Phanteks Glacier One T30v2 Innovative Computer Hardware Design Installation Guide
- June 9, 2024
- PHANTEKS
Table of Contents
Phanteks Glacier One T30v2 Innovative Computer Hardware Design Installation
Guide
CONNECT CABLES
The Glacier One T30 Gen2 is a plug-and-play solution that allows direct
controll from the motherboard.
Pump & Fan cables
A) Daisy-Chain T30 fans
Connect the Fans together with the Daisy-chain cables and use the Fan PWM
Extension Cable to reach the motherboard.
B) Connect to the Motherboard
Choose between 2 configurations:
B1) Use the PWM Splitter Cable to connect the pump and fans to a
single motherboard CPU header.
B2) If 2x CPU headers are available on the motherboard, the pump and fans can also be connected individually (without PWM Splitter Cable) for more precise control.
D-RGB cable connection
The D-RGB lighting can be controlled through a D-RGB equipped Phanteks
chassis/controller or motherboard.
A) To Phanteks D-RGB Chassis/Controller
Connect the Infinity Mirror Cap to the Phanteks D-RGB controller
B) To D-RGB Motherboard
Use the 3-Pin D-RGB Motherboard Adapter to connect the D-RGB cable to a D-RGB
equipped motherboard (A-RGB*).
*follow motherboard manual for instruction on D-RGB control
INSTRUCTIONS
Thank you for choosing Phanteks. This manual will guide you through the installation process of the Glacier One T30 Gen2 AIO CPU Cooler. If you have any questions, please contact us through our customer service or social media. The T30 fan supports 3 different fan profiles via a switch on the fan hub. Please choose your preferred fan profile before installing the fan into your system. We recommend the default ‘Performance mode’. The Glacier One T30 Gen2 is a plug-and-play solution that allows direct controll from the motherboard.
This manual is for the following models:
PH-GO240T30 GEN2
PH-GO360T30 GEN2
Phanteks will not take responsibility for any damages incurred due to incorrect installation or usage of this product.
ACCESSORIES
4-PIN PWM SPLITTER CABLE 1x | 80mm
4-PIN FAN PWM EXTENSION CABLE 1x | 500mm
3-PIN D-RGB MOTHERBOARD ADAPTER 1x | 600mm
PH-NDC THERMAL COMPOUND 1x
TUBE CLIPS 3x
MOUNTING HARDWARE
INTEL STAND-OFF 4x
”
1700/AM5 THUMB NUT 4x
1200/AM4 THUMB NUT 4x
AMD AM4/AM5 BRACKET 2X
INTEL 1200/1700 BACKPLATE 1X
WASHERS 8x/12
39mm HALOS SCREWS 8x/12x
36mm FAN SCREWS 8x/12x
5mm RADIATOR SCREWS 8x/12x
SET THE T30 FAN RPM MODE
- Advanced mode
- Performance mode (recommended)
- Hybrid mode
MOTHERBOARD PREPARATIONS
Follow the instructions for the corresponding socket
AMD SOCKET AM4|AM5
Remove the stock mounting brackets.
Secure the 2x AM4/AM5 bracket to the motherboard with the original 4x mounting
bracket screws
INTEL SOCKET 115X / 1200 / 1700
Prepare the Intel Backplate for the correct socket.
Secure the Intel Stand-offs to the motherboard and Intel Backplate.
INSTALLING THE PUMP BLOCK
- Secure the pump unit to the standoffs on the motherboard with the correct 4x Thumb Nuts for the corressponding socket.
- Attach the pump cap back on the pump after securing the thumb nuts.
INSTALL
AM4 | 115X | 1200 THUMBNUTS
**AM5 / 1700 THUMBNUTS
**
PRO TIP
For best performance position the tubes towards the top or bottom of the
socket.
PRO TIP
The thermal compound is pre-applied. More thermal compound is included for
future installations
MOUNT THE RADIATOR AND FANS
We recommend to install the fans to the radiator before mounting it into the chassis. 3 Types of screws are included to mount the radiator and the fans in different options:
Use the 5mm radiator screw to mount the radiator directly to the chassis.
Use the 36mm fan screw to mount the fan to the radiator (and chassis).
Use the 39mm Halos screw to mount the Halos and fans to the radiator (and chassis)
Use the optional washers if necessary on the chassis for a secure fit.
Option A:
Option B:
Option C (When using Halos only
INSTALL THE TUBE CLIPS
Optional: Install the (3x) included tube clips for a tidy tube routing. Simply
snap the clips on the tubes.
PRO TIP
Fan cables can be routed through the middle of the Tube Clips
SUPPORT & WARRANTY
As a Phanteks customer, you are priority number one. We have a dedicated team across the globe to deliver the experience you deserve.
CUSTOMER CARE
RMA and Technical Support Americas
Hours : Monday-Friday 9:00-5:00 PST
Phone number : +1(909)598-2115
Email : support@phanteksusa.com
Facebook : @Phanteks
For spare parts and optional upgrades please visit:
www.axpertec.com (EU) |
www.phanteksusa.com (US)
RMA and Technical Support International
Email : support@phanteks.com
Facebook : @Phanteks
References
- Axpertec International B.V – Axpertec International B.V.
- Phanteks Innovative Computer Hardware Design
- Phanteks Online Store
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>