to extend and stabilize the foot, supporting the computer screen.

• The inward flipping angle should not be too small, otherwise it may cause damage.

Display Setting

1. Please take out the Elecrow product and unfold it.
2. Lift up the right clamp clasp, adjust the telescopic snap to the appropriate size, and clip it onto the notebook.
3. Press the support feet button to extend and stabilize.
4. Use a suitable cable to connect CrowView to your laptop. (For specific connection, please see the next page Connection Method.)

After assembly, please adjust the alignment of the screens on both sides. Laptops larger than 8mm thick may cause clip damage.

Connection Method
Suitable for PCs with Full-featured interface (USB 3.1) Suitable for computer equipment with HDMI interface or insufficient power supply

Placement Method

• Right clamping
• Left clamping
• Face-to-face
• Place upright
• Place separately
• Storage status

It is recommended that CrowView clamp it on the right side of the computer, and the support frame is used for better results.

PRODUCT BRIEF
Meeting users’ demand for an extension of the visual work-space and improving work efficiency, CrowView, developed by Elecrow, comes out after research and testing.

• Equipped with 14 inch FHD display
• Lightweight and portable design.
• Compatible with multiple devices or game consoles. Supports use as a secondary display for 13~16.5 inch laptops.
• Supports full-featured USB-C port signal input.
• Compatible with HDMI.
• For more information, please visit www.elecrow.com.

PART LIST

Thanks for purchasing Elecrow product. Please check that the following items are complete when opening the box.

Please do not use non-standard accessories to ensure safety and the product’s lifespan. Any damage or injury caused by the use of non-standard accessories is not covered by the warranty.

• The Detachable Clip is installed on the product in advance.
• The wireframe drawing is for reference only, please refer to the actual product in the box.
• Product specifications or manuals are subject to change without notice.

PARTS DESCRIPTION

1. The telescopic snap can flexibly adjust the clamping width.
2. To disassemble the clip, press the left and right buckles and pull out. When installing, make sure to push it firmly into place.
3. The right clamp clasp needs to be turned up when in use and inward when not in use.
4. Attach the clip to the lower buckle to position the screen on the left side of the computer.

BUTTONS AND INTERFACES

• Status Lamp description:
  

  • Green light: normal operating;
  • Flashing red light: power on, no signal input;
  • Solid red light: sleep mode.

• Press the support feet button to extend and stabilize the foot, supporting the computer screen.

• The inward flipping angle should not be too small, otherwise it may cause damage.

DISPLAY SETTING

1. Please take out the Elecrow product and unfold it.
2. Lift up the right clamp clasp, adjust the telescopic snap to the appropriate size, and clip it onto the notebook.
3. Press the support feet button to extend and stabilize.
4. Use a suitable cable to connect CrowView to your laptop. ( For specific connection, please see the next page “Connection Method”.)

After assembly, please adjust the alignment of the screens on both sides. Laptops larger than 8mm thick may cause clip damage.

CONNECTION METHOD

• Suitable for PCs with Full-featured interface (USB 3.1) Suitable for computer equipment with HDMI interface or insufficient power supply

PLACEMENT METHOD

It is recommended that CrowView clamp it on the right side of the computer, and the support frame is used for better results.

PC SETTINGS

WINDOWS

1. Enter the display settings
2. You can drag the screen to rearrange it alone.
3. If you need to set different display modes for multiple screens, please click 1/2 (click ”  at the bottom of the screen to recognize the corresponding screen) After selecting the corresponding monitor, go to the “Multi-display Settings” menu to set accordingly. (Copy: same screen display; Extension: Extended Display)
4. If the screen is inverted, click the screen, find “Display Orientation” in “Zoom & Local”, and adjust it in the drop-down menu. To enlarge the screen, adjust it from the drop-down menu in the “Change the size of text, apps, etc.” option.

PC SETTINGS

MAC

1. Open System Preferences.
2. Select “Display” in the menu bar.
3. Click the screen to drag to adjust the position.
4. Click the screen, enter the monitor settings page, select “Main Display”, the selected screen is used as the main display, and the unselected screen is used as the extended display; Select “Extended Display”, the selected screen is used as the extended monitor, and the screen is not selected as the primary display; Select
   “Mirroring of RTK FHD HD” to display both screens on the same screen .

MENU BUTTON FUNCTIONS

1. Short press the “ ” button to enter the menu setting interface.
2. Short press the “+” button to enter the corresponding setting options.
3. Short press the “ ” button to confirm.
4. Short press the ” ” button to return to the previous level.
5. “+” sets shortcut keys for entering brightness, which can adjust brightness.
6. Press and hold the “Back” button for 3 seconds to trigger the shutdown and startup functions.
7. “-“sets shortcut keys for entering brightness, which can adjust brightness.

BRIGHTNESS

• BRIGHTNESS : Adjustable range: 0-100
• CONTRAST : Adjustable range: 0-100
• ECO :STANDARD/RTS/FPS/MOVIE/GAME/TEXT
• DCR : OFF/ON
• SHARPNESS : Adjustable range: 0-4
• HUE : Adjustable range: 0-100
• SATURATION : Adjustable range: 0-100
• BRIGHTNESS : Adjustable range: 0-100

COLOR TEMP

• COLOR TEMP : sRGB/USER/WARM/COOL (RGB can only be adjusted in USER mode.)
• RED : Adjustable range: 0-100
• GREEN : Adjustable range: 0-100
• BLUE : Adjustable range: 0-100

OSD SETTINGD LANGUAGE:

• Available languages :English, French, German, Chinese, Italian, Spanish, Portuguese, Turkish, Polish, Dutch, Japanese, Korean
• OSD H. POS : Adjustable range: 0-100
• OSD V.POS : Adjustable range: 0-100
• OSD TIMER : Adjustable range: 10-60
• TRANCPARENCY : Adjustable range: 0-100
• RESET : All settings will go to factory settings.

MISC

• ASPECT : WIDE/4: 3
• FREESYNC : OFF/ON
• OD : OFF/ON
• AUTO POWERDOWN : OFF/10/20/30/40 /50/60/120/240
• CLONE : OFF

SIGNAL SOURCE

• D0 : TYPE C/D1: TYPE C/D2:
• DONE LOW BLUE LIGHT : 0-4
• VOLUME : Adjustable range: 0-100
• MUTE : OFF/ON

PARAMETERS

Fit size

| Laptop models 13″~ 16.5″ Telescopic thickness 4-8mm Telescopic length 280~400mm
Size| 355x217x21mm (Folded State)
Weight| 800g

References

• Elecrow: PCB Prototype & Open Hardware For Makers

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>