VEVOR ICQN Built-in Induction Hob User Manual

VEVOR ICQN Built-in Induction Hob

Product Information

The Built-in hob induction ICQN is an environment-friendly product produced in modern facilities under precise conditions to ensure a high sense of quality. It is designed for domestic use and complies with EEE Regulations. The technical specifications of the product may be subject to change without prior notice. Please note that the images in the manual are schematic and your appliance may not feature all the functions specified.

Product Usage Instructions

Before using the induction stove, it is important to read and understand the operating manual thoroughly. This will help you use the appliance safely and efficiently.

Important Warnings

1. Always have installation and repair performed by an authorized service provider. Unauthorized operations may void the warranty.
2. Read the operating instructions carefully to ensure safe and correct usage.
3. Use the cooker according to the provided operating instructions.
4. Keep children below the age of 8 and pets away from the appliance during operation.
5. Avoid storing materials on the cooking surface to prevent fire hazards.
6. The appliance and its accessible parts become hot during operation, so handle with caution.
7. Refer to the label or data plate for specific setting conditions of the device.
8. Supervise children and keep them away when the grill is in use.
9. The appliance should only be used for cooking and not for heating a room.
10. Do not use steam cleaners to clean the appliance.
11. In case of fire, shut down the device circuit and cover the flame with a cover or fire blanket. Do not use water to extinguish the fire.
12. Keep children under 8 years of age away from the appliance if they cannot be continuously monitored.
13. Avoid touching the heating elements.
14. Always supervise the cooking process.
15. The appliance is not compatible with external timers or remote control systems.
16. Children over 8 years of age and individuals with physical, hearing, or mental challenges can use the device as long as control is ensured or they are provided with information about the potential dangers.

For detailed instructions on electrical connection, introduction of the appliance, technical features, installation of the cooktop, using the appliance, cleaning and maintenance, energy-saving recommendations, handling rules, troubleshooting, environmentally-friendly disposal, and package information, please refer to the user manual provided.

Dear Customer,

• Thank you for choosing products. We aim to allow you to optimally and efficiently use this environment-friendly product produced in our modern facilities under precise conditions with respect to sense of quality in total.
• We advise you to read these operating manual thoroughly before using the induction stove and keep it permanently so that the features of the induction stove you have purchased will stay the same as the first day for a long time and serve in an optimum efficient way.
• Remark: This Operating Manual is prepared for multiple models. Your appliance may not feature some functions specified in the manual.
• These functions are marked by the sign *.
• In order to increase the product quality, the technical specifications may be changed without prior notice.
• The product images are schematic.
• Our appliances are intended for domestic use. It is not intended for commercial use.
• PLEASE READ THE INSTRUCTIONS BEFORE INSTALLING OR USING THIS APPLIANCE.”
• This product has been produced in modern environment-friendly facilities without adversely affecting nature.
• Complies with EEE Regulation

IMPORTANT WARNINGS

1. Installation and repair should always be performed by “AUTHORIZED SERVICE”. Manufacturer shall not be held responsible for operations performed by unauthorized persons.
2. Please read this operating instructions carefully. Only by this way you can use the appliance safely and in a correct manner.
3. The cooker should be used according to operating instructions.
4. Keep children below the age of 8 and pets away when operating.
5. WARNING: Fire hazard; do not store the materials on the cooking surface.
6. WARNING: The appliance and its accessible parts are hot during operation.
7. Setting conditions of this device are specified on the label. (Or on the data plate)
8. The accessible parts may be hot when the grill is used. Small children should be kept away.
9. WARNING: This appliance is intended for cooking. It should not be used for other purposes like heating a room.
10. To clean the appliance, do not use steam cleaners.
11. NEVER try to put out the fire with water. Only shut down the device circuit and then cover the flame with a cover or a fire blanket.
12. Children under 8 years of age should be kept away, if they cannot be monitored continuously.
13. Touching the heating elements should be avoided.
14. CAUTION: Cooking process shall be supervised.
    • Cooking process shall always be supervised.
15. The appliance is not suitable for use with an external timer or a separate remote control system.
16. This device can be used by children over 8 years of age, people with physical, hearing or mental challenges or people with lack of experience or knowledge; as long as control is ensured or information is provided regarding the dangers.
17. This device has been designed for household use only.
18. Children must not play with the appliance. Cleaning or user maintenance of the appliance shall not be performed by children unless they are older than 8 years and supervised by adults.
19. Keep the appliance and its power cord away from children less than 8 years old.
20. Put curtains, tulles, paper or any flammable (ignitable) material away from the appliance before starting to use the appliance. Do not put ignitable or flammable materials on or in the appliance.
21. Keep the ventilation channels open.
22. Do not heat closed cans and glass jars. The pressure may lead jars to explode.
23. Do not use the product in states like medicated and/or under influence of alcohol which may affect your ability of judgement.
24. After each use, check if the unit is turned off.
25. Be careful when using alcohol in your foods. Alcohol will evaporate at high temperatures and may catch fire to cause a fire if it comes in contact with hot surfaces.
26. If the appliance is faulty or has a visible damage, do not operate the appliance.
27. Do not put objects that children may reach on the appliance.
28. The packaging materials are dangerous for children. Keep packaging materials away from the reach of children.
29. Cooker supply can be disconnected during any construction work at home. After completing the work, re-connecting the cooker shall be done by authorized service.
30. Do not place metal utensils such as knife, fork, spoon on the surface of the appliance, since they will get hot.
31. To prevent overheating, the appliance should not be installed behind of a decorative cover.
32. Turn off the appliance before removing the safeguards. After cleaning, install the safeguards according to instructions.
33. Cable fixing point shall be protected.
34. CAUTION: If the glass of the stove is broken, turn off any heating element immediately and disconnect the appliance from power source, do not touch the surface of the appliance and do not use the appliance.
35. User should not handle the cooker by himself.
36. When not turning of the cooker during cooking, user can touch hot surfaces causing burns.
37. If heavier loads are places on the cooker, these loads can trip over. It may cause personal injuries.
38. WARNING: As the induction surfaces generate a magnetic field, it may cause harmful effects for people using medical devices such as pacemakers or insulin pumps.
39. WARNING: When induction furnaces are operated at high power or based on the material of the pan base, it may emit certain noises. This is normal.

Electrical Safety

1. Have an authorized electrician set grounding equipment. Our company shall not be responsible for the damages that shall be incurred due to using the product without grounding according to local regulations.
2. WARNING: If the surface is cracked, turn off the appliance to avoid risk of electric shock.
3. Never wash the appliance by spraying or pouring water on it. There is a risk of electrocution.
4. If the power supply cord is damaged, this cord shall be replaced by the manufacturer or its service agent or an equally qualified personnel to prevent a hazardous situation.
5. Do not use cut or damaged cords or extension cords other than the original cord.
6. Do not use steam cleaners for cleaning the appliance, otherwise electric shock may occur.
7. An omnipolar switch capable to disconnect power supply is required for installation. Disconnection from power supply shall be provided with a switch or an integrated fuse installed on fixed power supply according to building code.
8. The power supply cord shall not contact the hot parts of the appliance.
9. Appliance is equipped with a type ‘’Y’’ cord cable.
10. The circuit breaker switches of the cooker shall be placed so that end user can reach them when the cooker is installed.
11. Fixed connections shall be connected to a power supply enabling omnipolar disconnection. For appliances with over voltage category below III, disconnection device shall be connected to fixed power supply according to wiring code.
12. Do not remove ignition switches from the appliance. Otherwise, live electric cables can be accessed. It may cause an electric shock.

Methods for Protecting Ceramic Glass Cooking Surface From Damage

• Ceramic glass surface is not sensitive to heat (up to 650°C) and temperature fluctuations. It is unbreakable and scratch-resistant to a certain degree. However, to avoid any damage, please do the following:

1. Never pour cold water on hot stoves.
2. Do not stand on a ceramic glass plate.
3. Sudden pressure, for example, the effect of a falling salt shaker may be critical. So, do not place such objects on a place above the hobs.
4. After each use, make sure that the base of the cooking pot and surfaces of cooking zones are clean and dry.
5. Do not peel vegetables on the hob surfaces. Sand grains falling from the vegetables may scratch the ceramic glass plate.
6. Do not lay flammable materials such as cardboard or plastic on the oven. Objects such as tin, zinc, or aluminium (as well as aluminium foils or empty coffee pots) may melt on hot cooking surfaces and thus cause damage.
7. Take care not to let sugary foods or fruit juices contact the hot cooking zones.The ceramic glass surface may be stained by these.

Intended Use

1. This product is designed for home use. Commercial use of the appliance is not permitted.
2. This appliance may only be used for cooking purposes. It shall not be used for other purposes like heating a room.
3. The manufacturer assumes no responsibility for any damage due to misuse or mishandling.
4. Operational life of the product you have purchased is 10 years. This is the period for which the spare parts required for the operation of this product as defined is provided by the manufacturer.

Electrical Connection

• WARNING: This hob shall be correctly installed and connected by the authorized service and according to the manufacturer’s instructions. Manufacturer shall not be held responsible for implicitly and explicitly losses due to improper installation and maintenance works.
• WARNING: Manufacturer shall not be held responsible for any losses (such as electric shock) due to a missing or defective protective cable. Insulated parts should be inspected after installation.
• The appliance is designed for electric supply of 220-240 V N AC / 380-415 V 3N AC 50/60 Hz. If your power network does not provide these specifications, contact an electrician or an authorized service.
• Do not allow the power cord of your appliance to contact hot parts of the appliance. Keep it away from sharp edges and corners.

Circuit Breakers

• Power supply should be disconnected from the mains using an all-poles breaker. (Contact gap should be at least 3 mm). This breaker protects against over-current.

Disconnecting from mains

• To disconnect mains power to the appliance;

Fuse elements

• Remove the fuse completely from the base. Or:

Automated fuses

• Press (red) control button to release middle button. Or:

Embedded automated fuses

• Turn it to 0 (OFF) position from 1 (ON) position.
• (Line breaker should be at least B or C type) Or:

FI-circuit breaket (False Induction breaker)

• Turn it to 0 (OFF) position from 1 (ON) position or press inspection button.
• WARNING: Take safety precautions against turning on power unintentionally.

Electrical Connection Scheme

Connect the cables as specified below.

WARNING: 220-240V 50/60 Hz. power supply is suitable for single phase connection, and 380-415V 50/60 Hz. power supply is suitable for double phase connection.

INTRODUCTION OF THE APPLIANCE

1. Upper left cooking area
2. Lower left cooking area
3. Upper right cooking area
4. Lower right cooking area
5. Glass surface
6. Control panel
7. Left cooking area
8. Upper right cooking area
9. Lower right cooking area
10. Glass surface
11. Control panel

Technical Features

• WARNING: For the modification to be done by authorized service, this table should be considered. Manufacturer may not be held responsible for any problems rising because of any faulty modification
• WARNING: In order to increase the product quality, the technical specifications may be changed without prior notice.
  WARNING: The values provided with the appliance or its accompanying documents are laboratory readings in accordance with the respective standards. These values may differ depending on the use and ambient conditions.

INSTALLATION OF COOKTOP

• Check if the electrical installation is proper to bring the appliance in operating condition. If electricity installation is not suitable, call an electrician and plumber to arrange the utilities as necessary. Manufacturer shall not be held responsible for damages caused by operations performed by unauthorized persons.
• WARNING: It is customer’s responsibility to prepare the location the product shall be placed on and also to have the electrical installation prepared.
• WARNING: The rules in local standards about electrical installations shall be followed during product installation.
• WARNING: Check for any damage on the appliance before installing it. Do not have the product installed if it is damaged. Damaged products cause a risk for your safety.

Correct Place For Installation

• Product is designed in accordance with the kitchen counters supplied from market. A safe distance should be left between the product and kitchen walls and furniture.
• If hood/aspirator will be installed over your appliance, obey to the recommendation of hood / aspirator manufacturer for assembly height. (min. 65 cm)
• The gap that cooktop is to be placed on the counter should be cut in line with cooktop installation dimen-sions.
• For installation of the product, the rules specified in local standards related to electricity should be complied.

Application Of A Strip Under The Appliance

• A strip shall be affixed to the bottom of the appliance to prevent substances that may overflow, such as water and oil, from entering the appliance in case of any overflow while cooking and heating.
• Place the appliance on the drain on the countertop by gently pressing it.
• If there is a built-in oven under the appliance, kitchen furniture shall be arranged to allow ventilation.

Installation

• When a product is mounted on a drawer, if it is possible to touch the lower side of the product, this section should be separated with a wooden shelf.
• While mounting the cooktop on a closet, as shown in the figure above, in order to separate between the closet and the cooktop, a shelf should be mounted. If it is mounted on a built-in oven, there is no need to do that.
• If your cooktop will be mounted next to the right or left wall, the minimum distance between the wall and the cooktop should be 50 mm.
• At the back of the furniture as shown below a venting gap of 180 cm² (450 x 40 mm) is required.

Installation Diagram

1. Turn the cooktop down and place on smooth ground.
2. In order to prevent entrance of foreign substances and liquids between cooktop and counter, apply the paste given in package to the sides of lower guard of counter. For corners, curl paste and increase curls till filling corner gaps.
3. Turn cooktop again and align with and place on counter.
4. Fasten up your cooktop on counter by using the clamp and screws supplied.

Counter Cut-Off Sizes

• Note the following values while installing your stove or cutting the counter.
• The gap on which the hob is placed must be cut in accordance with the dimensions of hob installation.

G
H
I| 490 mm

USING YOUR APPLIANCE

1. To turn the device on and off, press and hold the on/off button until you hear a “beep”. When the unit is turned on, the heat zone indicators shall be displayed.
2. The controls react to touching, so you do not need to apply any pressure to the controls.
3. Place a suitable pot, pan, etc. on the cooking area that you want to use.
4. Make sure that the base of the pot, pan, etc. you have placed and the surface of the cooking area are clean and dry.
5. When you touch the heating zone selection control, the indicator next to the key you are touching shall flash.
6. You can set the temperature by touching the sliding control of the heating zone you desire. (Applies to products with slider control, see Fig. 1)
7. Use the bottom, not the tip of your finger while using the device. You shall hear a “beep” at every touch.
8. Make sure that the touch controls are always clean and dry. Even a thin layer of water may make it difficult for touch controls to work.

Selection Of The Right Pot

1. Place suitable amount of food to the pots and pans. Thus, you may prevent overflowing of meals and avoid unnecessary cleaning.
2. Do not use containers that are unstable and that may be easily tipped over on the cooktop.
3. Do not put empty pots and pans on the hobs with their flames on.
4. Do not put containers that may be affected by heat on the product.
5. Do not operate the hobs without any pots and pans placed on them.
6. Do not place the lids of the pots and pans on the hobs.
7. Keep the lid of container you use for heating oil open.
8. Do not put oil with a volume more than one third of the pan. Do not leave the oil unattended when the oil is being heated. Extremely hot oils may cause fire.
9. Use pots and pans with machined bases only. Sharp edges cause scratches on the surface.
10. Glass, ceramic and earthen pots, copper- or aluminium-based non-magnetic stainless steel pots shall not be used.
11. Put the suitable pots by centering them on the hobs.
12. Do not use pots with concave or convex bases.
13. When you want to put the pot on another hob, take the pot up and place it again instead of sliding it.
14. You may use steel, Teflon or special magnet-based aluminum cookware with a label or warning that indicates it is compatible with induction on your induction stove.
15. You can check if the pot is suitable for the induction stove. Move a magnet towards the base of the pot. If it is pulled, your pot is suitable for an induction stove.
16. It is important that you use metal cookware specially designed and /or approved for induction stoves.

WARNING: Do not allow melamine or plastic containers to come into contact with the heating zones.
Cooking Applications
Use your appliance at a suitable heating setting for cooking.

CAUTION: Information on the table above is only for guidance.

Hobs

CAUTION: Cooking information provided on the table are for informative purposes only.

CLEANING AND MAINTENANCE OF THE APPLIANCE

1. Always unplug the appliance before starting any maintenance or cleaning. Wait until the stove cools down if it is hot.
2. Do not use abrasive clothes, spray cleaners or sharp objects for the cleaning of the glass tray.
3. Clean remains of burnt food with a damp, soapy cloth. Dust on the surface shall be cleaned with a damp cloth.
4. Discolourations that may occur on the ceramic glass surface do not affect the functional structure and permanence of the glass. Discolouration is not caused by a change in the material, but it is due to the fact that burnt remains on the surface are not cleaned, that the pots used wear the glass surface and that unsuitable cleaning materials are used.
5. To ensure that your stove has a long economic life, it shall be regularly cleaned and maintained.
6. Do not clean your stove with hard tools such as a hard brush, steel wool or a knife. Do not use abrasive and acidic materials or detergents.
7. After cleaning the parts of the appliance with a soapy cloth, rinse and dry them thoroughly with a soft cloth.
8. Clean glass surfaces with special glass cleaning materials. Do not use abrasive cleaners or sharp metal scrapers to clean the glass surfaces as the scratching of the glass surfaces may cause the glass to break.
9. Do not clean your stove using steam cleaners.
10. Do not use flammable materials such as acids, thinner or gas to clean your stove.
11. Do not wash any component of your stove in a dishwasher.
12. Quickly clean any material containing vinegar, lemon, salt, coke and similar acids and alkalines that spill over your stove.

RECOMMENDATIONS FOR ENERGY SAVING

1. Induction cooking zones automatically adapts to the size of the pot base to some extent.
2. Place the pot in the cooking zone before turning the heater on. The induction heaters have a sensor that detects the presence of a pot.
3. Use pots with their lids closed to shorten the cooking times.
4. Lower the heating setting when it starts to boil.Do not exceed the amount of water and oil to shorten the cooking time.
5. Use your appliance at a suitable heating setting for cooking.

HANDLING RULES

1. Handle and transport in the original packaging.
2. Pay maximum attention to the appliance while loading / unloading and handling.
3. Make sure that the packaging is securely closed during handling and transportation.
4. Protect the appliance from external factors (such as humidity, water, etc.) that may damage the packaging.
5. Be careful not to damage the appliance due to bumps, crashes, drops, etc. while handling and transporting and not to break or deform it during operation.

TROUBLESHOOTING

You may solve the problems you may encounter with your product by checking the following points before calling the technical service.

If the Appliance Does Not Operate

1. Examine with safe ways if electric exists on network.
2. Audit fuses.
3. Control whether damage is available on power cable.

Error Codes, Reasons and Recommended Solutions

Problem

| ****

Possible cause

| ****

What to do

---|---|---

F3 / F4

| Induction stove coil temperature sensor error.| ****

Please contact the manufacturer.

F9 / FA

| ****

IGBT temperature sensor error.

| ****

Please contact the manufacturer.

E1 / E2

| ****

Improper supply voltage.

| Please check whether the supply voltage is normal.

E3

| Induction stove coil temperature sensor high temperature warning| ****

Please contact the manufacturer.

E5

| IGBT temperature sensor high temperature warning.| Please start cooking again after the pot is cooled.

ENVIRONMENTALLY-FRIENDLY DISPOSAL

• Dispose of packaging in an environmentally-friendly manner.
• This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE).
• The guideline determines the frame work for the return and recycling of used appliances as applicable throughout to the EU.

PACKAGE INFORMATION

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

• Importer/Organization authorized to accept claims from buyers: LLC “SIMRUS” INN 7717705825, KPP 771901001, OGRN 1117746641891 Legal/actual address: 105318, Moscow, Tkatskaya st. 5, building 7, floor 2
• If a warranty claim occurs, you must contact authorized service centers. A list of authorized service centers in your city is indicated in this instruction manual.
• If there is no authorized service center in your city, you should contact the store where you purchased the product.
• You can get information about service in your city by calling: 8 (495) 969-02-86, 969-02-87
• Warranty period – 24 months
• Service life – 10 years
• Date of manufacture – indicated on the product

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>