ATEN US3310 2-Port 4K HDMI USB-C KVM Dock Switch User Guide
- June 13, 2024
- Aten
Table of Contents
US3310
2-Port 4K HDMI USB-C KVM Dock Switch
with Power Pass-through
Quick Start Guide
Package Contents
1 2-Port 4K HDMI USB-C KVM Dock Switch with Power Pass-through
2 USB-C Cables
1 Remote Port Selector
1 User Instructions
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and specifi
cations contained in this package are subject to change without prior notifi
cation by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and
software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information
|
---|---
http://www.aten.com/products/productItem.php?model_no=US3310|
http://www.aten.com/ext_libraries/manuals.php?n=us3310
The terms HDMI, HDMI High-Defi nition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Hardware Overview
Front View
- USB 3.2 Gen 1 Type-A Ports
Rear View
-
USB-C DC-in Port*
-
USB 3.2 Gen 1 Type-C Port 1 (Laptop)a
-
USB 3.2 Gen 1 Type-C Port 2 (Android : Samsung Dex or Huawei
Desktop mode)b -
HDMI Output Port
-
2.5mm Jack for Remote Port Selector
-
Remote Port Selector
a. Supports USB-C PD laptop charging at 5V, 9V, 15V, 20V output.
b. Supports max. 5V, 2A output.
*For device charging, a Limited Power Source (LPS) certifi ed USB-C PD Power Adapter over 65Watt is recommended. The minimum system power requirement for basic USB functions and video output should be at least 5V, 3A.
Top View
- Console Indicator (Port 1 LED)
- Console Indicator (Port 2 LED)
System Requirements:
Windows 10 and above, USB-C enabled computer with DP Alt Mode Mac OS X 10.12
and above, USB-C enabled computer
Android 8.0 and later, USB-C enabled Smartphone with DP Alt Mode*
- Only Samsung and Huawei support PC-like operation, others only support mirror mode.
Installation
- Plug the USB-C Cable between your computer and/or mobile device into the back of the US3310*.
- If you need PD laptop charging, please plug your computer to USB-C Port 1. 2. Plug an HDMI monitor to the US3310. 3. Plug USB-C power source as recommended. 4. Plug your USB peripheral devices into the US3310. 5. Plug the Remote Port Selector into the 2.5mm jack on the US3310.
Port Selection
Click the Port Selector (connected to the US3310) to switch between the 2
connected source device (computer and/or android mobile device).The Console
Indicator LED will light up to indicate which console is currently selected.
When the LED starts fl ashing, please check the power comsumption of your USB
peripheral device.
Declaration
Samsung DeX is a registered application of Samsung Electronics. US3310 is not
manufactured, sponsored, licensed or distributed by Samsung Electronics.
Huawei Desktop mode is a registered application of Huawei Technologies.
US3310 is not manufactured, sponsored, licensed or distributed by Huawei
Technologies.
For a list of supporting mobile device, refer to US3310’s user manual.
© Copyright 2023 ATEN ®International Co. Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co.,
Ltd.
All rights reserved. All other trademarks are the property of their respective
owners.
Part No. PAPE-1223-R40G
Released: 03/2023