Empire 83cm-33 Inch Tower Fan User Manual
- June 13, 2024
- Empire
Table of Contents
Empire 83cm-33 Inch Tower Fan User Manual
- DO NOT OPERATE THIS FAN IN WET OR DAMP AREARS SUCH AS THE BATHROOM
- THIS FAN IS INTENDED FOR INDOOR USE ONLY
- DO NOT LOCATE THE FAN NEAR LOOSE OBJECTS, SUCH AS CURTAINS
Assembling the Fan Base:
When putting the base of the fan together, use gentle force to click the two
parts in place and then secure with screws provided.
Safety Matters
- Please ensure that the input voltage is consistent before use. (220V-50Hz) *
- Before connecting the plug to the power supply, please ensure that your hands are dry to avoid electric shock.
- Before connecting the powersupply, ensure that the fanmodule is properly installed.
- Please place the product on a safe and levelsurface.
- When using near children, please take special care of children to avoid accidents.
- Please do not block any objectsinto/out of the air.
- Do not put fingers, other body parts or sundries into the air inlet/outlet to avoid injury and damage to the product
- Place the power cord securely to prevent tripping.
- Handle the power cord carefully to prevent damage to the power cord by other objects, such as the legs of the chair
- When the fan is rotating, do not forcibly stop the rotation of the fan, so as not to damage the parts.
- It is recommended to use a separate socket for fan operation and not overload use on an extension cable.
- If the power cord is found to be damaged or unsafe, please do not operate the fan. First find qualified personnel to replace or send the product to customer service for repair, inspection or even immersion.
- Please do not touch the power cord, plug, or any part of the product with water.
Cleaning Your Tower Fan
- Before moving or cleaning the product, please remove the plug from the socket.
- Do not put allow the power plug, power cord or the whole product into the water to clean!
- Use the vacuum cleaner, with nozzle, to clean the air outlet and air inlet on the front and back of thefan. The relevant powersupply must be removed before cleaning.
- Use a damp cloth to clean or duster to clean the control plate and base.
Note: Do not remove the fan grill for cleaning.
- Do not use gasoline, LPG, Tina water, alcohol, organic solvents, or other volatile liquids to clean the unit.
- Do not use steel brush or any other abrasive objects to clean the unit, to avoid damage to the product.
STORAGE
- Store the fan in a cool and dry place.
- Please keep the product away from children.
This manual isforreference only.
The Company reserves the right to modify or amend it without prior
notice.
Email: management@jplhenterprise.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>