ELECROW Crowpi-L Raspberry Pi Laptop User Manual

ELECROW Crowpi-L Raspberry Pi Laptop

IMPORTANT SAFETY WARNING!

• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
• Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• WARNING: Use the detachable supply unit provided with this appliance only.

Product Introduction

CrowPi-L is a lite version born out of CrowPi2, “L” stands for Lite, Light, and Laptop. This is a real Raspberry Pi computer. We collected a lot of opinions from CrowPi users and Raspberry Pi enthusiasts, focusing on solving many inconveniences of using Raspberry Pi DIV laptops, such as installing Raspberry Pi, switching systems, heat dissipation, expanding screens, etc. Better yet, we still retain the highlights of the CrowPi series, a built-in course system. Users will have a new experience brought by Crowpi-L.

Main features

1. 11.6-inch 1366• 768 IPS screen, sleek body made out of environmentally-friendly material, portable and delicate.
2. Come with a keyboard and touchpad, which are the assistant for using Raspberry Pi.
3. Built-in fan and air circulation cooling system designed to protect the smooth operation of the Raspberry Pi system.
4. 40-pin expansion Raspberry Pi pin, allows users to connect the onboard sensor or output independently, which can help build Raspberry Pi projects faster and enables more creative usage.
5. 2 megapixels camera which is integrated with a microphone, and also equipped with stereo output speakers.
6. The Type-c interface supports 9-20V wide voltage input, and a built-in 5000 mAh battery, which supports the device to work independently for more than three hours, and the software synchronously displays the battery power status.
7. The HDMI expansion port can be used to connect an external monitor, and the audio expansion port allows headphones or speakers to be connected.
8. Equipped with self-developed learning software, customized UI that is more suitable for traditional computer users, making software and hardware programming learning easier and more convenient.
9. Unique dual system switching function and extended storage function.

Main parameters

• A. Structure

• B. Conventional accessories

How to use

Install Raspberry Pi and boot

1. Install magnets for Raspberry Pi which will be installed in the laptop.
   After the installation is complete:

2. Insert the 2-in-l TF card adapter board into the TF card slot on the back of the Raspberry Pi

3. Open magnetic protection cover of Raspberry Pi

4. Install HDMI expansion board

5. Insert one end of the 4-pin cable into the socket of the USB expansion board, the other one inserts into the socket on the HDMI expansion board.

6. Put the assembled raspberry pi into the raspberry pi storage compartment, there is a magnetic base at the bottom of the compartment to fix the Raspberry Pi, Then press the GPIO adapter board with fan from top to bottom to connect the 40 pins on both sides.

7. Take out the 12V/2A type-c power adapter and insert it into the right type-c interface.

8. Press the power button at the top of the keyboard to start using.

• Use of Power
  Use the 1 2V power supply in the accessories and insert the type-c connector into the DCl 2V power supply port.

• Use of camera and microphone
  Connect camera and microphone via USB, if there is abnormal, you need to first check whether the USB adapter is properly connected in the fifth step of the “Raspberry Pi Installation and Booting” operation guide.

• Use of wireless mouse

1. Take out the wireless receiver in the mouse compartment.
2. Insert the receiver into the USB port of the Raspberry Pi.
3. Turn on the power of the mouse to start normal use (Note: Your operation should follow the order above, don’t turn on the power first).

• Use of touchpad
  When CrowPi-L is working normally, press FN+F1 to unlock the touchpad for normal use, and press FN+F1 again to disable the touchpad function.

• Connect to the network
  Insert the network cable into the network port of the Raspberry Pi or turn on the wireless network switch to connect to the wireless network.

• Screen brightness adjustment
  When CrowPi-L is working normally, press F9 to decrease the brightness and press F1 to increase the brightness.

• Charging and battery
  When using the type-c power supply, the battery can be charged. It takes 3 hours to fully charge the battery when it is not working. After being fully charged, it can support the device to work continuously for 3 hours.

• Dual system switch
  The self-developed dual-system switching adapter board allows two TF cards to be inserted at the same time, and users can quickly switch the system through the switch on the switching board (Note: Switch operation needs to do when the machine is turned off, and turned on the laptop after switching successfully).

• Support external storage
  The product provides an independent memory card interface, and users can connect an external memory card to expand the memory capacity.

• Use of expansion screen
  CrowPi-L has set aside a standard HDMI interface for customers to use the expansion screen. (Note: Affected by the Raspberry Pi 48 hardware, the expansion screen needs to be connected to the HOM/ cable and screen before the Raspberry Pi is turned on, and the expansion screen can be used normally after turning on the device.)

• Use of headphones/speaker
  Compatible with headphones or speakers with a 3.5mm interface

• Use of GPIO port
  We specially designed the GPIO port adapter board for CrowPi-L. After the user plugs in the adapter board, the Crowtail series sensor can be connected externally, and users can learn software and hardware knowledge through our tutorials.

Connection steps:

• Step 1. Connect the cable to the shield board
• Step 2. Insert the other end of the cable into the GPIO slot on the side of the laptop

FAQs

1. Unable to boot
   Make sure you are using the correct charger and you inserted the SD card into the Raspberry Pi

2. The wireless mouse cannot be used
   Please ensure that the battery is sufficient and that the wireless receiver has been inserted into the USB port of the Raspberry Pi

3. The touchpad cannot be used
   Please confirm that the touch function (keyboard touch function switch: FN+F1) is turned on

4. The screen is black and freezes
   Please check whether the high-current peripherals were mounted and led to the insufficient power supply. It may also be due to standby caused by long periods of non-use, use of a touchpad or keyboard to wake up

5. The camera and microphone do not work
   The USB adapter connection is unstable, please re-plug

6. Unable to connect to the network
   Please turn on the wireless network or connect to the Raspberry Pi Ethernet port.

Precautions

• Do not use it in humid environment
• Do not use an unsuitable power supply for our device
• Do not charge the battery for a long time
• Keep away from fire
• Do not bend the screen

Specifications

Customer Service

If you have any questions, customer support always stands by.

• 12-Month Limited Warranty
• Lifetime Technical Support
• techsupport@elecrow.com
• +86 0755-23204330

lnformationon the disposal for Waste Electrical & Electronic Equipment(WEEE). This symbol on the products and accompanying documents mean that used electrical and electronic products should not be mixed with general household waste. For proper disposal for treatment, recovery, and recycling, please take these products to designated collection points where they will be accepted on a free-of-charge basis. In some countries, you may be able to return your products to your local retailer upon the purchase of a new product. Disposing of this product correctly will help you save valuable resources and prevent any possible effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your near collection point for WEEE.

• Manufacturer: Shenzhen Elecrow Technology Development Co., Ltd.
• Address: 5F, Fengze Building B, Nanchang Huafeng Industrial Park, Baoan District, Shenzhen, China,
• Online support: www.elecrowcom.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>