DCW Editions FOCUS X3 Chandelier Matt White Instruction Manual

June 10, 2024
DCW editions

DCW Logo DCW Editions FOCUS X3 Chandelier Matt WhiteFOCUS X3 & X5
INSTRUCTION & USE SHEET

IN THE BOX

DCW Editions FOCUS X3 Chandelier Matt White - IN THE
BOX

REQUIRED TOOLS

DCW Editions FOCUS X3 Chandelier Matt White - IN THE BOX
1

WARNING
The safety of this fixture is only guaranteed if the instructions have been observed.

  • Always disconnect power before working on fixture.
  •  Fixture must not be installed in any position other than that shown in instructions.
  • Assembly and maintenance of fixture must be performed carefully so as not to damage components.
  • Replacement bulbs must be of same type and wattage as specified in instructions.
  • Metal surfaces, glass or other parts of fixture may be cleaned with a soft damp cloth and mild detergent.
  • DCW ÉDITIONS will replace merchandise with manufacturing defects only if it is returned to the retailer from which it was purchased.
  • If you are unsure about your wiring, please consult a qualified electrician. The damaged cables should be changed by manufacturer or distributor or qualified electrician.

This product contains a light source of energy efficiency class.
— Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact your local  government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

DCW Editions FOCUS X3 Chandelier Matt White - IN THE BOX
2

Replaceable (LED only) light source by a professional. Replaceable control gear by end-user.

STEP 1
Remove the platet

DCW Editions FOCUS X3 Chandelier Matt White - platet

STEP 2
Drill the ceiling, insert the plugs, and fix the plate to the ceiling using the screws

DCW Editions FOCUS X3 Chandelier Matt White - platet 1

STEP 3
Adjust the length of the suspension cable and the electric cable

STEP 4
Connect the electrical supply to the luminaire

STEP 5
Fix the canopy on the plate

DCW Editions FOCUS X3 Chandelier Matt White - platet 1

STEP 6

The horizontality of the structure is set in the factory. If adjustments are necessary, unscrew the small screws and slide the bar lightly to lengthen the segment which leans downwards, then screw in again.

DCW Editions FOCUS X3 Chandelier Matt White - plate 4

DCW Logo DCWE.FR

Documents / Resources

| DCW Editions FOCUS X3 Chandelier Matt White [pdf] Instruction Manual
FOCUS X3 Chandelier Matt White, FOCUS X3, Chandelier Matt White, Matt White
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals