AMERICAN LIGHTING RM2-5CCT 16 Watt LED 120V 2 Head Recessed Downlight Instruction Manual

120V RECESSED MULTIPLE LED Downlight
INSTALLATION INSTRUCTIONS
RM2 & RM3 Series

WARNING
These products may represent a possible shock or fire hazard if improperly installed or attached in any way. Products should be installed in accordance with these instructions, current electrical codes, and/or the current National Electric Code (NEC).
WARNING
The electrical rating of this product is 120V AC. The installer must determine whether power supply is appropriate at the luminaire before installation. Ensure power supply is turned off at the fuse boxor circuit breaker prior to attempting installation or servicing of the fixture.

SAFETY INFORMATION

• Read all instructions before beginning; save these instructions for future use.
• To reduce the risk of fire, electric shock, or injury to persons, pay close attention to this manual and stay within its guidelines when using this product.
• Installation of this fixture requires knowledge of recessed lighting luminaires and their electrical systems. If not qualified or uncertain, do not attempt installation; contact a qualified electrician.
• Supply conductors (power wiring) connecting the fixture must be rated for a minimum of 90°C (194°F).
• Do not make or alter any open holes in wiring enclosures, nor in any electrical components during installation.
• Do not alter, relocate, or remove wiring, lamp holders, power supply, or any other electrical component.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• This fixture is suitable for use in damp locations.
• To avoid electrical shock, do not turn on fixture with missing or damaged lens.
• There are no serviceable parts inside of the LED module.
• This fixture is suitable for use in dimming circuits: TRIAC/ELV

PRE-INSTALLATION:

1. Turn power OFF from the electrical panel before starting installation.
2. Run electrical wire from the switch (120V AC main line power) through the mounting hole using NMD90 Romex or BX cable.
   NOTE: This fixture has adjustable CCT (Correlated Color Temperature) operation. In order to change color temperatures, use the CCT slider switch on the back of the LED driver prior to installation.

WIRE THE FIXTURE (Figures 1-4):

1. Locate a suitable location for the fixture and trace the outline of the cut-out on the drywall or ceiling tile. See Table 1. Cut the mounting hole following the dimensions in Table 1.
2. Select the desired correlated color teamperature setting by adjusting the switch on the junction box. See Figure 1.
3. Using a wire nuts (included), bring line voltage wires and make connections to the junction box, being sure to match polarity. See Figure 1.
4. Connect the DC connections from the fixture to the driver. See Figure 2.
5. Push the driver through the mounting hole made in Step 1.
6. Lift the spring clamps located on the top of the fixture and slide the fixture into the mounting hole. See Figure 3.
7. Carefully release the spring clamps, securing the fixture to the edges of the mounting hole. See Figure 4.
8. Turn power back on.

TABLE 1

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

5-YEAR LIMITED PRODUCT WARRANTY

This product is warranted to be free from defects in material and workmanship for a period of five (5) years from the date of purchase. Products that prove to be defective during this period will be either repaired (i.e. replacement of defective electronics, defective parts of the fixture housing, lens, wiring, switching or lamp sockets; excluding the lamp) or replaced, at the discretion of American Lighting, Inc claims for defective products must be submitted to the retail location from which the product was purchased withing the warranty period. Upon submission of proper return claim documentation and product to American Lighting, Inc by the retailer, American Lighting, Inc reserves the right to inspect the product for misuse or abuse. Claims for indirect or consequential damages or for product that, in American Lighting, Inc’s opinion has bee misused, will be denied. This is a warranty of product reliability only and not a warranty of merchantability or fitness for a particular purpose. American Lighting, Inc shall have no liability whatsoever in any event for payment of incidental or consequential damages, including, without limitations, installation costs and damages for personal injury and property. These products may represent a possible shock or fire hazard if improperly installed or altered in any way. This warranty applied only to product that has been properly installed in accordance with instruction sheet and current local codes and/or the National Electrical Code. Warranty does not apply to any product that has been improperly installed or in situation where components have been altered in any way. This warranty: (1) excludes expendable parts including but not limited to light bulbs, batteries; (2) carries a 2-year finish warranty protecting finish against tarnishing, flaking, and discolorations; (3) shall be void if this lighting fixture is not installed in the U.S.A.; and (4) does not cover any losses, labor, injuries to persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary from state to state, Be careful, it is recommended that installation be done by a qualified professional; the purchaser has sole responsibility for proper installation in compliance with all state and local code requirements. Seller’s employees are not qualified to advise  you on the use of this Merchandise. Any oral representation(s) made will not be binding on seller or its employees. The rights under this limited warranty are to the original purchaser of the Merchandise and may not be transferred to any subsequent owner. This limited warranty is in lieu of all warranties,  expressed or implied including warranties or merchantability and fitness for a particular purpose. Seller shall not be liable for any special, incidental, or consequential damages. The sold exclusive remedy against the seller will be for the replacement of any defects as provided herein, as long as the seller is willing or able to replace this product or is willing to refund the purchase price as provided above.
For questions/comments, technical assistance, or repair parts – Please call toll free at 1-800-285-8051 (M-F 8am- 5pm), CST)

©2022 American Lighting, Inc. REV2232
www.AmericanLighting.com
11775 E. 45th Ave. Denver, CO 80239
Ph: 1-800-880-1180
Fax:303-695-7633

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>