DCW EDITIONS BS8 L Mantis Floor Lamps Instruction Manual
- June 12, 2024
- DCW editions
Table of Contents
DCW EDITIONS BS8 L Mantis Floor Lamps
WARNING
The safety of this fixture is only guaranteed if the instructions have been
observed. — Always disconnect the power before working on the fixture. — The
fixture must not be installed in any position other than that shown in the
instructions. — Assembly and maintenance of fixtures must be performed
carefully so as not to damage components. — Replacement bulbs must be of the
same type and wattage as specified in the instructions. — Metal surfaces,
glass, or other parts of the fixture may be cleaned with a soft damp cloth and
mild detergent. DCW ÉDITIONS will replace merchandise with manufacturing
defects only if it is returned to the retailer from which it was purchased. —
If you are unsure about your wiring, please consult a qualified electrician.
The damaged cables should be changed by the manufacturer or distributor or
qualified electrician.
INSTALLATION
To swing the arm, slide the roller (A) on the ring (B). Be careful not to pull
directly on the arm.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>