GOLDEN LIGHTING 0314-1W BLK-CLR Remy 9 Tall Bathroom Sconce Instruction Manual
- June 13, 2024
- GOLDEN LIGHTING
Table of Contents
GOLDEN LIGHTING 0314-1W BLK-CLR Remy 9 Tall Bathroom Sconce
Product Information
The product is a lighting fixture manufactured by Golden Lighting. It is available in multiple models, including pendants, linear pendants, and chandeliers. The fixture is designed to enhance the look of your home and provide both task and ambient lighting. It can be installed in various areas, such as above a kitchen island, above a dining room table, or in open areas.
Product Usage Instructions
Pendants & Linear Pendants Above a Kitchen Island
To install a linear pendant over the kitchen island, center it over the
island. If you are hanging pendants, use one pendant for every 24 inches of
the island. The fixtures should hang at least 30 inches above the countertop.
Pendants & Chandeliers Above a Dining Room Table
To install fixtures above a dining room table, they should be positioned at
least 30 inches above the table. Use a fixture that is 12 inches narrower than
the width of the table.
Pendants and Chandeliers in Open Areas
When installing pendants and chandeliers in open areas, ensure that the
bottom of the fixture hangs at least 7.5 feet from the floor. Leave enough
clearance for any opening doors. To ensure the best lighting in your space, it
is recommended to layer your lighting by using coordinating fixtures like
sconces, flush mounts, and pendants. Install the lights with dimmers to
control the level of light output at any given moment. For additional
information, browse Golden Lighting’s website for coordinating lights and
expert lighting advice.
Note: This response is based on the provided text extract and may require
further clarification or information from the complete user manual.
We appreciate your business and hope you love your new light!
Great lighting can add value and enhance the look of your home. To ensure the
best lighting in your space, remember to layer your lighting. This ensures
that your space will have both task and ambient lighting. Coordinating
fixtures like sconces, flush mounts, and pendants can help you meet your
layered lighting needs and reinforce your desired aesthetic. Install the
lights with dimmers that allow you to control the level of light output at any
given moment. Get function and style! Browse our site for coordinating lights
and expert lighting advice. To help create the perfect look, visit
www.GoldenLighting.com.
Love your light and want to show it off?
Follow us, share a picture, and tag us on Social…
How to Identify the Fixture’s Wires
Hot: Smooth, Black, or Transparent with Black Inner Thread
Neutral: Ribbed, White or Transparent with White Inner Thread
Ground: Copper, Bare Metal, Green, or Transparent Inner Thread
Get help, quick tips, and explore curated content
For Customer Service, contact the place of purchase to arrange for replacement
parts.
IMPORTANT:
- All installation work should be done by accredited professional.
- Shut off power supply at fuse or circuit breaker!
- Use only the specified bulbs. Do not exceed the maximum wattage!
Assembly Instructions
PREPARING FOR INSTALLATION
Carefully remove the new fixture from the carton as well as the yellow bag
that holds all of the parts. See the important notes above. Shut off power at
the circuit breaker and remove old fixture from wall, including the old
mounting strap. 1. From the parts bag remove the mounting strap (A) assembly.
Mounting strap (A) contains several pairs of threaded holes. Find the pair of
holes that matches the spacing of the holes on the junction box and your
fixture’s backplate. Two sets of mounting screws (B & C) should be attached to
mounting strap (A). Place mounting strap (A) over the junction box and secure
mounting strap (A) to the junction box using mounting screws (B) and a
screwdriver. Tighten the screws securely. Pull house wires through the center
of the mounting strap (A).
ASSEMBLING THE FIXTURE
No Assembly Required – This item arrives assembled and ready for installation.
Please proceed to the next step.
CONNECTING THE WIRES
Have an assistant support the fixture’s weight while completing the wiring.
Refer to the wiring diagram and attach the fixture’s wires to the power supply
wires from the junction box. Attach the fixture’s wires to the power supply
wires from the junction box. Connect Hot to Hot (transparent wire with black
inner thread, black, or smooth wire) Neutral to Neutral (transparent wire with
white inner thread, white, or ribbed wire), and Ground to Ground (transparent
wire with green inner thread, green wire, or copper). Twist the ends of the
wire pairs together, and then twist on a wire connector. Make sure all twists
are in the same direction. If there is no house ground wire coming from the
junction box, locate ground screw (E) on the mounting bracket/mounting strap
and wrap the fixture’s ground wire around the ground screw. Use a screwdriver
to tighten the top of ground screw (E) onto the wires and into the mounting
bracket/mounting strap. Tuck the wires into the junction box.
FINISHING THE INSTALLATION
Place the fixture backplate (D) over mounting strap (A). Align the holes in
backplate (D) with the holes found on mounting strap (A). Insert side screws
(C) into the holes found on backplate (D) and mounting strap (A). Tighten
screws until backplate (D) is secure to mounting strap (A) and the fixture is
snug against the wall. 4. Lift shade (H) up to socket (G) and into lamp cup
(F) and secure using socket ring (I). 5. Install light bulb (J) (not included)
to the socket in accordance with the fixture’s specifications. Do not exceed
the maximum recommended wattage. Your installation is complete. Turn on the
power and test the fixture.