Kinderkraft MOOV 3in1 Multifunctional Baby Stroller User Manual
- June 13, 2024
- Kinderkraft
Table of Contents
• MOOV / MOOV CT •
STROLLERS
Available only in selected countries
Details onkinderkraft.com
kinderkraft.com /kinderkraftofficial kinderkraft @kinderkraftofficial
Stroller USER MANUAL
MODEL: MOOV / MOOV CT
V. 3.1
The illustrations are for illustration only and do not represent the product.
A + K B
C D
E F + H
G I
J L
M N
O
1 2
3 4
5 6
6A 7
8 8A
9 10
11 12
13 14
15 16
17 18
19 20
21 22
23 24
25 26
27 28
29 30
31 32
33 34
35 36
37 38
39 40
41
Dear Customers,
Thank you for purchasing a Kinderkraft product. Our products have been
designed for your child’s safety and comfort.
The buggy is an ideal solution for those who value quality, modernity and
functionality. Please read the manual carefully and follow its
recommendations.
Important – Read carefully and keep for future reference
WARNING!
- Never leave the child unattended.
- Ensure that all the locking devices are engaged before use.
- To avoid injury ensure that the child is kept away when unfolding and folding this product.
- Do not let the child play with this product.
- Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
- This product is not suitable for running or skating.
- Age and weight usage: from 0 months up to 22 kg or 4 years whichever come first.
- The product is designed to transport one child at a time.
- The maximum basket load is 4 kg.
- Any load attached to the handle and/or on the back of the backrest and/or on the sides of the vehicle will affect the stability of the vehicle.
- Maximum weight of a bag attached to the adjustable handle is 2 kg.
- Lift the front suspension when going up a curb or step.
- The brakes should be locked when the child is placed in or taken out of the buggy.
- Use only parts and accessories supplied or recommended by the manufacturer. Do not use other parts or accessories.
- Do not place the product near open flame or other heat sources.
- Do not use with an additional platform.
The following applies to the bassinet:
WARNING!
- Use a harness as soon as the child can sit unaided.
- Restraint system should be tucked under the enclosed mattress.
- 5The bassinet is intended for children from birth to 15 kg.
- The head of the child in the pram body should never be lower than the body of the child.
- The bassinet must not be used as a child carrier. The bassinet handle is only designed for assembly and disassembly on the buggy frame.
- Do not insert an extra mattress apart from that supplied with the product.
The following applies to the buggy:
WARNING!
- This seat unit is not suitable for children under 6 months
- Always use the restraint system
The product is intended for children from 6 months old to 22 kg or 4 years whichever come first.
Applies to Kinderkraft car seat:
- Kinderkraft stroller is available also in a set with a compatible Kinderkraft car seat.
- The product is intended for children from birth to 13 kg.
- If the seat is used together with the chassis, it does not replace a cot or bed. For sleep, place the child in a suitable pram body, cot or bed.
- Use only parts and accessories supplied or recommended by the manufacturer.
I Buggy components
A. Frame I. Hood
B. Parent handle J. Footmuff
C. Front wheels x2 K. Basket
D. Rear wheels x2 L. Car seat adapters x2
E. Safety bar M. Bag
F. Seat/bassinet 2 in 1 N. Rain cover
G. Element of bassinet rack/seat O. Mosquito net
H. Mattress
II BUGGY FRAME ASSEMBLY To initially unfold the frame, unlock the hook
(FIG. 1) and then simultaneously pull the two free ends of the frame, until
you hear the lock click (FIG. 2). Insert the rear wheel axles (D) in the
corresponding slots until you hear the lock click (FIG. 3). Slide the front
wheels (C) in the corresponding slots until you hear the lock click (FIG. 4).
In the next step attach free ends of the basket (K) to the frame (FIG. 5).
Insert the ends of the parent handle (B) in the free ends of the frame (FIG.
6). Make sure the latches are secured (FIG. 6A). An unfolded frame is shown in
Figure 7.
WARNING! If the buggy has pumped wheels: Do not exceed the maximum
permissible pressure in the wheels, the value is indicated on the wheel tyres.
WARNING! Before using the buggy, make sure that all the wheels are properly
installed.
III BASSINET ASSEMBLY The assembly of the bassinet should begin with
inserting the loose part of the frame (G) into the slots in the bassinet (F)
(FIG. 8). Make sure the latches are secured (FIG. 8A). Then fasten the zip
fastener on the perimeter of the mounted part (FIG. 9). Adjust the rod under
the bassinet with straps and secure with snaps (FIG. 10). A complete bassinet
is shown in Figure 11. The bassinet can now be attached to the buggy frame
(you will hear the sound of the locks on both sides of the buggy) (FIG. 12).
WARNING! THE BASSINET CAN ONLY BE MOUNTED FACING BACKWARDS (the child faces
the person pushing the buggy).
NOTE! When the child starts to sit independently, attach an additional
harness to the attachment points shown in the picture (Fig. 41).
IV ASSEMBLY OF SAFETY BAR, HOOD, FOOTMUFF The safety bar (E) can be
used in both the bassinet and the pushchair function. Insert the tips of the
safety bar in the corresponding slots until you hear the locks on both sides
(FIG. 13). Start the installation of the hood (I) from inserting plastic clips
in the fastenings in the bassinet/seat frame (FIG. 14). Proper protection is
indicated by a quiet click. Lastly, secure the hood with Velcros (FIG. 15) and
wrap around the tilt angle adjustment lever (Fig. 16).
Start the installation of the footmuff (J) from pulling it as shown in Figure
17. Wrap the ribbons on both sides of the safety bar and secure with snaps
(FIG. 18). Wrap the free end of the footmuff around the safety bar and secure
with buttons (FIG. 19). Additionally, attach both ends of the footmuff to the
shell (FIG. 20).
V CONVERTING THE BASSINET INTO THE SEAT To convert the bassinet into the
seat, you must first pull out the belts on both sides of the shell (FIG. 21)
and under the footrest. Connect the ends of the belts behind the back, under
the seat and the footrest (example Figure 22). Properly fastened belts should
look as shown in Figure 23 (seat angle control method described in section
VIII).
VI MOUNTING THE BAG, MOSQUITO NET AND RAIN COVER The MOOV stroller set
includes: bag (M), rain cover (N) and mosquito net (O). Use the silicone
hangers to hang the bag on the parent handle (FIG. 24).
Place the mosquito net and secure with Velcros. Place the rain cover on the
buggy and secure with Velcros around the frame (FIG. 25).
VII MOUNTING THE BABY CAR SEAT The supplied adapters (L) are compatible
with the following car seats: Kinderkraft, Maxi Cosi®, Cybex® and are suitable
for models such as: Kinderkraft MINK, Cybex Aton, Aton 2, Aton Q i Maxi Cosi
Mico, Mico AP, Mico NXT, Mico Max 30, Citi, Cabrio, and CabrioFix.
Slide the adapters into the slots in the frame until you hear the sound of the
lock (FIG. 26). The adapters should be slightly tilted to the parent. Put the
seat in the adapters and make sure it is properly secured. XMOOV buggy with
MINK car seat are shown in Figure 27. To remove the adapters of the buggy
frame, press the lock button in each of the adapters (FIG. 28).
WARNING! The seat must be always placed on the frame back to the direction
of travel (the child should face the person pushing the buggy).
VIII USE OF BRAKE The buggy is equipped with a foot brake located on
the rear axle. Press the brake pedal down to activate it. The brake is
released after the pedal is lifted up (FIG. 29).
IX BUGGY DISASSEMBLY After removing the bassinet/seat or child safety
seat (FIG. 28 & 39), press the frame collapse lock, and then pull the levers
at both sides and finish with pushing down the parent handle (FIG. 30). A
correctly folded frame must be secured with the side lock (FIG. 31). If
necessary, the front and rear wheels can be removed from the frame by pressing
the buttons marked in Figures 32 and 33.
X BUGGY ADJUSTMENT Front wheels in the MOOV buggy can be blocked in the
forward movement position. Enable this mode by lowering the lock sliders (FIG.
34). To unlock the front wheels, pull the sliders up.
The hood can be enlarged by opening the zip fastener on the outer side of the
cover (FIG. 35).
To adjust the parent handle, press the lock buttons on both sides of the buggy
and adjust the handle to a comfortable height (FIG. 36).
The safety bar can be detached from the frame partially or completely by
pressing a button on the side/sides (FIG. 37)
The seat tilt angle can be adjusted using the lever at the top (FIG. 38). The
seat has three positions: lying, reclining and sitting.
WARNING! When the seat is in the reclining position, do not unfasten
the straps at the back of the backrest, as this may cause the child’s
head to be positioned lower than the rest of their body.
The seat is adjustable so that the child can face the parent or the direction
of travel. To do this, press the buttons on both sides of the seat, change the
direction and attach the seat until it clicks (FIG. 39).
XI RESTRAINT SYSTEM. To secure the child, connect the fasteners of hip
and shoulder belts and then insert them into the middle clamp (FIG. 40) until
it engages. Adjust restraint system each time you fasten, to properly secure
the child.
The belts are unfastened in the reverse order.
The mattress (H) supplied should be always placed in the bassinet/seat. For
the smallest children who are not yet able to sit unaided, the restraint
system in the bassinet should be threaded through the slots in the mattress
and hidden under it. The seat/carrycot has attachment points for an additional
harness.
XII CARE AND MAINTENANCE The buyer is responsible for proper installation
of all functional elements as well as for carrying out all required
maintenance and adjustments in order to keep the buggy in good technical
condition.
The buggy must be periodically checked for potential problems. Significant
measures to be applied to ensure the child’s safety and prevent shortening of
the product life have been presented below:
- Check the strength and safety of all rivets and connections.
- Check all wheel locking equipment and tyres. If necessary, replace or repair.
- Check if all safety devices work properly, particularly the main and additional fasteners that should move freely at any time.
Please, stop using the buggy if there are doubts as to its proper use or a
suspicion of any danger.
If the wheels squeak, apply a thin layer of silicone. Do not use oil or grease
based products as they attract dirt, which makes buggy movement difficult.
XIII CLEANING If the elements of the buggy chassis have been exposed to
saltwater, rinse with tap water as soon as possible.
Do not wash. Clean the product gently with a damp cloth and a mild detergent|
Wash at max. 30°C, gentle process
---|---
Do not bleach| Do not dry in a tumble dryer
Do not iron| Do not dry clean
Hand wash|
Seat / bassinet cover, Hood, basket: Do not wash. Clean the product
gently with a damp cloth and a mild detergent. Do not bleach. Do not dry in a
tumble dryer. Do not iron. Do not dry clean
mattress: Hand wash. Do not bleach. Do not dry in a tumble dryer. Do not
iron. Do not dry clean
Footmuff, bag: Wash at max. 30°C, gentle process. Do not bleach. Do not
dry in a tumble dryer. Do not iron. Do not dry clean.
Do not fold or store the product when it is wet and never store it in wet
conditions, as it can lead to mould growth.
XIV Warranty
-
All Kinderkraft products are covered by a 24-month warranty. The warranty period starts from the date the product is handed over to the Buyer.
-
The warranty is only valid in the member states of the European Union, excluding overseas territories and the territory of the United Kingdom of Great Britain and Northern Ireland excluding the British Overseas Territories.
-
The manufacturer’s warranty does not apply to countries not listed above. The conditions of the additional warranty may be determined by the Seller.
-
In some countries, it is possible to extend the warranty to a limited period of 120 months (10 years).The complete terms and conditions and the warranty extension registration form are available at WWW.KINDERKRAFT.COM
-
Claims must be made by completing the form available at WWW.RMA.KINDERKRAFT.COM
-
The warranty does not cover:
A. Cosmetic damage, including but not limited to: scratches, dents and cracks in plastic, unless the failure is due to a material or manufacturing defect;
B. Damage resulting from misuse or poor maintenance – including but not limited to: mechanical damage to products caused by misuse or poor maintenance. Refer to the instructions for use and installation of the product contained in the user manual;
C. Damage caused by improper assembly, installation or disassembly of products and/or accessories. Refer to the instructions for use and installation of the product contained in the user manual;
D. Damage caused by corrosion, mould or rust, resulting from improper maintenance, care and storage;
E. Damage caused by normal wear and tear or otherwise resulting from the normal passage of time. This includes: tears or punctures in inner tubes; tyre damage; tyre tread damage; fading of fabrics resulting from mechanical use (e.g. on joints and covering of moving parts);
F. Damage or erosion caused by sun, perspiration, detergents, storage conditions or frequent washing, etc;
G. Damage caused by accident, abuse, misuse, fire, contact with liquid, earthquake or other external causes;
H. Products that have been modified to change functionality without 4Kraft’s written consent;
I. Products from which the serial number or lot number has been removed or tampered with in any way;
J. Damage caused by the use of third party components or products – including but not limited to: cup holders, umbrellas, reflectors, bells;
K. Damage caused by transport or by ground handling service providers. -
The warranty period for accessories included with the product is 6 months from the date of sale, excluding the faults described above.
-
These warranty conditions are complementary to the Customer’s statutory rights with respect to 4KRAFT sp. z o.o. The warranty does not exclude, limit or suspend the Customer’s rights under warranty for defects in goods sold.
-
The full text of the Terms and Conditions of the Warranty is available on the website WWW.KINDERKRAFT.COM
In the interests of our Clients – we are at your disposal! If you have a problem with the product you received, contact us in the most convenient way for you!
International: support@kinderkraft.com (0048) 61 646 02 37
kinderkraft.com kinderkraftofficial kinderkraft kinderkraftofficial
MANUFACTURER:
4Kraft Sp. z o.o. ul. Tatrzanska 1/5 60-413 Poznan, Poland
Documents / Resources
|
Kinderkraft MOOV 3in1 Multifunctional Baby
Stroller
[pdf] User Manual
MOOV 3in1 Multifunctional Baby Stroller, MOOV, 3in1 Multifunctional Baby
Stroller, Multifunctional Baby Stroller, Baby Stroller
---|---