V-TAC VT-10121 LED Garden Light Instruction Manual
- June 13, 2024
- V TAC
Table of Contents
V-TAC VT-10121 LED Garden Light
TECHNICAL DATA
| MODEL | VT-10121 |
|---|---|
| SKU | 23053 |
| LUMENS | 9800 Lm [@WIDE CONE] |
| POWER | 120W |
| INPUT VOLTAGE | AC: 220-240V, 50/60Hz |
| BEAM ANGLE | 100° |
| CRI | ≥80 |
| OPERATION TEMPERATURE | -20° C to +40° C |
| WIRE LENGTH (Outer Size) | 130 ±10mm |
| NET WEIGHT | 2.9Kg |
| MOUNTING HEIGHT | 5-8m |
| MAX. PROJECTED ARE | 30-40m2 |
| LIFE SPAN | 25,000 Hours |
| DIMENSION | 380x380x120mm |
INTRODUCTION
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Proper grounding should be ensured throughout the installation.
- Replace any cracked protective shield.
- Minimum distance from lighted objects 1m.
PARTS DIAGRAM
DIMENSIONS
| MODEL | VT-10121 |
|---|---|
| A(mm) | ∅380 |
| H(mm) | 120 |
| N.W(Kg) | 2.9 |
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTION
- Connect to 220-240V AC power grid, brown wire to wire, the blue line to zero, yellow green line to grounding wire.
- Set the lamp on a lamp pole with a diameter of ∅60mm.
- Use M8 screws to fix the lamp on the pole and lock it tight.
- Turn on the lamp
INSTALLATION CONDITIONS
- In a stent or analogues.
- In the mast (column) on the cantilever.
- The input and the output connection mode must need IP65 waterproof connector to connect (suitable for line 0.75MM square – 1.5MM square) .
- This series of street lamp belongs to outdoor lamps and lanterns, install indoor environment is only suitable for the air circulation, temperature range, no more than -20° to 40° C
NOTE:
- before installation, check the appearance of lamps and lanterns, guarantee without damage, the shape phenomenon.
- In the process of installation, maintenance, please pay attention to protecting the surface of lamps and lanterns, to ensure that all fittings fixation. Connected to the light pole lamp body, use screw locking, pay attention to the screw torque is less than 10.5 N.m
- In the process of maintenance, installation to ensure that the parts are intact. If there is any damage, defect should be another renewals.
- The power cord, the lamps and lanterns use for double insulated wire, such as wire breakage, please the professional qualification of the personnel to replace, so as not to send To danger;
- When used, lamps and lanterns surface has a certain temperature, is a normal phenomenon.
- Pay attention to the correctness of the power line connection, please don’t wrong . The power cord color corresponding relationship is as follows
| BROWN | BLUE | YELLOW GREEN |
|---|---|---|
| The phase line L | The zero line N | Ground wire |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>