GE Lighting 93129138 LED Linkable Motion Bulb User Guide
- June 13, 2024
- GE Lighting
Table of Contents
GE Lighting 93129138 LED Linkable Motion Bulb
GETTING STARTED
INSTRUCTION
- Insert the bulb into the fixture
- Turn on the power source to the bulb*
- The bulb will turn on when motion is detected at night
Visit gelighting.com/led-plus
- The bulb will turn on for 30 seconds to indicate bulb is powered on, then turn off until activated by motion at night.
- For always-on mode, turn the wall switch off and on twice within 3 seconds. The bulb will flash to confirm that always-on mode is active. To reactivate motion-sensing mode, turn the wall switch aft for more than seconds and then turn on the bulh will stav on for 5 minutes after the last motion is detected.
GE is a trademark of General Electric Company. Used under trademark license.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>