VEVOR HS001 Wood Lathe HP Wood Lathe Machine Instruction Manual
- June 13, 2024
- VEVOR
Table of Contents
VEVOR HS001 Wood Lathe HP Wood Lathe Machine
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and doses not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us:
CustomerService@vevor.com
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
MATTERS NEEDING ATTENTION
The information contained in this handbook is intended as a guide to the operation of these machines and does not form part of any contract. The data it contains has been obtained from the machine manufacturer and from other sources. We strive to ensure the accuracy of this information and try to verify each item and each data, but we cannot guarantee the full accuracy of the information, which means that the equipment supply may differ in detail from the description of the instructions. Furthermore, development of the machine may mean that the equipment supplied may differ in detail from the descriptions herein. The responsibility therefore lies with the user to satisfy himself that the equipment or process described is suitable for the purpose intended.
QUALITY ASSURANCE
We will make every effort to ensure the quality of our products, and we
promise to consumers that we will guarantee our products for one year, except
for machine damage caused by improper operation of customers, and accidents
resulting therefrom, or abnormal wear and damage caused by lack of
maintenance.
In order to fulfill the warranty commitment, the product or part with quality
problems, please return to us for verification, postage prepaid. Goods sent
back should be accompanied by a note of the date of purchase and a written
explanation of the quality of the product. After our inspection and
confirmation, we will repair or replace their products, or refund the payment;
If we fail to provide repair or replacement in a timely manner, we shall bear
the costs arising from the repair or replacement of the products; If the
damage is not due to the quality of the product, but due to the user’s
improper operation or other reasons, the cost shall be borne by the customer.
Our company reserves the right to make changes to this specification and product specifications. We will make continuous efforts to improve the quality of our products.
All rights reserved. Reproduction or reproduction is not allowed without permission.
SAFETY WARNING
| Symbol | Symbol Description |
|---|---|
| Warning – To reduce the risk of injury, user must read instructions manual |
carefully.
| This symbol, placed before a safety comment, indicates a kind of precaution,
warning, or danger. Ignoring this warning may lead to an accident. To reduce
the risk of injury, fire, or electrocution, please always follow the
recommendation shown below.
| Danger!
Risk of personal injury or environmental damage! Risk of electric shock! Risk of personal injury by electric shock!
| Alternating current
| Beware of clamping
| Warning- Be sure to wear ear protectors when using this product.
| Warning- Be sure to wear eye protectors when using this product.
| Warning- Be sure to wear dust masks when using this product.
| Warning- Be sure to wear dust masks when using this product.
| This product is of protection class Ill.
| FCC statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
| Disposal information:
This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices
WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this machine. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
-
The machine tool should be used by experienced personnel. If you are not familiar with the operation process of the lathe, do not use the machine tool at will. Use the instructions before operating.
-
Before starting the machine tool, the safety cover should be in the correct position.
-
Before starting the machine tool, please check whether the tool rest wrench and chuck key are removed.
-
Prevent the machine from starting accidentally. Turn off the motor power before clamping the workpiece or tool.
-
Don’t force cut. Cutting according to the set cutting speed, cutting depth and feed speed.
-
Use the right tools. Use the correct tool or workpiece for machining.
-
Keep the tool sharp and clean to ensure normal and safe operation.
Lubricate and replace accessories regularly. -
Before adjusting or repairing the machine, be sure to disconnect the power supply.
-
Please check the safety performance of the machine before starting it.
Check the performance of all moving parts. All parts must be installed correctly. Damaged parts must be repaired promptly. -
When the machine is running, the operator shall not leave.
-
Keep the working place clean, dirty working environment is easy to lead to accidents.
-
Do not use the machine in dangerous environment.
Do not work in damp places. Ensure that electrical components are protected from moisture. Keep good lighting. -
Children are prohibited from entering the work site, and non-operating personnel should keep a safe distance from the work area.
-
To keep children out of the work area. The door should be locked when leaving the workshop.
-
Dress appropriately. Don’t wear loose clothing, gloves, ties, rings, bracelets, jewelry, etc. To be on the safe side, For the sake of safety, wearing non-slip shoes. If you have long hair, please wear a work hat.
-
Wear protective glasses when operating.
-
Pay attention to where you stand and keep your balance at all times.
-
Do not place your hands near the moving parts of the machine.
-
Do not perform any setting operations while the machine is running.
-
Read and understand all warning signs posted on the machine.
-
This manual is intended only to familiarize customers with the operation of the machine and is not a training manual.
-
Please obey these warnings or serious injury may result.
-
The machine will produce some harmful chemicals in the work of dust, sawing, grinding and drilling produced by grinding. To reduce the harm of these chemicals, please work in a well-ventilated place and wear safety devices. Such as particulate filter masks.
TECHNICAL PARAMETER
| Type number | HS001 |
|---|
Capacities
Swing over Bed| 70mm
Distance Between Centers| 160mm
Width of Bed| 60mm
Number of Spindle Speeds| Variable
Rating(s):| 110V-60Hz/220-240V-50Hz, 96W
Range of Spindle Speeds| 4200-8500RPM
Miscellaneous
Main Motor| DC24V, 96W
Length, Width and Height| 3506080mm
Product Weight| N.W.: 1.43Kg G.W.: 2.02Kg
Package Size| 425150185mm
The general information given in this specification is not binding.
Standard accessories (Fig. 1 )
| NO. | Name | QTY | UNIT |
|---|---|---|---|
| 1 | Adapter | 1 | pcs |
| 2 | Power cord | 1 | pcs |
| 3 | Woodworking lathe | 1 | pcs |
| 4 | Allen wrench 2.515mm | 2 | pcs |
| 5 | Ball fixing pin 1.5/2.0/2.5 mm | 1 | pcs |
| 6 | Threaded fixing pin | 1 | pcs |
| 7 | Drill bit chuck wrench | 1 | pcs |
| 8 | High speed steel carving knife | 1 | pcs |
| 9 | Wood handle carving knife | 6 | pcs |
| 10 | Diamond Blade Connection Connector | 1 | pcs |
| 11 | High-speed steel blade connection connector | 1 | pcs |
| 12 | 50mm diamond cutting blade | 1 | pcs |
| 13 | 50mm HSS cutting piece | 1 | pcs |
| 14 | Sandpaper adhesive tray | 1 | pcs |
| 15 | Sandpaper | 5 | pcs |
UNPACKING AND CLEANING
- Remove the woodworking lathe from the box
- Check all the accessories of the machine tool according to the packing list.
- Choose a location for the lathe that is dray, has good lighting and has enough room to be able to service the lathe on all four sides.
- To avoid twisting the bed, the lathe’s location must be absolutely flat and level. Bolt the lathe to the stand (if used).
- Clean all rust protected surfaces using a mild commercial solvent, kerosene or diesel fuel. Do not use paint thinner, gasoline or lacquer thinner. These will damage painted surfaces. Cover all cleaned surfaces with a light film of 20W machine oil.
General Description
Precision drill chuck (Fig. 2)
The clamping range is 0.6-6mm, with excellent quality, precision and
durability. Beautiful and cheap, equipped with a special drill chuck wrench
Double bearing high precision tailstock (Fig. 3)
Select the top tailstock of high-quality pure steel structure, strong and
durable, double bearing High precision
High quality ship type switch (Fig. 4)
High quality ship type switch, simple and easy to operate, high quality,
simple and easy operation
Turning (Fig. 5)
Flexible control, cutting all kinds of wood, Buddha beads, Bod hi and other
materials
Cutting (Fig. 6)
Change the tool rest lathe, change the table saw, cooperate with the saw
blade. Cut all kinds of materials easily
Polish (Fig. 7)
Replace the sandpaper tray, lathe sanding tray machine, and polish the diamond
edge angle and plane
Buddha bead repair (Fig. 8)
Glass hole opener is used to round Buddha beads, and then polished with
sandpaper.
LUBRICATION
CAUTION
Lathe must be serviced at all lubrication points and all reservoirs filled to
operating level before the lathe Is placed Into service!
Failure to comply may cause serious damage
Electricity
WARNING!
Connection of the lathe and all other electrical work may only be carried out
by an authorized electrician!
Failure to comply may cause serious injury and damage to the machinery and
property!
The HS001 WOOD LATHE is rated at 220V, 50Hz/110V,60Hz, 96W.
Confirm power available at the lathe’ s location is the same rating as the
lathe. Make sure the lathe is properly grounded.
MAINTENANCE
Keep the maintenance of the machine tool during the operation to guarantee the accuracy and service life of the machine tool.
-
In order to retain the machine’s precision and functionality. it is essential to treat it with care. Keep it clean and grease and lubricate it regularly. Only through good care. You can be sure that the working quality of the machine will remain constant.
NOTES: Disconnect the machine plug from the mains supply whenever you carry out cleaning, maintenance or repair work!
Oil, grease and cleaning agents are pollutants and must not be disposed of through the drains or in normal refuse. Dispose of those agents in accordance with current legal requirements on the environment. Cleaning rags impregnated with oil, grease and cleaning agents are easily inflammable. Collect cleaning rags or cleaning wool in a suitable closed vessel and dispose of them in an environmentally sound way – do not put them with normal refuse! -
Lubrication all slide ways lightly before every use.
-
During the operation. The chips which fall onto the sliding surface should be cleaned timely. and the inspection should be often made to prevent chips from falling into the position between the machine tool saddle and lathe bed guide way. Asphalt felt should be cleaned at certain time.
-
After the operation every day. Eliminate all the chips and clean different parts of the machine tool and apply machine tool oil to prevent rusting.
-
In order to maintain the machining accuracy. Take care of the center.
The surface of the machine tool for the chuck and the guide way and avoid mechanical damage and the wear due to improper guide. -
If the damage is found. The maintenance should be done immediately.
NOTES: Repair work may only be carried out by qualified personnel with the corresponding mechanical and electrical knowledge.
Technical Support and E-Warranty Certificate www.vevor.com/support
