ELECROW ESP32 Crow Panel Display Making Easier User Manual
- June 1, 2024
- ELECROW
Table of Contents
ELECROW ESP32 Crow Panel Display Making Easier
Specifications:
- Size: 2.4″, 2.8″, 3.5″, 4.3″, 5.0″, 7.0″
- Resolution: Varies based on size
- Touch Type: Resistive Touch or Capacitive Touch
- Main Processor: Varies based on model
- Frequency: 240 MHz
- Flash: 4MB
- SRAM: 512KB
- ROM: 384KB – 448KB
- PSRAM: Varies based on model
- Display Driver: ILI9341V, ILI9488, NV3047, ILI6122 & ILI5960, EK9716BD3 & EK73002ACGB
- Screen Type: TFT
- Interface: Varies based on size and model
- Speaker Jack: Yes
- TF Card Slot: Yes
- Active Area: Varies based on size
Product Usage Instructions
Screen Buttons and Interfaces:
Each model comes with specific interfaces and buttons. Refer to the silk screen labels on the actual product for accurate identification.
Powering On the Device:
Connect the device to a power source using the provided USB-A to Type-C cable. Press the power button to turn on the display.
Touch Functionality:
If your model comes with a resistive touch pen, use it to interact with the screen. For capacitive touch models, simply use your fingers to navigate.
Troubleshooting:
If you encounter any issues such as flickering or unclear display, stop using the device and seek professional repair services. Do not attempt to repair internal components yourself.
Frequently Asked Questions
Q: Do all models come with a resistive touch pen?
A: No, only specific models come with a resistive touch pen. Refer to the package list to confirm if your model includes one.
Q: How do I know which interfaces and buttons are available on my specific model?
A: The interfaces and buttons are silk screen labeled on the actual product. Use these labels as a reference for your model.
Thank you for purchasing our product.
Please read this user manual carefully before use and keep it properly for
future reference.
Package List
The following list diagram is for reference only.
Please refer to the actual product inside the package for details.
Screen Buttons and Interfaces
Screen appearance varies by model, and diagrams are for reference only. Interfaces and buttons are silk screen labeled, use actual product as reference.
ESP32 Display 2.4 Inch
ESP32 Display 2.8 Inch
ESP32 Display 3.5 Inch
ESP32 Display 4.3 Inch
ESP32 Display 5.0 Inch
ESP32 Display 7.0 Inch
Parameters
Expansion Resources
- Schematic Diagram
- Source Code
- ESP32 Module Datasheet
- Arduino Libraries
- 16 learning Lessons for LVGL
- LVGL Reference
Safety Instructions
To ensure safe use and avoid injury or property damage to yourself and others, please follow the safety instructions below.
- Avoid exposing the screen to sunlight or strong light sources to prevent affecting its viewing effect and lifespan.
- Avoid pressing or shaking the screen hard during use to prevent loosening of internal connections and components.
- For screen malfunctions, such as flickering, color distortion, or unclear display, stop use and seek professional repair.
- Before repairing or replacing any equipment components, make sure to turn off the power and disconnect from the device.
Company Name: Elecrow Technology Development Co., Ltd.
Company address: No.4832 Ba’an Avenue, Bao’an District, Shenzhen City Company
website: https://www.elecrow.com
Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>