DCW editions Lampe Gras N° 104 Gras Wall Lamp Instructions
- June 9, 2024
- DCW editions
Table of Contents
Lampe Gras N° 104 Gras Wall Lamp
Instructions
Lampe Gras N° 104 Gras Wall Lamp
IN THE BOX
REQUIRED TOOLS
WARNING
The safety of this fixture is only guaranteed if the instructions have been observed.
- Always disconnect power before working on fixture.
- Fixture must not be installed in any position other than that shown in instructions.
- Assembly and maintenance of fixture must be performed carefully so as not to damage components.
- Replacement bulbs must be of same type and wattage as specified in instructions.
- Metal surfaces, glass or other parts of fixture may be cleaned with a soft damp cloth and mild detergent.
- DCW ÉDITIONS will replace merchandise with manufacturing defects only if it is returned to the retailer from which it was purchased.
- If you are unsure about your wiring, please consult a qualified electrician.
The damaged cables should be changed by manufacturer or distributor or
qualified electrician.
STEP 1
Mark then make holes in the wall with a Ø 7 diameter
STEP 2
Connect electric wires
STEP 3
Fix the lamp to the wall
STEP 4
Install the reflector, glassware holder, bulb and then the glass. Note that
the silicone gaskets must be correctly positioned to ensure waterproofs.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>