PHANTEKS Glacier One T30 Gen2 D-RGB All In One Liquid CPU Cooler Installation Guide
- October 30, 2023
- PHANTEKS
Table of Contents
Glacier One T30 Gen2 D-RGB All In One Liquid CPU Cooler
Installation Guide
INSTALLATION GUIDE
VERSION 1.1
Glacier One T30 Gen2 D-RGB All In One Liquid CPU Cooler
INSTRUCTIONS
Thank you for choosing Phantoms. This manual will guide you through the
installation process of the Glacier One T30 Gen2 AIO CPU Cooler. If you have
any questions, please contact us through our customer service or social media.
This manual is for the following models:
PH-GO240T30 GEN2
PH-GO360T30 GEN2
Phantoms will not take responsibility for any damages incurred due to
incorrect installation or usage of this product.
ACCESSORIES
MOUNTING HARDWARE
SET THE T30 FAN RPM MODE
The T30 fan supports 3 different fan profiles via a switch on the fan hub. Please choose your preferred fan profile before installing the fan into your system. We recommend the default ‘Performance mode’.
MOTHERBOARD
PREPARATIONS
Follow the instructions for the corresponding socket.
AMD SOCKET AM4|AM5
Remove the stock mounting brackets.
Secure the 2x AM4/AM5 bracket to the motherboard with the original 4x mounting bracket screws.
INTEL SOCKET 115X / 1200 / 1700
INSTALLING THE PUMP BLOCK
- Secure the pump unit to the standoffs on the motherboard with the correct 4x Thumb Nuts for the corresponding socket.
- Attach the pump cap back on the pump after securing the thumb nuts.
MOUNT THE RADIATOR AND FANS
We recommend to install the fans to the radiator before mounting it into the chassis. 3 Types of screws are included to mount the radiator and the fans in different options:
Use the 5mm radiator screw to mount the radiator directly to the chassis.
Use the 36mm fan screw to mount the fan to the radiator (and chassis).
Use the 39mm Halos screw to mount the Halos and fans to the radiator (and
chassis).
Use the optional washers if necessary on the chassis for a secure fit.
Option A:
Option B:
Option C (When using Halos only):’
INSTALL THE TUBE CLIPS
Optional: Install the (3x) included tube clips for a tidy tube routing. Simply
snap the clips on the tubes.
CONNECT CABLES
The Glacier One T30 Gen2 is a plug-and-play solution that allows direct
control from the motherboard.
Pump & Fan cables
A) Daisy-Chain T30 fans
Connect the Fans together with the Daisy-chain cables and use the Fan PWM
Extension Cable to reach the motherboard.
B) Connect to the Motherboard
Choose between 2 configurations:
B1) Use the PWM Splitter Cable to connect the pump and fans to a single
motherboard CPU header.
B2) If 2x CPU headers are available on the motherboard, the pump and fans can also be connected individually (without PWM Splitter Cable) for more precise control.
D-RGB cable connection
The D-RGB lighting can be controlled through a D-RGB equipped Phantoms
chassis/controller or motherboard.
A) To Phantoms D-RGB Chassis/Controller Connect the Infinity Mirror Cap to the
Phantoms D-RGB controller
B) To D-RGB Motherboard
Use the 3-Pin D-RGB Motherboard Adapter to connect the D-RGB cable to a D-RGB
equipped motherboard (A-RGB).
follow motherboard manual for instruction on
D-RGB control
SUPPORT & WARRANTY
As a Phantoms customer, you are priority number one. We have a dedicated team across the globe to deliver the experience you deserve.
CUSTOMER CARE
RMA and Technical Support Americas
Hours : Monday-Friday 9:00-5:00 PST
Phone number : +1(909)598-2115
Email : support@phanteksusa.com
Facebook : @Phanteks
For spare parts and optional upgrades please visit:
www.axpertec.com (EU) |
www.phanteksusa.com (US)
RMA and Technical Support International Email : support@phanteks.com
Facebook : @Phanteks
6 years warranty
www.phanteks.com
References
- Axpertec International B.V – Axpertec International B.V.
- Phanteks Innovative Computer Hardware Design
- Phanteks Online Store
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>