PHANTEKS PH-PGPUKT4.0_DBK01 Vertical GPU Bracket Installation Guide

PREMIUM VERTICAL GPU BRACKET
INSTALLATION GUIDE
PH-PGPUKT4.0_DBK01
PH-PGPUKT4.0_DWT01
D-RGB Satin Black
D-RGB Matte White

PH-PGPUKT4.0_DBK01 Vertical GPU Bracket

https://phanteks.com/premium-gpu-bracket.html

Legenda
Remove
Install
Loosen

Phanteks will not take responsibility for any damages incurred due to incorrect installation or usage of this product.

SCOPE OF DELIVERY

PREPARE VERTICAL GPU BRACKET

1. INSERT RISER CABLE Insert the riser cable connector through the area at the bottom and align the PCIe and secure the riser cable.
2. INSTALL GRAPHICS CARD Push down the clip on the PCIe slot (1), install the graphics card (2). Secure the graphics card with two thumbscrews (3).
3. INSTALL BRACKET | UNIVERSAL If the manufacter is AMD or an other brand, please align the bracket with the top of the graphics card. Depending on the amount of PCIe connectors on the card itself, use one of the two positions to secure the graphics card with the thumb screw.
4. INSTALL BRACKET
   When using a NVIDIA graphics card, some cards have the option to secure the bracket with a screw directly to the graphics card. Depending on the size, you can slide the bracket to align with the card for the best fit.

CHOOSE VERTICAL OR ANGLED POSITION

VERTICAL POSITION >> STEP 5

ANGLED POSITION >> STEP 6 05 A MOTHERBOARD OFFSET First install the motherboard offset into the motherboard.![PHANTEKS PH-PGPUKT4.0_DBK01 Vertical GPU Bracket

• Stand](https://manuals.plus/wp-content/uploads/2023/09/PHANTEKS-PH- PGPUKT4.0_DBK01-Vertical-GPU-Bracket-Stand.jpg)Then secure the bracket with the motherboard screw. This is only possible if the bracket is not in an angled stand.
  05 B PSU COVER
  Some Phanteks chassis have an extra support option that can be secured with a motherboard screw.
  Only available for the following Phanteks cases: Eclipse G300A | Eclipse G360A | Eclipse G500A
  06 SET BRACKET ANGLE
  First remove the three thumb screws, then loosen the top thumb screw and hex screw to rotate the bracket freely.The Premium Vertical GPU Bracket can also be set in an angle of 15°. This can be done by removing the bottom right screw and loosen the blue highlighted screws. Gently slight the bracket, secure the bracket by fasten all hex screws again. Set the angle to 30°. To confirm the right angle, align the bottom right screw hole from the GPU bracket with the bottom right screw hole of the bracket. Secure the GPU bracket again with the previously removed thumb screws.

INSTALL GPU BRACKET

Unscrew the all PCI brackets from the chassis, next secure the riser cable by connecting it to the motherboards’ PCI-E slot. Align the GPU bracket with the open space and secure the GPU bracket with the thumbscrews.

REMOVE GRAPHIC CARD

1. REMOVE D-RGB STRIPBefore it is possible to remove the D-RGB bar, please remove the hex screw (1). Slide the D-RGB strip gently towards the back until it can’t go any further (2). Then tilt the D-RGB strip upwards to fully remove the D-RGB strip (3).
2. REMOVE GRAPHICS CARDUnscrew the bracket screws on the back (1) of the bracket, and the two top thumb screws (2). With the D-RGB strip removed, unlock the graphics card lock by gently pushing it down (3).
   Now it is possible to remove the graphics card by pulling it upwards (4)

Phanteks Taiwan Inc.
11F., No. 150, Jian 1st Rd.,
Zhonghe Dist. New Taipei City 235
Taiwan
Importer EU
Axpertec Int. B.V. (EU)
Sydneystraat 33
3047 BP Rotterdam
The Netherlands
Importer US
Axpertec Inc. (US)
20465 E Walnut Dr. N
City of Industry, California 91789
United States
www.phanteks.com

Documents / Resources

| PHANTEKS PH-PGPUKT4.0_DBK01 Vertical GPU Bracket [pdf] Installation Guide
PH-PGPUKT4.0_DBK01 Vertical GPU Bracket, PH-PGPUKT4.0_DBK01, Vertical GPU Bracket, GPU Bracket, Bracket
---|---

References

• Phanteks Innovative Computer Hardware Design

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>