inateck KB01103 Bluetooth Keyboard Case Instruction Manual
- June 13, 2024
- inateck
Table of Contents
inateck KB01103 Bluetooth Keyboard Case
Product Diagram
Bluetooth Pairing
- Step 1: For the first use, slide the power switch to the On position and then KB01103 will automatically enter Bluetooth Channel 1 pairing mode with a blinking blue indicator. To enter the Bluetooth pairing mode, you can also hold .When the Bluetooth indicator flashes blue, it means KB01103 is in Bluetooth Channel 1 pairing mode.
- Step 2: On your iPad or Windows devices, turn on Bluetooth and then “Inateck KB01103” will show up in available devices list.
- Step 3: Tap “Inateck KB01103” to pair it with your device and then the Bluetooth indicator will stay solid in blue. which means that Bluetooth pairing is completed.
Fix Bluetooth Pairing Problems
- Step 1: Go to Bluetooth page, find “Inateck KB01103” in paired devices list and delete the previous pairing record. If there are multiple pairing records, please delete them all.
- Step 2: Hold simultaneously for 3 seconds and then the three indicators will blink for 3 times once the factory reset is completed.
- Step 3: Turn off Bluetooth on your device and turn it back on. Then, pair it with your Inateck KB01103.
Shortcut Keys
Note: The following operations are only applicable to Windows.
-
How to Use F1-F12
You may press to lock the Fn key. (The keyboard disables the Fn key lock by default.) -
When the Fn Lock is enabled
Press F1 can trigger the functionality owned by F1 key; Press the combination of simultaneously will dim the brightness of the screen.
This method applies to all F Keys (F1-F12). -
When the Fn Lock is disabled (Default Status)
Press F1 can dim the brightness of the screen. Press the combination of simultaneously will trigger the functionality owned by F1 key.
The Combination of Fn and Other Keys
LED Indicator
Restore Factory Defaults
Hold for 3 seconds and then the three indicators will blink for 3 times once
the factory reset is completed.
Check Battery Level
Hold simultaneously to check the battery level according to the blinking
frequency of the red battery indicator.
Charging
When the battery level is under 20%, the red battery indicator will blink. You can connect the included USB cable to the charger of your cellphone or the USB port of a computer to recharge the keyboard for 2~3 hours. The red battery indicator will stay solid when the keyboard is charging. Once it’s fully charged, the green battery indicator will stay solid.
Sleep Mode
When KB01103 is left idle for 10 minutes, it will enter sleep mode and the
Bluetooth connection will be disrupted. The connection can be rebuilt with a
press of any key.
Product Specification
Packing List
- KB01103 *1
- Charging Cable *1
- Instruction Manual *1
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the Users, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment. The device has been
evaluated to meet general RF exposure requirement. This equipment complies
with FCC’s RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna(s) must not be co-located or
conjunction with any other antenna or transmitter.
EU Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive
2014/53/EU. A copy of the Declaration of Conformity can be accessed from
https://www.inateck.de/pages/euro-compliance.
Service Center
Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street,
Longgang District, Shenzhen, Guangdong, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>