DCW Editions Rosalie Wall Light Inspyer Lighting User Guide
- June 13, 2024
- DCW editions
Table of Contents
Julie Fuillet (design)
INSTRUCTION & USE SHEET
Rosalie Wall Light Inspyer Lighting
IN THE BOX
REQUIRED TOOLS
WARNING
The safety of this fixture is only guaranteed if the instructions have been
observed. — Always disconnect power before working on fixture. — Fixture must
not be installed in any position other than that shown in instructions. —
Assembly and maintenance of fixture must be performed carefully so as not to
damage components. — Replacement bulbs must be of same type and wattage as
specified in instructions. — Metal surfaces, glass or other parts of fixture
may be cleaned with a soft damp cloth and mild detergent.— DCW ÉDITIONS will
replace merchandise with manufacturing defects only if it is returned to the
retailer from which it was purchased. — If you are unsure about your wiring,
please consult a qualified electrician. The damaged cables should be changed
by manufacturer or distributor or qualified electrician. — The light source
contained in this luminaire shall only be replaced by the manufacturer or his
service agent or a similar qualified person.
This product contains a light source of energy efficiency class X (LED Source)
— Do not dispose of electrical appliances as unsorted municipal waste, use
separate collection facilities.
Contact your local government for information regarding the collection systems
available. If electrical appliances are disposed of in landfills or dumps,
hazardous substances can leak
into the groundwater and get into the food chain, damaging your health and
well-being.
| Replaceable (LED only) light source by a professional.
---|---
| Replaceable control gear by a professional.
STEP 1
Unscrew the two screws that hold the plate
STEP 2
Trace and drill the wall with a 7 mm drill bit
STEP 3
Insert the screws and fix the plate to the wall
STEP 4
Connect the driver to the power supply
STEP 5
Screw the lamp on the plate
